| U0104
|
Lost Communication with Driving Support ECU
|
·
Driving support ECU assembly branch line or connector
·
Power source circuit of driving support ECU assembly
·
Driving support ECU assembly ground circuit
·
Driving support ECU assembly
|
- HINT:
-
Network gateway ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 2.
|
|
| U0199
|
Lost Communication with "Door Control Module A"
|
·
Outer mirror control ECU assembly branch line or connector
·
Power source circuit of outer mirror control ECU assembly
·
Outer mirror control ECU assembly ground circuit
·
Outer mirror control ECU assembly
|
- HINT:
-
Main body ECU (multiplex network body ECU) stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 1.
|
|
| U0200
|
Lost Communication with "Door Control Module B"
|
·
Outer mirror control ECU assembly branch line or connector
·
Power source circuit of outer mirror control ECU assembly
·
Outer mirror control ECU assembly ground circuit
·
Outer mirror control ECU assembly
|
- HINT:
-
Main body ECU (multiplex network body ECU) stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 1.
|
|
| U0208
|
Lost Communication with "Seat Control Module A"
|
·
Position control ECU and switch assembly branch line or connector
·
Power source circuit of position control ECU and switch assembly
·
Position control ECU and switch assembly ground circuit
·
Position control ECU and switch assembly
|
- HINT:
-
Main body ECU (multiplex network body ECU) stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 1.
|
|
| U0230
|
Lost Communication with Rear Gate Module
|
·
Multiplex network door ECU main line or connector
·
Power source circuit of multiplex network door ECU
·
Multiplex network door ECU ground circuit
·
Multiplex network door ECU
|
- HINT:
-
Main body ECU (multiplex network body ECU) stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 1.
|
|
| U0233
|
Lost Communication with Blind Spot Monitor Master Module
|
·
Blind spot monitor sensor LH branch line or connector
·
Power source circuit of blind spot monitor sensor LH
·
Blind spot monitor sensor LH ground circuit
·
Blind spot monitor sensor LH
|
- HINT:
-
Network gateway ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 2.
|
|
| U0235
|
Lost Communication with Cruise Control Front Distance Range Sensor
|
·
Open or short in sub bus 13 main line or connector
·
Millimeter wave radar sensor assembly
·
Power source circuit of millimeter wave radar sensor assembly
·
Millimeter wave radar sensor assembly ground circuit
|
- HINT:
-
The driving support ECU assembly stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 13.
|
|
| U023A
|
Lost Communication with Front Camera Module
|
·
Lane departure warning camera branch line or connector
·
Power source circuit of lane departure warning camera
·
Lane departure warning camera ground circuit
·
Lane departure warning camera
|
- HINT:
-
Network gateway ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 2.
|
|
| U0265
|
Lost Communication with Parking Assist Monitor Module
|
·
Television camera assembly branch line or connector
·
Power source circuit of television camera assembly
·
Television camera assembly ground circuit
·
Television camera assembly
|
- HINT:
-
Network gateway ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 2.
|
|
| U1002
|
Lost Communication with Gateway Module (Network Gateway ECU)
|
·
Open or short in sub bus 2 main line or connector
·
Open or short in sub bus 2 branch line or connector
·
Driving support ECU assembly
(w/ Pre-crash safety system)
·
Lane departure warning camera
(w/ Lane departure alert system)
·
Television camera assembly
(w/ Parking assist monitor system)
·
Blind spot monitor sensor LH
(w/ Blind spot monitor system)
·
Open or short in No. 1 CAN junction connector
·
Open or short in No. 2 CAN junction connector
·
Open or short in CAN junction terminal
|
- HINT:
-
The network gateway ECU stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 2.
|
|
| U1002
|
Lost Communication with Gateway Module (Main Body ECU)
|
·
Open or short in sub bus 1 main line or connector
·
Open or short in sub bus 1 branch line or connector
·
Main body ECU (multiplex network body ECU)
·
Outer mirror control ECU assembly (for driver side)
(w/ Seat position memory system)
·
Outer mirror control ECU assembly (for front passenger side)
(w/ Seat position memory system)
·
Position control ECU and switch assembly
(w/ Seat position memory system)
·
Multiplex network door ECU
(w/ Power back door system)
·
Open or short in No. 5 CAN junction connector
·
Open or short in No. 6 CAN junction connector
|
- HINT:
-
The main body ECU (multiplex network body ECU) stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 1.
|
|
| U1002
|
Lost Communication with Gateway Module (Sensor Bus)
|
·
Open or short in sub bus 13 main line or connector
·
Driving support ECU assembly
·
Power source circuit of driving support ECU assembly
·
Driving support ECU assembly ground circuit
·
Millimeter wave radar sensor assembly
·
Power source circuit of millimeter wave radar sensor assembly
·
Millimeter wave radar sensor assembly ground circuit
|
- HINT:
-
The driving support ECU assembly stores DTCs when it detects a communication stop or network communication error for ECUs connected to sub bus 13.
|
|