Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE › 2014.08–2015.08
RM2660E _54 Brake _052823 PARKING BRAKE _0255434 PARKING BRAKE CABLE A

PARKING BRAKE  PARKING BRAKE CABLE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LH side and RH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 2.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C172183

Remove the 2 bolts and disconnect the rear disc brake cylinder.

NOTICE:
·

Do not disconnect the flexible hose from the disc brake cylinder.

·

Do not twist or bend the flexible hose.




b.

Hang the disc brake cylinder with a piece of wire.


Hide 42431 3.REMOVE REAR DISC

Hide 4.REMOVE PARKING BRAKE SHOE RETURN SPRING

Hide 46580 5.REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

Hide 46590 6.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

Hide 7.REMOVE PARKING BRAKE SHOE LEVER LH

Hide 46430 8.DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

Hide 491B2 10.REMOVE REAR NO. 2 SUSPENSION CONTROL ACCUMULATOR BRACKET

Hide 58812A 11.REMOVE LOWER CONSOLE BOX (w/o Console Box Lid)

Hide 88520 12.REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

Hide 58901A 13.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

Hide 46420 14.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY

a.
C170906

Loosen the adjusting nut.


b.
C226757

Disconnect the No. 2 parking brake cable from the No. 1 parking brake pull rod.


c.
C172839

Pinch the claws of the No. 2 parking brake cable and push the cable outside of the vehicle slightly.


d.

Tilt the fuel tank (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL TANK>REMOVAL) so that bolt A in the illustration can be removed.

C170911E06
1.885,2.427 2.604,2.427 true 2.625,2.344 3.927,2.667 1.302,0.323 10 false No. 2 Parking Brake Cable Clamp 1.24,0.74 1.365,0.885 0.125,0.146 10 false A


e.

Remove the 6 bolts and No. 2 parking brake cable.


f.

Remove the No. 2 parking brake cable clamp from the No. 2 parking brake cable.


Hide 46430 15.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.
C170906

Loosen the adjusting nut.


b.
C226757

Disconnect the No. 3 parking brake cable from the No. 1 parking brake pull rod.


c.
C170907

Pinch the claws of the No. 3 parking brake cable and push the cable outside of the vehicle slightly.


d.

Remove the 6 bolts and No. 3 parking brake cable.

C170910E04
1.906,1.385 2.208,1.01 2.208,1.01 2.26,1.01 true 2.313,0.927 4.469,1.115 2.156,0.188 10 false No. 3 Parking Brake Cable Clamp


e.

Remove the No. 3 parking brake cable clamp from the No. 3 parking brake cable.