Home › Engine / Hybrid System › 1NZ-FXE (LUBRICATION) › OIL PUMP › 2011.12–2014.12
RM2170E _51 Engine / Hybrid System _057010 1NZ-FXE LUBRICATION _0277980 OIL PUMP A

1NZ-FXE LUBRICATION  OIL PUMP  REMOVAL  


PROCEDURE

Hide 25680 3.REMOVE EGR VALVE WITH COOLER ASSEMBLY

Hide 11201 7.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

Hide 11452 11.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.
A266945

Remove the bolt and engine oil level dipstick guide.


b.

Remove the O-ring from the engine oil level dipstick guide.


Hide 12315A 12.REMOVE ENGINE MOUNTING BRACKET RH

a.
A266946

Remove the 4 bolts and engine mounting bracket RH.


Hide 13.REMOVE SCREW PLUG

a.
A266922

Using a 8 mm hexagon socket wrench, remove the screw plug.


Hide 15100 14.REMOVE TIMING CHAIN COVER

a.
A266812

Remove the 18 bolts, nut and 2 wire harness clamp brackets.


b.
A266950E01
0.418,1.214 0.575,1.371 0.157,0.157 10 *1 0.509,0.541 0.509,1.204 false

Remove the timing chain cover by prying between the timing chain cover and oil pan, cylinder head or cylinder block with a screwdriver.

Text in Illustration
*1 Protective Tape

NOTICE:

Be careful not to damage the contact surfaces of the timing chain cover, oil pan, cylinder block, and cylinder head.


HINT:

Tape the screwdriver tip before use.



c.
A265759

Remove the 2 O-rings from the cylinder block and oil pan.


Hide 15100C 15.REMOVE OIL PUMP SEAL

a.
A156383E01
0.23,0.181 0.391,0.332 0.162,0.150 10 *2 1.825,1.579 1.987,1.730 0.162,0.150 10 *1 0.429,0.26 1.379,0.26 1.379,0.26 1.379,0.384 false 0.553,1.127 0.553,0.26 false 1.612,0.818 1.914,1.444 1.914,1.444 1.914,1.567 false

Using a screwdriver and wooden block, remove the oil pump seal.

Text in Illustration
*1 Protective Tape
*2 Wooden Block

NOTICE:

Do not damage the surface of the oil seal press fit hole.


HINT:

Tape the screwdriver tip before use.