| While the parking support brake system is operating, no parking support brake notifications are displayed on the multi-information display |
CAN communication system |
 |
| Clearance warning ECU assembly |
 |
| Combination meter assembly |
 |
| While the parking support brake system is operating, no parking support brake notifications are displayed on the multi-display assembly.* |
CAN communication system |
 |
| Clearance warning ECU assembly |
 |
| Multi-display assembly |
 |
| "Parking Support Brake Malfunction Visit Your Dealer" is displayed |
Combination meter assembly |
 |
| Clearance warning ECU assembly |
 |
| "Parking Support Brake Unavailable" is displayed |
Check that no foreign matter is attached to the ultrasonic sensors |
- |
| CAN communication system |
 |
| Combination meter assembly |
 |
| Clearance warning ECU assembly |
 |
| Parking support brake system does not operate when there is a possibility of a collision (Warning message "Parking Support Brake Unavailable" not displayed) |
Check the installation of the ultrasonic sensors (front) |
 |
| Check the installation of the ultrasonic sensors (rear) |
 |
| Adjust the installation of the ultrasonic sensors as necessary |
 |
| Ultrasonic sensors (front) |
 |
| Ultrasonic sensors (rear) |
 |
| Clearance warning ECU assembly |
 |
| Parking support brake system control operates when there is no possibility of a collision |
Check the installation of the ultrasonic sensors (front) |
 |
| Check the installation of the ultrasonic sensors (rear) |
 |
| Adjust the installation of the ultrasonic sensors as necessary |
 |
| Ultrasonic sensors (front) |
 |
| Ultrasonic sensors (rear) |
 |
| Clearance warning ECU assembly |
 |
| Parking support brake system control cannot be turned off (PKSB OFF indicator does not illuminate) |
Meter/gauge system |
 |
| Proceed to "Main Switch Circuit" |
 |
| Clearance warning ECU assembly |
 |
| PKSB OFF indicator illuminate |
Proceed to "Main Switch Circuit" |
 |
| If "Yes" is displayed for the Data List item "BSM Radar Communication Invalid History", the blind spot monitor system may be malfunctioning |
 |
| Check that no foreign matter is attached to the ultrasonic sensors |
- |