Home › Engine / Hybrid System › V35A-FTS (ENGINE CONTROL) › SFI SYSTEM
RM38G0E _51 Engine / Hybrid System _100526 V35A-FTS ENGINE CONTROL _0470271 SFI SYSTEM J

V35A-FTS ENGINE CONTROL  SFI SYSTEM  VC Output Circuit  


DESCRIPTION

The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B, +B2, +B3 (BATT) terminals to operate the microprocessor. The ECM also provides this power to the sensors through the VC output circuit.

A477654E02
1.135,0.833 2.948,1.135 1.813,0.302 10 false from EFI NO. 2 Fuse 0.135,1.969 2.625,2.469 2.49,0.5 10 false to Throttle Position Sensor, Accelerator Pedal Sensor Assembly, etc. (Sensors which have an IC) 0.135,2.646 2.563,3.031 2.427,0.385 10 false to Engine Coolant Temperature Sensor, Intake Air Temperature Sensor, etc. 4.969,3.094 5.313,3.406 0.344,0.313 10 false ECM 2.885,0.677 3.563,1 0.677,0.323 10 false BATT 2.604,1.042 3.875,1.25 1.271,0.208 10 false +B, +B2, +B3 3.063,2.021 3.427,2.25 0.365,0.229 10 false VC 4.396,0.875 6.188,1.229 1.792,0.354 10 false 5 V Constant Voltage Circuit 5.365,1.76 6.354,2.115 0.99,0.354 10 false Microprocessor 4.073,2.844 4.333,3.063 0.26,0.219 10 false R 0.5,1.26 2.49,1.656 1.99,0.396 10 false from EFI-B NO. 1, EFI-B NO. 2, EFI-B NO. 3 Fuse

When the VC circuit has a short circuit, the microprocessor in the ECM and sensors that are supplied power through the VC circuit are deactivated because power is not supplied from the VC circuit. When the system is in this condition, it will not start.

WIRING DIAGRAM

·

For the circuit diagram of the ECM power source refer to the ECM power source circuit.

