Tightening Torque Specifications
Precautions: General safety (00)
NOTE:
For fastener(s) with * (asterisk) below, refer to the specified procedure in “Repair Instructions”.
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Engine oil drain plug | 20 | 2.0 | 15.0 |
 |
| Oil filter cover | 30 | 3.1 | 22.5 |
|
| Oil pressure switch-1 | 26 | 2.7 | 19.5 |
|
| Oil pressure switch-2 | 20 | 2.0 | 15.0 |
|
| Heat exchanger No.1 bolt | 45 | 4.6 | 33.5 |
|
| Oil pan bolt (M6)* | 9.0 | 0.92 | 7.0 |
|
| Oil pan bolt (M8)* | 25 | 2.5 | 18.5 |
|
| Oil pump bolt | 9.0 | 0.92 | 7.0 |
|
| Crankshaft timing belt pulley bolt | 340 | 34.7 | 251.0 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: