Home › Vehicle Interior › INTERIOR › SIDE PANEL (for RHD) › from 2019.08
RM2850E _58 Vehicle Interior _073215 INTERIOR _0356398 SIDE PANEL(for RHD) A

INTERIOR  SIDE PANEL(for RHD)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 89910 3.REMOVE COOLER BOX ASSEMBLY (w/ Cooler Box)

Hide 4.REMOVE FRONT PROTECTOR ASSEMBLY RH (w/ Protector)

a.

Remove the 6 bolts and front protector assembly RH.

B470875


Hide 62212 5.REMOVE FRONT PILLAR GARNISH LH

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL


Hide 62989 6.REMOVE CENTER DOOR LOCK COVER (for Folding Type)

a.
B467076

Detach the 8 clips and remove the center door lock cover.


Hide 62425 7.REMOVE CENTER PILLAR GARNISH COVER (w/ Hand Grip Frame)

Hide 74730 8.REMOVE HAND GRIP FRAME ASSEMBLY (w/ Hand Grip Frame)

Hide 62638A 9.REMOVE QUARTER PILLAR GARNISH RH

a.
B467074

for Folding Type:

Detach the 2 claws and 6 clips and remove the quarter pillar garnish RH.


b.
B467077

for Glide Type:

Detach the claw and 6 clips and remove the quarter pillar garnish RH.


Hide 73224 10.REMOVE FRONT SEAT BELT RETRACTOR COVER LH (w/ Rear No. 1 Seat)

Hide 73220 11.DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH (w/ Rear No. 1 Seat)


b.
B464720

Remove the bolt.


c.

Detach the guide and disconnect the front seat outer belt anchor.


d.
B464721

Using a moulding remover D, detach the 2 claws and open the front seat outer belt shoulder anchor cover.


e.
B464723

Loosen the bolt and disconnect the shoulder anchor of the front seat outer belt assembly LH.


Hide 62547B 12.REMOVE NO. 3 PILLAR GARNISH LH

Hide 67676 13.REMOVE FRONT SIDE TRIM BOARD COVER LH

a.
B465978

Remove the screw.


b.

Detach the 3 clips and 4 claws and remove the front side trim board cover LH.


Hide 62540A 14.REMOVE NO. 2 SIDE TRIM ASSEMBLY LH

a.
B465979

Detach the 9 clips and remove the No. 2 side trim assembly LH.


Hide 62520G 15.REMOVE NO. 1 SIDE TRIM ASSEMBLY LH

a.
B467072

Detach the 13 clips.


b.

Detach the 2 guides and remove the No. 1 side trim assembly LH.


Hide 62515B 16.REMOVE NO. 1 SIDE TRIM BASE COVER RH (except Super Long Body)

a.
B465974

except Type B:

Detach the 4 claws and clip and remove the No. 1 side trim base cover RH.


b.
B470895

for Type B:

Detach the 2 claws and clip and remove the No. 1 side trim base cover RH.


Hide 62627D 17.REMOVE SIDE TRIM COVER RH (except Super Long Body, for Type B)

a.
B470896N02
1.521,1.042 1.781,1.24 0.26,0.198 10 false (1) 2.281,1.229 2.542,1.427 0.26,0.198 10 false (2)

Detach the 3 claws and remove the side trim cover RH in the direction indicated by the arrows in the illustration.


Hide 62516B 18.REMOVE NO. 2 SIDE TRIM BASE COVER RH (except Super Long Body)

a.
B465975

Detach the clip and 5 claws and remove the No. 2 side trim base cover RH.


Hide 62516D 19.REMOVE NO. 3 SIDE TRIM BASE COVER RH (except Super Long Body, w/ No. 3 Side Trim Base Cover RH)

HINT:

Use the same procedure described for the No. 2 side trim base cover RH.


Hide 62516E 20.REMOVE NO. 4 SIDE TRIM BASE COVER RH (except Super Long Body, w/ No. 4 Side Trim Base Cover RH)

a.

except Type B:

HINT:

Use the same procedure described for the No. 2 side trim base cover RH.



b.
B470897

for Type B:

Detach the 3 claws and clip and remove the No. 4 side trim base cover RH.


Hide 62516F 21.REMOVE NO. 5 SIDE TRIM BASE COVER RH (except Super Long Body, w/ No. 5 Side Trim Base Cover RH)

a.

except Type B:

HINT:

Use the same procedure described for the No. 2 side trim base cover RH.



b.

for Type B:

i.
B470893

Detach the 2 claws.


ii.
B470894N02
0.729,0.583 0.948,0.781 0.219,0.198 10 false (2) 2.24,0.813 2.49,1.021 0.25,0.208 10 false (1)

Remove the No. 5 side trim base cover RH in the direction indicated by the arrows in the illustration.



