Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2013.11
RM30B0U _56 Audio / Visual / Telematics _009403 AUDIO / VIDEO _0054849 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) T

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  PROBLEM SYMPTOMS TABLE  


NOTICE:

After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Display Function
Symptom Suspected Area Link
Pressing power switch does not turn on system Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Black screen (No image appears on the screen) Proceed to "Black Screen" Click here
Proceed to "Check Software Error History" in Operation Check Click here
Radio and display receiver assembly Click here
Display does not dim (does not change to night screen) with tail switch on Proceed to "Display does not Dim when Light Control Switch is Turned ON" Click here
Proceed to "Illumination Circuit" Click here
Radio and display receiver assembly Click here
Power does not turn off (Screen remains on) Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Screen is distorted Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Screen flicker or color distortion Proceed to "Screen Flicker or Color Distortion" Click here
Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Parking brake switch signal does not change in vehicle signal check mode Proceed to "Parking Brake Switch Circuit" Click here
Radio and display receiver assembly Click here
Reverse signal does not change in vehicle signal check mode Proceed to "Reverse Signal Circuit" Click here
Radio and display receiver assembly Click here

Panel Switch and Touch Switch Function
Symptom Suspected Area Link
Illumination for panel switches does not come on with tail switch on Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON" Click here
Proceed to "Illumination Circuit" Click here
Radio and display receiver assembly Click here
Panel switches do not function Proceed to "Panel Switches do not Function" Click here
Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here
Touch panel switch does not function Proceed to "Touch Panel Switch does not Function" Click here
Proceed to "Radio Receiver Power Source Circuit" Click here
Radio and display receiver assembly Click here

Steering Pad Switch Function
Symptom Suspected Area Link
System cannot be operated by steering pad switch Proceed to "Panel Switches do not Function" Click here
Proceed to "Steering Pad Switch Circuit" Click here
Radio and display receiver assembly Click here
Illumination for steering pad switch does not come on with tail switch on Proceed to "Illumination Circuit" Click here
Radio and display receiver assembly Click here

General Audio Function
Symptom Suspected Area Link
No sound can be heard from speakers Proceed to "No Sound can be Heard from Speakers" Click here
Proceed to "Speaker Circuit" Click here
Radio and display receiver assembly Click here
Abnormal noise occurs Proceed to "Noise Occurs" Click here
Radio and display receiver assembly Click here
Sound quality is bad in all modes (Volume is too low) Check that the ASL function is off -
Proceed to "Poor Sound Quality in All Modes (Low Volume)" Click here
Proceed to "Speaker Circuit" Click here
Radio and display receiver assembly Click here
ASL does not function Check that the ASL function is on -
Proceed to "Speed Signal Circuit" Click here
Radio and display receiver assembly Click here
Voice guidance does not function Proceed to "Voice Guidance does not Function" Click here
Proceed to "Speaker Circuit" Click here
Radio and display receiver assembly Click here

FM or AM Radio Function
Symptom Suspected Area Link
Radio broadcast cannot be received or poor reception Proceed to "Radio Broadcast cannot be Received or Poor Reception" Click here
Radio broadcast can be received but radio station cannot be displayed (Some radio stations do not provide their name information) Radio and display receiver assembly Click here
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers Check the volume settings -
Radio and display receiver assembly Click here
Radio broadcast can be received but station list cannot be displayed Wait for 120 seconds in radio mode, and select the "Refresh" switch on the station list screen -
Radio and display receiver assembly Click here
Radio broadcast can be received but station list cannot be displayed Select the "Refresh" switch on the station list screen -
Wait for 10 minutes with the ignition switch turned to ACC, and select the "Refresh" switch on the station list screen again -
Radio and display receiver assembly Click here
After the voice recognition function or hands-free function is turned off, the cache radio does not operate Check that the cache radio setting is on -
Radio and display receiver assembly Click here
When the cache radio is playing, sound is interrupted, sound cannot be heard or sound quality is poor Check if similar symptoms occur when receiving conventional FM/AM radio broadcasts -
Check if similar symptoms occur when receiving other broadcasts -
Move the vehicle to a place where the reception sensitivity is good and check again -
Radio and display receiver assembly Click here
When the cache radio is playing, sound can be heard, but no information is displayed (some radio stations do not provide their name information) Check if similar symptoms occur when receiving other broadcasts -
Move the vehicle to a place where the reception sensitivity is good and check again -
Radio and display receiver assembly Click here

HD Radio Function
Symptom Suspected Area Link
Only "HD Radio" stations cannot be heard or selected, or their analog or digital sound cannot be changed Check the "HD Radio" settings -
Radio and display receiver assembly Click here
"iPod" tagging function cannot be used Check if a message indicating that the capacity for tag information is full is displayed -
Check that the cache radio is not playing (when the cache radio is playing, "iPod" tagging function cannot be used) -
Proceed to "USB Audio System Recognition/ Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
When the HD radio is playing, cover art may not be displayed When a song unregistered to the Gracenote CDDB is playing or cover art information is not provided by the broadcast station, its cover art cannot be displayed -
When the HD radio is playing, cover art cannot be displayed Radio and display receiver assembly Click here
Broadcast station logo cannot be displayed Check if similar symptoms occur when receiving other broadcasts -
Check if similar symptoms occur with another vehicle -
Radio and display receiver assembly Click here
SPS channel cannot be selected Check that HD radio FM mode is selected -
After pressing the "Refresh" switch, check that the SPS channel is on the station list -
Radio and display receiver assembly Click here
When the SPS channel is selected, sound cannot be heard After pressing the "Refresh" switch, select the SPS channel on the station list -
Radio and display receiver assembly Click here

SDARS System Function (w/ SDARS System)
Symptom Suspected Area Link
Satellite radio broadcast cannot be received or reception is bad Proceed to "Satellite Radio Broadcast cannot be Received" Click here
Radio and display receiver assembly Click here
Satellite radio cannot receive pay type broadcasts Proceed to "Satellite Radio Broadcast cannot be Received" Click here
Radio and display receiver assembly Click here
Satellite radio broadcast cannot be selected or after selecting broadcast, broadcast cannot be added into memory Proceed to "Satellite Radio Broadcast cannot be Received" Click here
Proceed to "Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory" Click here
Radio and display receiver assembly Click here
Satellite radio can be displayed but radio broadcast cannot be heard from speakers Check the volume settings -
Proceed to "Satellite Radio Broadcast cannot be Received" Click here
Radio and display receiver assembly Click here
Broadcast station logo cannot be displayed Proceed to "Satellite Radio Broadcast cannot be Received" Click here
Proceed to "Data Signal Circuit between Radio Receiver and Extension Module" Click here
Stereo component tuner assembly Click here
Radio and display receiver assembly Click here
Satellite radio text information cannot be displayed Proceed to "Satellite Radio Broadcast cannot be Received" Click here
Stereo component tuner assembly Click here
Radio and display receiver assembly Click here
Satellite radio broadcast station cannot be selected (scan cannot be performed) Proceed to "Satellite Radio Broadcast cannot be Received" Click here
Stereo component tuner assembly Click here
Radio and display receiver assembly Click here
When the satellite radio is playing, some cover art may not be displayed When a song unregistered to the Gracenote CDDB is playing, its cover art cannot be displayed -
When the satellite radio is playing, cover art cannot be displayed Radio and display receiver assembly Click here

CD Player Function
Symptom Suspected Area Link
Disc cannot be played or player does not function with disc Proceed to "Disc Player Outline" in System Description and check if the disc is compatible with the disc player Click here
Proceed to "Check Optical Disc Error History" in Operation Check Click here
Radio and display receiver assembly Click here
CD cannot be inserted/played or CD is ejected right after insertion Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "CD cannot be Inserted / Played or CD is Ejected Right After Insertion" Click here
CD cannot be ejected Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "CD cannot be Ejected" Click here
CD sound skips Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "CD Sound Skips" Click here
Sound quality is bad only when CD is played (Volume is too low) Proceed to "Check Optical Disc Error History" in Operation Check Click here
Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" Click here

AUX Function
Symptom Suspected Area Link
External device sound cannot be heard or sound quality is bad (Stereo jack is used) Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
"AUX" is not displayed on system check mode screen Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here

