Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › from 2021.07
RM38G0E _58 Vehicle Interior _100766 HEATING / AIR CONDITIONING _0467925 AIR CONDITIONING SYSTEM J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  Air Conditioning Compressor Magnetic Clutch Circuit  


DESCRIPTION

The air conditioning amplifier assembly outputs the magnet clutch on request signal to the ECM. The ECM sends a magnet clutch on permission signal to the air conditioning amplifier assembly. The air conditioning amplifier assembly turns the magnet clutch on based on this signal.

WIRING DIAGRAM

E470767E01
2.354,1.292 2.813,1.531 0.458,0.24 10 false ECM 6.052,2.396 6.531,2.583 0.479,0.188 10 false MGC 5.646,2.531 6.125,2.719 0.479,0.188 10 false I32 5.646,0.708 6.125,0.896 0.479,0.188 10 false 19 6.052,0.354 6.531,0.542 0.479,0.188 10 false ACT 5.698,0.24 6.177,0.427 0.479,0.188 10 false 3 6.063,0.813 6.542,1 0.479,0.188 10 false AC1 5.625,2.292 6.104,2.479 0.479,0.188 10 false 19 5.531,3.771 7.104,4.302 1.573,0.531 10 false Air Conditioning Amplifier Assembly 1.906,3.26 2.729,3.438 0.823,0.177 10 false B57 1.906,3.438 4.708,3.635 2.802,0.198 10 false Semiconductor Power Integration ECU 3.417,0.229 3.896,0.417 0.479,0.188 10 false 52*2 3.458,0.708 3.938,0.896 0.479,0.188 10 false 61*2 2.99,0.708 3.469,0.896 0.479,0.188 10 false 9*1 2.927,0.229 3.406,0.417 0.479,0.188 10 false 17*1 3.885,4.281 4.365,4.469 0.479,0.188 10 false MG+ 4.417,4.281 4.896,4.469 0.479,0.188 10 false 1 2.531,4.708 4.177,4.958 1.646,0.25 10 false Magnet Clutch Assembly 2.5,5.094 4.01,5.292 1.51,0.198 10 false C39 0.073,4.698 1.813,4.927 1.74,0.229 10 false *1: for 1GR-FE 2.5,5.281 5.448,5.531 2.948,0.25 10 false Cooler Compressor Assembly 5.646,0.927 6.125,1.115 0.479,0.188 10 false I33 5.656,0.469 6.135,0.656 0.479,0.188 10 false I33 3.031,0.469 3.51,0.656 0.479,0.188 10 false B2 3.031,0.938 3.51,1.125 0.479,0.188 10 false B2 3.5,0.469 3.979,0.656 0.479,0.188 10 false B1 3.5,0.938 3.979,1.125 0.479,0.188 10 false B1 2.521,0.469 3,0.656 0.479,0.188 10 false ACT 2.531,0.906 3.01,1.094 0.479,0.188 10 false AC1 3.427,2.427 3.906,2.615 0.479,0.188 10 false -S 3.438,2.854 3.917,3.042 0.479,0.188 10 false L 3.719,2.427 4.198,2.615 0.479,0.188 10 false 5 3.719,2.854 4.198,3.042 0.479,0.188 10 false 4 0.073,5.073 1.813,5.302 1.74,0.229 10 false *2: for V35A-FTS 3.083,2.958 3.563,3.146 0.479,0.188 10 false IPD 2.24,2.75 2.719,2.938 0.479,0.188 10 false CPU 2.927,2.531 3.406,2.719 0.479,0.188 10 false IC 6.708,0.188 7.01,0.406 0.302,0.219 10 false +B 0.083,5.417 1.823,5.646 1.74,0.229 10 false *3: for F33A-FTV 3.938,0.469 4.417,0.656 0.479,0.188 10 false B70 3.938,0.927 4.417,1.115 0.479,0.188 10 false B70 3.938,0.229 4.417,0.417 0.479,0.188 10 false 33*3 3.938,0.708 4.417,0.896 0.479,0.188 10 false 34*3

PROCEDURE

1.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
a.