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>ECM Power Source Circuit

·

VC Output Circuit

A485562E01
0.479,0.688 2.042,1.104 1.563,0.417 10 false Throttle Body with Motor Assembly 5.208,0.5 5.552,0.688 0.344,0.188 10 false C37 5.219,0.865 5.573,1.083 0.354,0.219 10 false C37 5.229,1.229 5.573,1.438 0.344,0.208 10 false C37 5.219,1.594 5.615,1.802 0.396,0.208 10 false C37 2.458,1.198 2.75,1.406 0.292,0.208 10 false VTA 2.396,1.573 2.792,1.781 0.396,0.208 10 false VTA2 5.573,1.229 6.052,1.417 0.479,0.188 10 false VTA1 5.573,1.604 5.969,1.813 0.396,0.208 10 false VTA2 5.583,0.375 5.979,0.583 0.396,0.208 10 false VCTA 2.531,0.479 2.771,0.698 0.24,0.219 10 false VC 5.594,0.729 5.99,0.938 0.396,0.208 10 false ETA 2.552,0.844 2.948,1.052 0.396,0.208 10 false E2 5.229,1.063 5.479,1.271 0.25,0.208 10 false 118 5.271,1.427 5.521,1.635 0.25,0.208 10 false 93 5.219,0.302 5.469,0.51 0.25,0.208 10 false 117 5.219,0.698 5.469,0.906 0.25,0.208 10 false 116 0.479,0.51 0.771,0.719 0.292,0.208 10 false C20 0.448,2.271 2.26,2.688 1.813,0.417 10 false Crankshaft Position Sensor 0.448,2.115 0.74,2.323 0.292,0.208 10 false C17 2.448,2.844 2.802,3.052 0.354,0.208 10 false NE+ 2.552,2.115 2.958,2.313 0.406,0.198 10 false VC 2.49,2.469 2.885,2.677 0.396,0.208 10 false NE- 2.906,1.094 3.156,1.302 0.25,0.208 10 false 1 2.917,1.458 3.167,1.667 0.25,0.208 10 false 3 2.906,0.354 3.156,0.563 0.25,0.208 10 false 2 2.917,0.729 3.167,0.938 0.25,0.208 10 false 4 5.573,2.844 5.927,3.052 0.354,0.208 10 false NE+ 5.594,2.01 6,2.208 0.406,0.198 10 false VCNE 5.573,2.354 5.969,2.563 0.396,0.208 10 false NE- 5.219,2.125 5.625,2.333 0.406,0.208 10 false C37 5.219,2.479 5.573,2.677 0.354,0.198 10 false C37 5.229,2.854 5.542,3.063 0.313,0.208 10 false C37 5.271,2.677 5.521,2.885 0.25,0.208 10 false 90 5.26,1.917 5.51,2.125 0.25,0.208 10 false 72 5.271,2.302 5.521,2.51 0.25,0.208 10 false 71 0.406,3.406 0.698,3.615 0.292,0.208 10 false C11 0.385,3.583 2.292,3.969 1.906,0.385 10 false Camshaft Position Sensor (for Intake Camshaft of bank 1) 2.542,3.427 2.802,3.646 0.26,0.219 10 false VC 2.927,1.948 3.177,2.156 0.25,0.208 10 false 1 2.938,2.333 3.188,2.542 0.25,0.208 10 false 2 2.927,2.708 3.177,2.917 0.25,0.208 10 false 3 2.406,3.781 2.823,4.01 0.417,0.229 10 false VVR- 2.406,4.156 2.823,4.385 0.417,0.229 10 false VVR+ 2.927,3.313 3.177,3.521 0.25,0.208 10 false 3 2.927,3.667 3.177,3.875 0.25,0.208 10 false 2 2.917,4.031 3.167,4.24 0.25,0.208 10 false 1 5.219,3.448 5.552,3.656 0.333,0.208 10 false C37 5.229,3.813 5.563,4.021 0.333,0.208 10 false C37 5.219,4.177 5.552,4.406 0.333,0.229 10 false C37 5.594,3.354 6.104,3.531 0.51,0.177 10 false VCV1 5.594,3.698 6.104,3.875 0.51,0.177 10 false VV1- 5.583,4.177 6.094,4.354 0.51,0.177 10 false VV1+ 5.271,3.25 5.521,3.458 0.25,0.208 10 false 70 5.271,3.635 5.521,3.844 0.25,0.208 10 false 69 5.271,4 5.521,4.208 0.25,0.208 10 false 89 0.385,4.698 0.677,4.906 0.292,0.208 10 false C12 0.385,4.875 2.271,5.25 1.885,0.375 10 false Camshaft Position Sensor (for Intake Camshaft of bank 2) 2.542,4.76 2.802,4.979 0.26,0.219 10 false VC 2.406,5.104 2.823,5.333 0.417,0.229 10 false VVL- 2.375,5.469 2.792,5.698 0.417,0.229 10 false VVL+ 2.917,4.635 3.167,4.844 0.25,0.208 10 false 3 2.917,4.99 3.167,5.198 0.25,0.208 10 false 2 2.917,5.365 3.167,5.573 0.25,0.208 10 false 1 5.219,5.521 5.531,5.74 0.313,0.219 10 false C37 5.281,5.333 5.531,5.542 0.25,0.208 10 false 88 5.573,5.5 6.083,5.677 0.51,0.177 10 false VV2+ 0.396,6 0.688,6.208 0.292,0.208 10 false C13 0.385,6.177 2.25,6.656 1.865,0.479 10 false Camshaft Position Sensor (for Exhaust Camshaft of bank 1) 0.375,7.302 0.667,7.51 0.292,0.208 10 false C14 0.375,7.49 2.229,7.979 1.854,0.49 10 false Camshaft Position Sensor (for Exhaust Camshaft of bank 2) 2.469,6.042 2.781,6.26 0.313,0.219 10 false VC2 2.479,7.302 2.792,7.521 0.313,0.219 10 false VC2 2.521,6.406 2.833,6.625 0.313,0.219 10 false EX- 2.49,6.771 2.802,6.99 0.313,0.219 10 false EX+ 2.51,7.677 2.823,7.896 0.313,0.219 10 false EX- 2.49,8.031 2.802,8.25 0.313,0.219 10 false EX+ 2.906,5.948 3.156,6.156 0.25,0.208 10 false 3 2.906,6.313 3.156,6.521 0.25,0.208 10 false 2 2.906,6.656 3.156,6.865 0.25,0.208 10 false 1 2.927,7.156 3.177,7.365 0.25,0.208 10 false 3 2.927,7.51 3.177,7.719 0.25,0.208 10 false 2 2.917,7.885 3.167,8.094 0.25,0.208 10 false 1 5.219,6.802 5.531,7.021 0.313,0.219 10 false C37 5.219,8.031 5.573,8.25 0.354,0.219 10 false C37 6.042,8.542 6.51,8.74 0.469,0.198 10 false ECM 5.573,8.052 6.083,8.229 0.51,0.177 10 false EV2+ 5.573,6.813 6.083,6.99 0.51,0.177 10 false EV1+ 5.26,6.615 5.51,6.823 0.25,0.208 10 false 87 5.26,7.854 5.51,8.063 0.25,0.208 10 false 86 6.563,0.229 6.958,0.438 0.396,0.208 10 false 5 V 5.219,7.667 5.573,7.885 0.354,0.219 10 false C37 5.229,7.302 5.583,7.521 0.354,0.219 10 false C37 5.229,6.438 5.542,6.656 0.313,0.219 10 false C37 5.229,6.073 5.542,6.292 0.313,0.219 10 false C37 5.229,5.146 5.542,5.365 0.313,0.219 10 false C37 5.229,4.781 5.542,5 0.313,0.219 10 false C37 5.563,5.042 6.073,5.219 0.51,0.177 10 false VV2- 5.573,6.281 6.083,6.458 0.51,0.177 10 false EV1- 5.573,7.542 6.083,7.719 0.51,0.177 10 false EV2- 5.573,4.677 6.083,4.854 0.51,0.177 10 false VCV2 5.271,4.583 5.521,4.792 0.25,0.208 10 false 68 5.281,4.969 5.531,5.177 0.25,0.208 10 false 67 5.271,5.865 5.521,6.073 0.25,0.208 10 false 66 5.271,6.25 5.521,6.458 0.25,0.208 10 false 65 5.573,5.958 6.083,6.135 0.51,0.177 10 false VCE1 5.573,7.188 6.083,7.365 0.51,0.177 10 false VCE2 5.271,7.104 5.521,7.313 0.25,0.208 10 false 64 5.271,7.49 5.521,7.698 0.25,0.208 10 false 63