"Bluetooth" Hands-free Function
Symptom Suspected Area Link
"Bluetooth" is inoperative (In-vehicle device cannot be recognized by the cellular phone) Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
"Bluetooth" compatible cellular phone cannot be registered Proceed to "Cellular Phone Registration Failure" Click here
"Bluetooth" compatible cellular phone cannot be connected Check that no other cellular phone is connected as a hands-free device -
Bring the cellular phone near the in-vehicle device and reconnect it -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually) Check that "Bluetooth" automatic connection setting of the in-vehicle device is on -
Radio and display receiver assembly Click here
"Bluetooth" compatible cellular phone connection is disconnected Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Message that prompts to check the cellular phone is displayed Bring the cellular phone near the in-vehicle device and check if it is reconnected -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed Turn the cellular phone connection conformation display on the in-vehicle device off -
Phonebook data cannot be transferred Check that the phonebook automatic transfer setting of the in-vehicle device is on -
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required) -
Check that no applications on the cellular phone are running -
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation -
Transfer phonebook data manually -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Phonebook data is cleared Radio and display receiver assembly Click here
Phonebook data cannot be edited Check that the phonebook data automatic transfer setting is off -
Radio and display receiver assembly Click here
All the transferred phonebook data is sorted to "Other" Check that no applications on the cellular phone are operating -
Check that phonebook data in the cellular phone is not stored to the SIM card -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Cellular phone cannot make outgoing/ incoming calls Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again -
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth" -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Other caller's voice is interrupted by noise or sound quality is poor Check the receiving voice volume (if it is too high, voice may sound distorted) -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Other caller's voice cannot be heard Check that reception voice volume is not set to minimum -
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Caller's voice (your voice) is interrupted by noise or sound quality is poor Check the transmitting voice volume (if it is too high, voice may sound distorted) -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Other caller cannot hear your voice When talking on the cellular phone, check that the mute button is not pressed -
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence) -
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check Click here
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
No notification when a new SMS/MMS/e-mail has been received Check the SMS/MMS/e-mail notification settings on the cellular phone and the Radio and display receiver assembly -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
Received SMS/MMS/e-mail cannot be read Check the SMS/MMS/e-mail transfer settings on the cellular phone and the Radio and display receiver assembly -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here
SMS/MMS/e-mail cannot be replied to Move the vehicle into a cellular phone service area, and check the operation of the Radio and display receiver assembly and cellular phone -
Check that the cellular phone can send an SMS/MMS/e-mail -
Proceed to "Cellular Phone Inspection" Click here
Radio and display receiver assembly Click here

"Bluetooth" Audio Function
Symptom Suspected Area Link
Portable player cannot be registered Proceed to "Portable Player cannot be Registered" Click here
Radio and display receiver assembly Click here
Portable player cannot be connected manually/automatically Proceed to "Portable Player cannot be Registered" Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically" Click here
Radio and display receiver assembly Click here
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth" Proceed to "Portable Player cannot be Registered" Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically" Click here
Radio and display receiver assembly Click here
Sound of portable player cannot be heard from speakers, or sound is low Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low" Click here
Radio and display receiver assembly Click here
Portable player does not play even after "Bluetooth" audio mode is selected Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" Click here
Radio and display receiver assembly Click here
Portable player does not play Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" Click here
Radio and display receiver assembly Click here
Track information such as track number, track name, elapsed play time and playlist is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Battery condition of portable player is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
"Bluetooth" signal condition is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" Click here
Radio and display receiver assembly Click here
Noise occurs or sound skips when portable player plays Proceed to "Noise Occurs or Sound Skips when Portable Player Plays" Click here
Radio and display receiver assembly Click here
Registered device cannot be deleted Proceed to "Registered Device cannot be Deleted" Click here
Radio and display receiver assembly Click here

USB Audio System Function
Symptom Suspected Area Link
USB audio system sound cannot be heard or sound quality is bad (USB connector is used) Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
USB device or "iPod" is not recognized Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
Track information such as track, artist and album names, is not displayed Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
USB device or "iPod" is recognized but cannot play, or can play but not in a sorted order Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
"iPod" battery cannot be charged Proceed to "USB Audio System Recognition/Play Error" Click here
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here
Album cover art cannot be displayed Check that Display Cover Art on the "Cover Art" Settings screen is set to on -
Check if similar symptoms occur with another vehicle -
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio and display receiver assembly, update the Gracenote database to the latest version -
Radio and display receiver assembly Click here
User set album cover art cannot be displayed Check if the priority display of Gracenote database album cover art setting is off -
Check that a JPEG file is used for the album cover art registered to the music data in the USB device or "iPod" - Radio and display receiver assembly -
Radio and display receiver assembly Click here
Screen is distorted or not displayed only when using the video function of an "iPod Check if "iPod" is set to output images -
Proceed to "USB Audio System Outline" in System Description and check if the "iPod" is compatible with the radio and display receiver assembly Click here
Check if the appropriate image signal setting (NTSC/ PAL) is selected -
Check if video sound input is set to "A/V" -
Connect using a known good cable and check if the image is output -
No. 1 stereo jack adapter assembly Click here
Radio and display receiver assembly Click here

Fuel Consumption Function
Symptom Suspected Area Link
Graph is not displayed on "Trip Information" screen Recheck with the engine control system operating -
Radio and display receiver assembly Click here
Cruise range is not displayed on "Trip Information" screen Engine start and recheck -
Radio and display receiver assembly Click here
Graph is not updated on "Past record" screen even though "Clear" is selected Engine start and recheck -
Radio and display receiver assembly Click here
Graph is not displayed on "Past record" screen Engine start and recheck -
Radio and display receiver assembly Click here