| Front wipers do not operate at all
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Proceed to "Front Wiper Motor Circuit"
|
|
| Main body ECU (Multiplex network body ECU)
|
|
| Windshield wiper relay assembly
|
|
| Front wipers do not operate in AUTO
|
Check customize parameters (Auto wiper)
|
|
| Rain sensor tape (Check for air bubbles)
|
-
|
| Proceed to "Wiper and Washer Switch Circuit"
|
|
| Rain sensor
|
|
| Front wipers do not operate in LO
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Proceed to "Front Wiper Motor Circuit"
|
|
| Windshield wiper relay assembly
|
|
| Front wipers do not operate in HI
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Proceed to "Front Wiper Motor Circuit"
|
|
| Windshield wiper relay assembly
|
|
| Front wipers do not operate in INT*
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers do not operate in MIST
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Windshield wiper relay assembly
|
|
| When the front wipers are operating in AUTO, the rain sensor sensitivity cannot be adjusted by the auto sensitivity adjustment switch (wiping interval does not change)
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| When the front wipers are operating in AUTO, the wiper interval does not change according to changes in the vehicle speed
|
Rain sensor
|
|
| Main body ECU (Multiplex network body ECU)
|
|
| When the front wipers are operating in INT, the front wiper intermittent operation interval cannot be adjusted by the auto sensitivity adjustment switch (wiping interval does not change)*
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| When the front wipers are operating in INT, the front wiper intermittent operation interval does not change according to changes in the vehicle speed*
|
Main body ECU (Multiplex network body ECU)
|
|
| Front wipers continuously operate in AUTO
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers continuously operate in LO
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers continuously operate in HI
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| Front wipers continuously operate in INT*
|
Proceed to "Wiper and Washer Switch Circuit"
|
|
| When the front wipers are operating in AUTO, they do not stop operating when the driver door or front passenger door is opened
|
Proceed to "Front Door Courtesy Switch Circuit"
|
|
| Main body ECU (Multiplex network body ECU)
|
|
| When the customize setting "Auto Wiper" is changed, the operation of the wiper system does not change
|
Rain sensor
|
|
| When the front wiper switch is turned off, the front wipers stop in the wrong position
|
Proceed to "Front Wiper Motor Circuit"
|
|
| Check the automatic stop (park) position
|
|
| Windshield wiper relay assembly
|
|