Home › Drivetrain › JF2A (TRANSFER / 4WD / AWD) › TRANSFER ASSEMBLY › 2015.08–2017.08
RM2660E _52 Drivetrain _052810 JF2A TRANSFER / 4WD / AWD _0255336 TRANSFER ASSEMBLY A

JF2A TRANSFER / 4WD / AWD  TRANSFER ASSEMBLY  REMOVAL  


PROCEDURE

Hide 53806 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (for AE80F)

Hide 53805 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH (for AE80F)

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (for AE80F)

Hide 51442 4.REMOVE NO. 2 ENGINE UNDER COVER (for AE80F)

Hide 33702B 7.DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY (for AE80F)

Hide 37140 8.REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for AE80F)

Hide 37110 9.REMOVE PROPELLER SHAFT ASSEMBLY (for AE80F)

Hide 17410 10.REMOVE FRONT EXHAUST PIPE ASSEMBLY (for AE80F)

Hide 82284 12.REMOVE GROUND WIRE (for AE80F)

a.
C331305

Remove the 2 bolts and ground wire.


Hide 51203 14.REMOVE NO. 2 FRAME CROSSMEMBER SUB-ASSEMBLY (for AE80F)

Hide 12371 15.REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR (for AE80F)

Hide 36100 16.REMOVE TRANSFER ASSEMBLY (for AE80F)

a.
C329075

Tilt the transmission downward.

NOTICE:

Make sure the cooling fan does not contact the fan shroud.



b.
C331310

Detach the 2 clamps and disconnect the transfer breather hose sub-assembly.


c.
C331307

w/ Temperature Sensor:

Detach the 3 clamps and disconnect the 3 connectors.


d.
C331306

w/o Temperature Sensor:

Detach the 3 clamps and disconnect the 2 connectors.


e.
C331322

Detach the 2 clamps.


f.

Remove the bolt and bracket.


g.
C331309

Support the transfer assembly with a transmission jack.

NOTICE:

Secure the transfer assembly to the transmission jack using a belt, etc. to prevent it from falling.



h.
C211213

Remove the 8 bolts.

CAUTION:

Be sure to perform this procedure with several people as the transfer assembly is very heavy.



i.

Pull the transfer assembly straight up and remove it from the transmission.

NOTICE:

Take care not to damage the adaptor oil seal with the transfer input shaft spline.



Hide 35000 17.REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for A750F)

Hide 33030 19.REMOVE MANUAL TRANSMISSION WITH TRANSFER ASSEMBLY (for H150F)

Hide 36100 20.REMOVE TRANSFER ASSEMBLY (for A750F, AB60F, H150F)

a.
C211213

Remove the 8 bolts.


b.

Pull the transfer assembly straight up and remove it from the transmission.

NOTICE:

Take care not to damage the adaptor oil seal with the transfer input shaft spline.