Hide 62516G 22.REMOVE NO. 6 SIDE TRIM BASE COVER RH (for Long Body, w/ No. 6 Side Trim Base Cover RH)

HINT:

Use the same procedure described for the No. 2 side trim base cover RH.


Hide 62671F 23.REMOVE NO. 1 SIDE TRIM BOARD COVER RH (except Super Long Body)

a.
B465976

Detach the clip and 5 claws and remove the No. 1 side trim board cover RH.


Hide 62525D 24.REMOVE NO. 1 SIDE TRIM BASE COVER LH (except Super Long Body)

HINT:

Use the same procedure described for the No. 1 side trim base cover RH.


Hide 62526D 25.REMOVE NO. 2 SIDE TRIM BASE COVER LH (except Super Long Body)

HINT:

Use the same procedure described for the No. 2 side trim base cover RH.


Hide 62526F 26.REMOVE NO. 3 SIDE TRIM BASE COVER LH (except Super Long Body, w/ No. 3 Side Trim Base Cover LH)

a.

except Type B:

HINT:

Use the same procedure described for the No. 2 side trim base cover RH.



b.

for Type B:

HINT:

Use the same procedure described for the No. 4 side trim base cover RH.



Hide 62526G 27.REMOVE NO. 4 SIDE TRIM BASE COVER LH (except Super Long Body, w/ No. 4 Side Trim Base Cover LH)

a.

except Type B:

HINT:

Use the same procedure described for the No. 2 side trim base cover RH.



b.

for Type B:

HINT:

Use the same procedure described for the No. 5 side trim base cover RH.



Hide 62672 28.REMOVE NO. 1 SIDE TRIM BOARD COVER LH (except Super Long Body)

HINT:

Use the same procedure described for the No. 1 side trim board cover RH.


Hide 29.REMOVE REAR SEAT ASSEMBLY RH

Hide 30.REMOVE REAR SEAT ASSEMBLY LH

a.

b.

Hide 31.REMOVE REAR NO. 8 SEAT ASSEMBLY (for 4-Passenger Seat)

Hide 62425 32.REMOVE CENTER PILLAR GARNISH COVER

Hide 74730 33.REMOVE HAND GRIP FRAME ASSEMBLY (for Folding Type)

a.
B467141

Remove the 7 bolts and hand grip frame assembly.


Hide 74708 34.REMOVE NO. 2 HAND GRIP FRAME SUB-ASSEMBLY (for Glide Type)

a.
B467059

for Type A:

Remove the 8 bolts and No. 2 hand grip frame sub-assembly.


b.
B470874

for Type B:

Remove the 7 bolts and No. 2 hand grip frame sub-assembly.


Hide 62639A 35.REMOVE QUARTER PILLAR GARNISH LH

a.
B467075

for Folding Type:

Detach the 2 claws and 6 clips and remove the quarter pillar garnish LH.


b.
B467078

for Glide Type:

Detach the 3 claws and 6 clips and remove the quarter pillar garnish LH.


Hide 62622C 36.REMOVE NO. 2 SIDE TRIM BOARD LH

a.
B467090

for Standard Body:

i.

Remove the 2 clips.


ii.

Detach the 2 clips and remove the No. 2 side trim board LH.



b.
B467614

except Standard Body:

i.

Remove the 5 clips.


ii.

Detach the 6 clips and remove the No. 2 side trim board LH.



Hide 62623C 37.REMOVE NO. 3 SIDE TRIM BOARD LH

a.

except Super Long Body:

i.
B467091

Remove the 4 clips.


ii.

Detach the 6 clips and remove the No. 3 side trim board LH.



b.

for Super Long Body:

i.
B554302

Remove the 6 clips.


ii.

Detach the 9 clips and remove the No. 3 side trim board LH.



Hide 61890A 38.REMOVE BACK WINDOW GLASS HAMMER ASSEMBLY (w/ Hammer)

Hide 62548B 39.REMOVE NO. 4 PILLAR GARNISH LH

a.
B467049

Detach the 4 claws and 4 clips and remove the No. 4 pillar garnish LH.


Hide 62540A 40.REMOVE NO. 2 SIDE TRIM ASSEMBLY LH

a.
B467050

Remove the 4 clips.


b.

Detach the 7 clips and remove the No. 2 side trim assembly LH.


Hide 62549B 41.REMOVE NO. 5 PILLAR GARNISH LH (except Standard Body)

a.
B467049

Detach the 4 claws and 4 clips and remove the No. 5 pillar garnish LH.


Hide 58614A 42.REMOVE NO. 4 MAT SET PLATE

a.
B465981

Remove the 5 screws and No. 4 mat set plate.


Hide 64735A 43.REMOVE CENTER BACK INNER RAIL GARNISH (for Lift Up Type)

Hide 62487A 44.REMOVE INNER ROOF SIDE GARNISH COVER RH (for Double Swing Out Type)

Hide 62488A 45.REMOVE INNER ROOF SIDE GARNISH COVER LH (for Double Swing Out Type)

HINT:

Use the same procedure described for the RH side.


Hide 62471D 46.REMOVE REAR UPPER PILLAR GARNISH RH

Hide 62472D 47.REMOVE REAR UPPER PILLAR GARNISH LH

HINT:

Use the same procedure described for the RH side.


Hide 62227 48.REMOVE QUARTER PILLAR COVER RH

a.
B467082

Detach the 5 claws and remove the quarter pillar cover RH.


Hide 62228 49.REMOVE LOWER QUARTER PILLAR COVER LH

a.
B467083

Detach the 4 claws and remove the lower quarter pillar cover LH.


Hide 62511R 50.REMOVE REAR BODY REAR INSIDE TRIM RH

a.

for Double Swing Out Type:

i.
B471423

Remove the 3 clips.


ii.

Detach the 4 clips and remove the rear body rear inside trim RH.



b.

for Lift Up Type:

i.
B467085

for Type A:

1.

Remove the 3 clips.

2.

Detach the 4 clips and remove the rear body rear inside trim RH.



ii.
B470871

for Type B:

1.

Remove the 3 clips.

2.

Detach the 3 clips and remove the rear body rear inside trim RH.




Hide 62512R 51.REMOVE REAR BODY REAR INSIDE TRIM LH

a.

for Double Swing Out Type:

i.
B471424

Remove the 3 clips.


ii.

Detach the 4 clips and remove the rear body rear inside trim LH.



b.

for Lift Up Type:

i.
B467084

for Type A:

1.

Remove the 3 clips.

2.

Detach the 4 clips and remove the rear body rear inside trim LH.



ii.
B470870

for Type B:

1.

Remove the 3 clips.

2.

Detach the 3 clips and remove the rear body rear inside trim LH.




Hide 62624C 52.REMOVE NO. 4 SIDE TRIM BOARD LH

a.
B467092

for Standard Body:

Detach the 4 clips and remove the No. 4 side trim board LH.


b.
B465952

for Long Body:

Detach the 4 clips and remove the No. 4 side trim board LH.


c.
B554303

for Super Long Body:

Detach the 4 clips and remove the No. 4 side trim board LH.


Hide 62625C 53.REMOVE NO. 5 SIDE TRIM BOARD LH

a.

except Super Long Body:

i.
B465953

Remove the 6 clips.


ii.

Detach the 6 clips and remove the No. 5 side trim board LH.



b.

for Super Long Body:

i.
B554304

Remove the 7 clips.


ii.

Detach the 7 clips and remove the No. 5 side trim board LH.



Hide 62560B 54.REMOVE NO. 3 SIDE TRIM ASSEMBLY LH

a.
B467057

Remove the 4 clips.


b.

Detach the 7 clips and remove the No. 3 side trim assembly LH.


Hide 62570C 55.REMOVE NO. 4 SIDE TRIM ASSEMBLY

a.

for Long Body:

i.
B467052

Remove the 3 clips.


ii.

Detach the 3 clips and remove the No. 4 side trim assembly.



b.

for Super Long Body:

i.
B554305

Remove the 4 clips.


ii.

Detach the 7 clips and remove the No. 4 side trim assembly.



Hide 63375D 56.REMOVE ROOF HEADLINING MOULDING (w/o Rear Air Duct)

HINT:

Use the same procedure described for the RH side.

Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL


Hide 63378C 57.REMOVE NO. 3 ROOF HEADLINING MOULDING (w/o Rear Air Duct)

HINT:

Use the same procedure to remove the No. 2 roof headlining moulding.

Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL


Hide 62452B 58.REMOVE NO. 3 ROOF SIDE RAIL GARNISH LH (w/o Rear Air Duct)

a.
B470898

Detach the 6 clips and 2 claws and remove the No. 3 roof side rail garnish LH.


Hide 62451E 59.REMOVE REAR ROOF SIDE RAIL GARNISH (w/o Rear Air Duct)

a.
B470899

Detach the 7 clips and 2 claws and remove the rear roof side rail garnish.


Hide 62452C 60.REMOVE REAR ROOF SIDE RAIL GARNISH LH (w/o Rear Air Duct)

a.
B470900

Detach the 7 clips and remove the rear roof side rail garnish LH.


