Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
88625
1.INSTALL NO. 1 COOLER THERMISTOR
Use the same procedure for the RH side and LH side.
Install the No. 1 cooler thermistor in the air conditioning unit assembly.
Connect the connector.
55305C
2.INSTALL INSTRUMENT PANEL REINFORCEMENT SUB-ASSEMBLY
45250
3.INSTALL STEERING COLUMN ASSEMBLY
83108
4.INSTALL METER MIRROR SUB-ASSEMBLY
55468C
5.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL SEAL
6.INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)
7.INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)
87211
8.INSTALL NO. 1 AIR DUCT
87211A
9.INSTALL NO. 2 AIR DUCT
73990
10.INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
73900
11.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)
53681
12.INSTALL UPPER CENTER FRONT SUSPENSION BRACE
13.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY