Home › Engine / Hybrid System › 2TR-FE (ENGINE MECHANICAL) › ENGINE UNIT
RM27T0E _51 Engine / Hybrid System _053663 2TR-FE ENGINE MECHANICAL _0260500 ENGINE UNIT A

2TR-FE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 17167 3.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 22030 7.REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY

Hide 23250 8.REMOVE FUEL DELIVERY PIPE WITH FUEL INJECTOR

Hide 11.REMOVE HEATER HOSE

a.
A335483E01
0.202,0.21 0.424,0.373 0.222,0.163 10 *A 0.202,2.311 0.424,2.474 0.222,0.163 10 *B

Slide the 2 clips and remove the 2 heater hoses from the No. 1 water by-pass pipe and No. 2 water by-pass pipe.

Text in Illustration
*A for Single Air Conditioning System
*B for Dual Air Conditioning System


Hide 88545 13.REMOVE IDLE PULLEY ASSEMBLY

a.
A329590

Loosen the bolt, and then remove the idle pulley assembly.

HINT:

The bolt in the illustration cannot be removed from the idle pulley assembly.



Hide 88431 14.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET

a.
A099203

Remove the 5 bolts and No. 1 compressor mounting bracket.


Hide 16603 15.REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY

Hide 16268 16.REMOVE NO. 1 WATER BY-PASS PIPE

Hide 11452 17.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Remove the engine oil level dipstick.


b.
A222417

Remove the bolt and engine oil level dipstick guide.


Hide 12361 18.REMOVE FRONT ENGINE MOUNTING INSULATOR

a.
A354936E01
0.035,0 0.222,0.170 0.187,0.170 10 *a 1.835,0 2.022,0.170 0.187,0.170 10 *b

Remove the 2 nuts and 2 front engine mounting insulators.

Text in Illustration
*a LH Side
*b RH Side


Hide 12315 19.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

a.
A222415

Remove the 4 bolts and front No. 1 engine mounting bracket LH.


Hide 12311 20.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

a.
A222416

Remove the 4 bolts and front No. 1 engine mounting bracket RH.