Remove the air conditioning amplifier assembly with its connectors still connected.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING AMPLIFIER>REMOVAL

E445156C07
3.708,0.344 4.135,0.594 0.427,0.25 3.354,1.958 3.594,1.958 3.594,1.958 3.771,1.417 true 0.083,0.094 0.396,0.25 0.313,0.156 10 false *a 3.813,0.396 4.271,0.594 0.458,0.198 10 false I32 2.958,1.896 3.573,2.094 0.615,0.198 10 false MGC
*a Component with harness connected
(Air Conditioning Amplifier Assembly)
- -



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition

Click Location & Routing(I32)Location & Routing

Click Connector(I32)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Amplifier Assembly

I32-19 (MGC) - Body ground
·

Engine running

·

Blower switch: LO

·

A/C switch: On (magnet clutch on)


Below 1 V
I32-19 (MGC) - Body ground
·

Engine running

·

Blower switch: LO

·

A/C switch : Off or on (magnet clutch off)


11 to 14 V



Result:
Proceed to
OK
NG



OK

2.READ VALUE USING GTS

NG

9.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - SEMICONDUCTOR POWER INTEGRATION ECU)
2.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Magnetic Clutch Fuse Shut Off Status Magnet clutch assembly fuse shut off status OFF/ON OFF: Fuse has no shut off history
ON: Fuse has shut off history
-
Body Electrical > Power Integration No.1 > Data List
Tester Display
Magnetic Clutch Fuse Shut Off Status
50003 473 422
OK:

OFF is displayed on the GTS.



Result:
Proceed to
OK
NG



OK

3.READ VALUE USING GTS

NG

7.READ VALUE USING GTS
3.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Magnetic Clutch Input Signal Magnet clutch assembly input signal OFF/ON OFF: Magnet clutch assembly signal not input
ON: Magnet clutch assembly signal input
-
Body Electrical > Power Integration No.1 > Data List
Tester Display
Magnetic Clutch Input Signal
50003 473 419
OK:

ON is displayed on the GTS.



Result:
Proceed to
OK
NG



OK

4.READ VALUE USING GTS

NG

REPLACE SEMICONDUCTOR POWER INTEGRATION ECU

4.READ VALUE USING GTS
a.

Read the Data List according to the display on the GTS.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Magnetic Clutch Output Signal Magnet clutch assembly output signal OFF/ON OFF: Magnet clutch assembly off
ON: Magnet clutch assembly on
-
Body Electrical > Power Integration No.1 > Data List
Tester Display
Magnetic Clutch Output Signal
50003 473 420
OK:

ON is displayed on the GTS.



Result:
Proceed to
OK
NG



OK

5.INSPECT COOLER COMPRESSOR ASSEMBLY

NG

REPLACE SEMICONDUCTOR POWER INTEGRATION ECU

6.CHECK HARNESS AND CONNECTOR (COOLER COMPRESSOR ASSEMBLY - SEMICONDUCTOR POWER INTEGRATION ECU)

OK

REPLACE SEMICONDUCTOR POWER INTEGRATION ECU

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

7.READ VALUE USING GTS
a.

Disconnect the C39 compressor with magnet clutch connector.


b.

Read the Data List according to the display on the GTS.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Magnetic Clutch Fuse Shut Off Status Magnet clutch assembly fuse shut off status OFF/ON OFF: Fuse has no shut off history
ON: Fuse has shut off history
-
Body Electrical > Power Integration No.1 > Data List
Tester Display
Magnetic Clutch Fuse Shut Off Status
50003 473 422
OK:

OFF is displayed on the GTS.



Result:
Proceed to
OK
NG



OK

NG

8.CHECK HARNESS AND CONNECTOR (COOLER COMPRESSOR ASSEMBLY - SEMICONDUCTOR POWER INTEGRATION ECU)
8.CHECK HARNESS AND CONNECTOR (COOLER COMPRESSOR ASSEMBLY - SEMICONDUCTOR POWER INTEGRATION ECU)
a.

Disconnect the C39 cooler compressor assembly connector.


b.

Disconnect the B57 semiconductor power integration ECU connector.



Result:
Proceed to
OK
NG



OK

REPLACE SEMICONDUCTOR POWER INTEGRATION ECU

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

9.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - SEMICONDUCTOR POWER INTEGRATION ECU)
a.

Disconnect the I33 air conditioning amplifier assembly connector.


b.

Disconnect the B57 semiconductor power integration ECU connector.



