Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
55401E
1.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
for LHD:
Attach the 2 guides to install the instrument panel safety pad sub-assembly.
Install the 2 brackets with the 4 bolts and 2 nuts.
Connect the connectors and attach the clamps and claws.
Install the 2 passenger airbag bolts <G>.
Install the 6 bolts <E> and nut <F>.
Install the front floor carpet.
| *1 | Bolt <E> | *2 | Nut <F> |
| *3 | Bolt <G> | *4 | Guide |
| *5 | Bracket | - | - |
for RHD:
Attach the 2 guides to install the instrument panel safety pad sub-assembly.
Install the 2 brackets with the 4 bolts and 2 nuts.
Connect the connectors and attach the clamps and claws.
Install the 2 passenger airbag bolts <G>.
Install the 6 bolts <E> and nut <F>.
Install the front floor carpet.
| *1 | Bolt <E> | *2 | Nut <F> |
| *3 | Bolt <G> | *4 | Guide |
| *5 | Bracket | - | - |
86160P
2.INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
55408F
3.INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
Attach the 2 clips, claw and 2 guides to install the No. 1 instrument panel speaker panel.
55409F
4.INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
Use the same procedure described for the No. 1 instrument panel speaker panel.
55650
5.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
Attach the 4 clips to install the No. 1 instrument panel register.
55660
6.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
Use the same procedure described for the No. 1 instrument panel register.
86160L
7.INSTALL FRONT NO. 4 SPEAKER ASSEMBLY
55421B
8.INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL
Attach the 8 clips and 2 guides to install the upper instrument cluster finish panel.
55406B
9.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o CRAWL)
Attach the 3 clips and guide to install the lower center instrument cluster finish panel.
Install the 2 bolts <E>.
55936E
10.INSTALL CENTER CLUSTER MODULE SWITCH (w/ CRAWL)
55522B
11.INSTALL RADIO TUNER OPENING COVER (w/o Audio)
Install the radio tuner opening cover with the 4 bolts.
86120
12.INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)
86431
13.INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY (w/ Navigation System)
55420A
14.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Navigation System)
Connect each connector.
Attach the 10 clips to install the center instrument cluster finish panel.
89533
15.INSTALL 4 WHEEL DRIVE CONTROL ECU
859A1
16.INSTALL DRIVING SUPPORT SWITCH CONTROL ECU
86741A
17.INSTALL TELEMATICS TRANSCEIVER (w/ Telematics Transceiver)
85970A
18.INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY (w/ Telematics Transceiver, Double Door Lock)
55550
19.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
| *1 | Bolt |
| *2 | Screw |
Connect each connector.
Attach the 5 clips and claw to install the glove compartment door.
Install the 2 bolts <C> and 2 screws <A> or <B>.
55461A
20.INSTALL INSTRUMENT PANEL ORNAMENT
Attach the 5 clips to install the instrument panel ornament.
55317A
21.INSTALL INSTRUMENT SIDE PANEL RH
Connect the connector.
Attach the 5 clips, claw and 3 guides to install the instrument side panel.
83100
22.INSTALL COMBINATION METER ASSEMBLY
55404D
23.INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Attach the 4 claws, 2 clips and 2 guides to install the instrument cluster finish panel.
73900
24.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)
55045
25.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Connect each connector and each cable.
w/o Knee Airbag:
Attach the 7 clips to install the lower instrument panel finish panel.
w/ Knee Airbag:
Attach the 14 clips to install the lower instrument panel finish panel.
Install the 2 bolts <C>.
Attach the 2 claws to close the cover.
55480D
26.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Connect each connector.
Attach the 4 clips to install the instrument panel finish panel.
55476C
27.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)
Connect each connector.
Attach the 4 clips to install the instrument panel finish plate garnish.
55471A
28.INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)
Attach the 3 clips to install the instrument cluster finish panel ornament.
55318C
29.INSTALL INSTRUMENT SIDE PANEL LH
Attach the 5 clips, claw and 3 guides to install the instrument side panel.
86160J
30.INSTALL FRONT NO. 3 SPEAKER ASSEMBLY
62212
31.INSTALL FRONT PILLAR GARNISH LH
62211
32.INSTALL FRONT PILLAR GARNISH RH
Use the same procedure described for the LH side.
74611F
33.INSTALL NO. 1 ASSIST GRIP
74616C
34.INSTALL FRONT NO. 1 ASSIST GRIP PLUG LH
74615E
35.INSTALL FRONT NO. 1 ASSIST GRIP PLUG RH
Use the same procedure described for the LH side.
62312B
36.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62311B
37.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
62112
38.INSTALL COWL SIDE TRIM BOARD LH
62111C
39.INSTALL COWL SIDE TRIM BOARD RH
Use the same procedure described for the LH side.
67920
40.INSTALL DOOR SCUFF PLATE ASSEMBLY LH
67910
41.INSTALL DOOR SCUFF PLATE ASSEMBLY RH
Use the same procedure described for the LH side.
58910C
42.INSTALL REAR CONSOLE BOX ASSEMBLY
for Automatic Transmission:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION
for Manual Transmission:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION
w/ Refrigerated Cool Box:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>INSTALLATION
for Bench Seat Type:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Bench Seat Type)>INSTALLATION
58191
43.INSTALL FRONT FLOOR FOOTREST
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT FLOOR FOOTREST>INSTALLATION
for RHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT FLOOR FOOTREST>INSTALLATION
44.INSTALL FRONT SEAT ASSEMBLY LH
for Manual Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION
for Power Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>INSTALLATION
45.INSTALL FRONT SEAT ASSEMBLY RH
for Manual Seat:
Use the same procedure described for the LH side.
for Power Seat:
Use the same procedure described for the LH side.
for Walk in Seat Type:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Walk in Seat Type)>INSTALLATION
84140
46.INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY
47.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter.
Click hereSteering>STEERING COLUMN>POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM>CUSTOMIZE PARAMETERS
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
48.CHECK SRS WARNING LIGHT