Hide 61.REMOVE FRONT SEAT ASSEMBLY

Hide 46243 62.REMOVE PARKING BRAKE LEVER COVER

Hide 58651A 63.REMOVE FRONT DOOR NO. 1 MAT PLATE

Hide 62311C 64.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

Hide 73233 65.REMOVE OUTER LAP BELT ANCHOR COVER

Hide 73210 66.DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

Hide 62413A 67.REMOVE LOWER CENTER PILLAR GARNISH RH

Hide 63951 68.REMOVE COOLER PIPE COVER

Hide 62537B 69.REMOVE NO. 3 PILLAR GARNISH RH

a.
B467049

Detach the 4 claws and 4 clips and remove the No. 3 pillar garnish RH.


Hide 62538B 70.REMOVE NO. 4 PILLAR GARNISH RH

a.
B467049

Detach the 4 claws and 4 clips and remove the No. 4 pillar garnish RH.


Hide 62539B 71.REMOVE NO. 5 PILLAR GARNISH RH (except Standard Body)

a.
B467049

Detach the 4 claws and 4 clips and remove the No. 5 pillar garnish RH.


Hide 62615C 72.REMOVE NO. 5 SIDE TRIM BOARD RH

a.

except Super Long Body:

i.
B465951

Remove the 6 clips.


ii.

Detach the 6 clips and remove the No. 5 side trim board RH.



b.

for Super Long Body:

i.
B554306

Remove the 7 clips.


ii.

Detach the 7 clips and remove the No. 5 side trim board RH.



Hide 62614C 73.REMOVE NO. 4 SIDE TRIM BOARD RH

a.
B467098

Remove the 2 clips.


b.

Detach the 4 clips and remove the No. 4 side trim board RH.


Hide 62613C 74.REMOVE NO. 3 SIDE TRIM BOARD RH

a.

except Super Long Body:

i.
B467096

Remove the 4 clips.


ii.

Detach the 6 clips and remove the No. 3 side trim board RH.



b.

for Super Long Body:

i.
B554308

Remove the 6 clips.


ii.

Detach the 9 clips and remove the No. 3 side trim board RH.



Hide 62612C 75.REMOVE NO. 2 SIDE TRIM BOARD RH

a.

for Standard Body:

i.
B467095

Remove the 3 clips.


ii.

Detach the 3 clips and remove the No. 2 side trim board RH.



b.

except Standard Body:

i.
B467615

Remove the 6 clips.


ii.

Detach the 7 clips and remove the No. 2 side trim board RH.



Hide 62611C 76.REMOVE NO. 1 SIDE TRIM BOARD RH

a.
B467094

Remove the 6 clips.


b.

Detach the 6 clips and remove the No. 1 side trim board RH.


Hide 62570C 77.REMOVE NO. 4 SIDE TRIM ASSEMBLY

a.

for Long Body:

i.
B467053

Remove the 3 clips.


ii.

Detach the 3 clips and remove the No. 4 side trim assembly.



b.

for Super Long Body:

i.
B554309

Remove the 4 clips.


ii.

Detach the 7 clips and remove the No. 4 side trim assembly.



Hide 62550E 78.REMOVE NO. 3 SIDE TRIM ASSEMBLY RH

a.
B467058

Remove the 4 clips.


b.

Detach the 7 clips and remove the No. 3 side trim assembly RH.


Hide 62530A 79.REMOVE NO. 2 SIDE TRIM ASSEMBLY RH

a.
B467055

Remove the 4 clips.


b.

Detach the 7 clips and remove the No. 2 side trim assembly RH.


Hide 62510G 80.REMOVE NO. 1 SIDE TRIM ASSEMBLY RH

a.
B467056

Remove the 4 clips.


b.

Detach the 7 clips and remove the No. 1 side trim assembly RH.


Hide 63375B 81.REMOVE NO. 1 ROOF HEADLINING MOULDING RH (w/o Rear Air Duct)

Hide 63377C 82.REMOVE NO. 2 ROOF HEADLINING MOULDING (w/o Rear Air Duct)

Hide 62451B 83.REMOVE NO. 3 ROOF SIDE RAIL GARNISH RH (w/o Rear Air Duct)

a.
B470901

Detach the 7 clips and 2 claws and remove the No. 3 roof side rail garnish RH.


Hide 62451E 84.REMOVE REAR ROOF SIDE RAIL GARNISH (w/o Rear Air Duct)

a.
B470902

Detach the 7 clips and 2 claws and remove the rear roof side rail garnish.


Hide 62451C 85.REMOVE REAR ROOF SIDE RAIL GARNISH RH (w/o Rear Air Duct)

a.
B470903

Detach the 6 clips and remove the rear roof side rail garnish RH.