27280 1.REMOVE GENERATOR SPLASH GUARD COVER ASSEMBLY
27020 2.REMOVE GENERATOR ASSEMBLY
44774 3.DISCONNECT UNION TO CONNECTOR TUBE HOSE
29300 4.REMOVE VACUUM PUMP ASSEMBLY
15301 5.REMOVE ENGINE OIL LEVEL DIPSTICK
12142 6.REMOVE NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE
11452 7.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
17167 8.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
17168 9.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
Remove the 3 bolts and No. 2 exhaust manifold heat insulator.
17106 10.REMOVE EXHAUST CROSSOVER PIPE SUB-ASSEMBLY
17118 11.REMOVE MANIFOLD STAY
17119 12.REMOVE NO. 2 MANIFOLD STAY
17141 13.REMOVE EXHAUST MANIFOLD RH
15407 14.DISCONNECT TURBO OIL INLET PIPE SUB-ASSEMBLY
15474A 15.REMOVE TURBO OIL OUTLET HOSE
17293 16.REMOVE TURBOCHARGER STAY
17361J 17.REMOVE NO. 1 AIR TUBE
16027 18.REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY
17878 19.REMOVE NO. 3 INTAKE AIR CONNECTOR PIPE
17142 20.REMOVE EXHAUST MANIFOLD LH WITH TURBOCHARGER SUB-ASSEMBLY
16630H 21.REMOVE IDLER PULLEY ASSEMBLY (w/o Air Conditioning System)
Remove the 3 bolts and idler pulley assembly.
25708 22.REMOVE NO. 3 VACUUM TRANSMITTING PIPE SUB-ASSEMBLY
Remove the 3 bolts and disconnect the No. 3 vacuum transmitting pipe sub-assembly.
12325A 23.REMOVE TRANSVERSE ENGINE MOUNTING BRACKET LH
Remove the 4 bolts and transverse engine mounting bracket LH.
12315A 24.REMOVE TRANSVERSE ENGINE MOUNTING BRACKET RH
Remove the 4 bolts and transverse engine mounting bracket RH.
16283 25.REMOVE NO. 6 WATER BY-PASS HOSE
23764A 26.REMOVE NO. 4 NOZZLE LEAKAGE PIPE
23763 27.DISCONNECT NO. 3 NOZZLE LEAKAGE PIPE
Slide the clamp and disconnect the No. 1 fuel hose from the fuel cooler assembly.
23920A 28.REMOVE FUEL COOLER ASSEMBLY
16268 29.REMOVE NO. 1 WATER BY-PASS PIPE
17111 30.REMOVE INTAKE MANIFOLD
17112 31.REMOVE NO. 2 INTAKE MANIFOLD
28100 32.REMOVE STARTER ASSEMBLY
19850 33.REMOVE GLOW PLUG ASSEMBLY
17946 34.REMOVE NO. 2 INTERCOOLER SUPPORT BRACKET
Remove the 2 bolts and No. 2 intercooler support bracket.
17945 35.REMOVE INTERCOOLER SUPPORT BRACKET
Remove the 2 bolts and intercooler support bracket.
36.REMOVE NO. 3 ENGINE HANGER
Remove the 2 bolts and No. 3 engine hanger.
15409F 37.REMOVE OIL FILTER OUTLET PIPE SUB-ASSEMBLY
Remove the 4 bolts and oil filter outlet pipe sub-assembly.
Remove the 2 gaskets.
89422C 38.REMOVE ENGINE COOLANT TEMPERATURE SENSOR
Remove the engine coolant temperature sensor and gasket.
16331 39.REMOVE WATER OUTLET
Remove the 2 bolts and disconnect the water outlet and gasket.
Slide the clamp and disconnect the No. 2 water hose joint from the No. 1 water outlet pipe.
40.REMOVE WATER OUTLET PIPE
Remove the 4 bolts, water outlet pipe and 2 gaskets.
16332 41.SEPARATE NO. 1 AND NO. 2 WATER OUTLET PIPES AND WATER BY-PASS OUTLET SUB-ASSEMBLY
Remove the 2 bolts and No. 1 water outlet pipe from the No. 2 water outlet pipe.
Slide the clamp and disconnect the water hose joint from the No. 2 water outlet pipe.
Slide the clamp and remove the water hose joint from the water by-pass outlet sub-assembly.
16307A 42.REMOVE FAN BRACKET SUB-ASSEMBLY
16603B 43.REMOVE IDLER PULLEY SUB-ASSEMBLY
16620D 44.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
16321 45.REMOVE WATER INLET
16331A 46.REMOVE THERMOSTAT
16262 47.DISCONNECT WATER INLET HOSE
Slide the clamp and disconnect the water inlet hose from the timing chain cover sub-assembly.
48.SET NO. 1 CYLINDER TO TDC/COMPRESSION
| *a | Timing Mark |
Align the timing mark of the crankshaft pulley and timing chain cover sub-assembly and chain cover and compressor bracket sub-assembly.
12502 49.REMOVE CHAIN COVER AND COMPRESSOR BRACKET SUB-ASSEMBLY
Detach the wire harness clamp.
Remove the bolt and the chain cover and compressor bracket sub-assembly.
50.REMOVE ENGINE WIRE BRACKET
89491 51.REMOVE ENGINE OIL LEVEL SENSOR