Result:
Proceed to
OK
NG



OK

10.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - ECM)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

10.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - ECM)
a.

Disconnect the I33 air conditioning amplifier assembly connector.


b.

Disconnect the B2*1, B1*2 or B70*3 ECM connector.

*1: for 1GR-FE

*2: for V35A-FTS

*3: for F33A-FTV



c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for 1GR-FE:
Tester Connection Condition Specified Condition

Click Location & Routing(I33,B2)Location & Routing

Click Connector(I33)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Amplifier Assembly

Click Connector(B2)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>ECM

I33-19 (AC1) - B2-9 (AC1) Always Below 1 Ω
I33-3 (ACT) - B2-17 (ACT) Always Below 1 Ω
I33-19 (AC1) or B2-9 (AC1) - Other terminals and body ground Always 10 kΩ or higher
I33-3 (ACT) or B2-17 (ACT) - Other terminals and body ground Always 10 kΩ or higher

for V35A-FTS:
Tester Connection Condition Specified Condition

Click Location & Routing(I33,B1)Location & Routing

Click Connector(I33)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Amplifier Assembly

Click Connector(B1)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>ECM

I33-19 (AC1) - B1-61 (AC1) Always Below 1 Ω
I33-3 (ACT) - B1-52 (ACT) Always Below 1 Ω
I33-19 (AC1) or B1-61 (AC1) - Other terminals and body ground Always 10 kΩ or higher
I33-3 (ACT) or B1-52 (ACT) - Other terminals and body ground Always 10 kΩ or higher

for F33A-FTV:
Tester Connection Condition Specified Condition

Click Location & Routing(I33,B70)Location & Routing

Click Connector(I33)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Amplifier Assembly

Click Connector(B70)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>ECM

I33-19 (AC1) - B70-34 (AC1) Always Below 1 Ω
I33-3 (ACT) - B70-33 (ACT) Always Below 1 Ω
I33-19 (AC1) or B70-34 (AC1) - Other terminals and body ground Always 10 kΩ or higher
I33-3 (ACT) or B70-33 (ACT) - Other terminals and body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

11.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

11.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
a.

Remove the air conditioning amplifier assembly with its connectors still connected.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING AMPLIFIER>REMOVAL

E445156C08
5.104,0.365 5.563,0.615 0.458,0.25 6.438,2.24 6.146,2.24 6.146,2.24 5.833,1.438 true 0.073,0.094 0.385,0.25 0.313,0.156 10 false *a 5.24,0.417 5.698,0.615 0.458,0.198 10 false I33 6.49,2.135 7.104,2.333 0.615,0.198 10 false AC1
*a Component with harness connected
(Air Conditioning Amplifier Assembly)
- -



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition

Click Location & Routing(I33)Location & Routing

Click Connector(I33)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Amplifier Assembly

I33-19 (AC1) - Body ground
·

Engine running

·

Blower switch: On (LO level)

·

A/C switch: On


Below 1 V
I33-19 (AC1) - Body ground
·

Engine running

·

Blower switch: On (LO level)

·

"A/C" switch: Off


11 to 14 V



Result:
Proceed to
OK
NG



OK

NG

12.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
12.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
a.

Remove the air conditioning amplifier assembly with its connectors still connected.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING AMPLIFIER>REMOVAL

E445156C09
5.135,0.344 5.594,0.594 0.458,0.25 4.49,0.344 4.74,0.344 4.74,0.344 4.927,1.073 true 0.073,0.094 0.385,0.25 0.313,0.156 10 false *a 5.26,0.385 5.719,0.583 0.458,0.198 10 false I33 4.177,0.25 4.792,0.448 0.615,0.198 10 false ACT
*a Component with harness connected
(Air Conditioning Amplifier Assembly)
- -



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition

Click Location & Routing(I33)Location & Routing

Click Connector(I33)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Amplifier Assembly

I33-3 (ACT) - Body ground
·

Engine running

·

Blower switch: On (LO level)

·

A/C switch: Off or on (magnet clutch off)


Below 1 V
I33-3 (ACT) - Body ground
·

Engine running

·

Blower switch: On (LO level)

·

A/C switch: On (magnet clutch on)


4.5 to 5.5 V



Result:
Proceed to
OK
NG



OK

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

NG