1.RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM
2.REMOVE FRONT BUMPER ASSEMBLY (w/o Wheel Opening Moulding)
3.REMOVE FRONT BUMPER ASSEMBLY (w/ Wheel Opening Moulding)
53289A
4.REMOVE RADIATOR SUPPORT OPENING COVER (w/o Wheel Opening Moulding)
53289A
5.REMOVE RADIATOR SUPPORT OPENING COVER (w/ Wheel Opening Moulding)
53286B
6.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/o Wheel Opening Moulding)
53286B
7.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/ Wheel Opening Moulding)
53285B
8.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/o Wheel Opening Moulding)
53285B
9.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/ Wheel Opening Moulding)
53288B
10.REMOVE RADIATOR SUPPORT EXTENSION LH (w/o Wheel Opening Moulding)
53288B
11.REMOVE RADIATOR SUPPORT EXTENSION LH (w/ Wheel Opening Moulding)
53287B
12.REMOVE RADIATOR SUPPORT EXTENSION RH (w/o Wheel Opening Moulding)
53287B
13.REMOVE RADIATOR SUPPORT EXTENSION RH (w/ Wheel Opening Moulding)
52611
14.REMOVE FRONT BUMPER ENERGY ABSORBER (w/o Wheel Opening Moulding)
52611
15.REMOVE FRONT BUMPER ENERGY ABSORBER (w/ Wheel Opening Moulding)
53936D
16.REMOVE FRONT END PANEL PROTECTOR LH (w/o Wheel Opening Moulding)
w/ Front Spoiler:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/o Wheel Opening Moulding)>DISASSEMBLY
52131A
17.REMOVE FRONT BUMPER REINFORCEMENT (w/o Wheel Opening Moulding)
52131A
18.REMOVE FRONT BUMPER REINFORCEMENT (w/ Wheel Opening Moulding)
53510
19.REMOVE HOOD LOCK ASSEMBLY
53208A
20.REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY
Disconnect the connector.
Remove the 2 bolts and hood lock support sub-assembly.
53205
21.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
16712
22.REMOVE NO. 2 FAN SHROUD
88711
23.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88706
24.DISCONNECT LIQUID PIPE SUB-ASSEMBLY
Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.
Remove the O-ring from the liquid pipe sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88460
25.REMOVE COOLER CONDENSER ASSEMBLY
Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.
Do not damage the condenser or radiator when removing the cooler condenser assembly.
88467
26.REMOVE NO. 1 COOLER CONDENSER CUSHION
Remove the 4 No. 1 cooler condenser cushions from the cooler condenser assembly.