Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | Link |
|---|---|---|
| Map light assembly does not illuminate. | Map light bulb |
|
| Map light assembly |
|
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| No. 1 room light assembly does not illuminate. | No. 1 room light bulb |
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| Vanity light assembly does not illuminate. | Vanity light bulb | - |
| Visor assembly |
|
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| No instrument panel illumination lights come on (taillights operate normally). | PANEL fuse | - |
| Harness or connector | - |