A485563E01
0.375,0.635 0.833,0.833 0.458,0.198 10 false F4 0.385,0.813 2.021,1.177 1.635,0.365 10 false Fuel Pressure Sensor (for High Pressure Side) 2.604,0.594 2.906,0.813 0.302,0.219 10 false VC 2.604,0.948 2.906,1.167 0.302,0.219 10 false E2 2.604,1.302 2.906,1.521 0.302,0.219 10 false PR 5.677,0.458 6.125,0.677 0.448,0.219 10 false VCPR 5.677,0.823 6.125,1.042 0.448,0.219 10 false EPR 5.667,1.344 6.115,1.563 0.448,0.219 10 false PR 5.292,0.594 5.604,0.792 0.313,0.198 10 false C37 5.302,0.958 5.615,1.156 0.313,0.198 10 false C37 5.302,1.323 5.615,1.521 0.313,0.198 10 false C37 2.979,0.833 3.24,1.031 0.26,0.198 10 false 2 2.969,0.469 3.229,0.667 0.26,0.198 10 false 1 2.979,1.208 3.24,1.406 0.26,0.198 10 false 3 5.292,0.385 5.552,0.583 0.26,0.198 10 false 103 5.302,0.781 5.563,0.979 0.26,0.198 10 false 102 5.344,1.135 5.604,1.333 0.26,0.198 10 false 97 0.396,3.25 0.854,3.448 0.458,0.198 10 false C27 0.375,2.104 2.115,2.531 1.74,0.427 10 false No. 2 Fuel Pressure Sensor (for Low Pressure Side) 2.594,1.927 2.896,2.146 0.302,0.219 10 false VC 2.99,1.792 3.25,1.99 0.26,0.198 10 false 1 2.583,2.281 2.885,2.5 0.302,0.219 10 false E2 2.99,2.146 3.25,2.344 0.26,0.198 10 false 3 2.51,2.646 2.813,2.865 0.302,0.219 10 false PFL 3,2.5 3.26,2.698 0.26,0.198 10 false 2 5.646,2.656 5.948,2.875 0.302,0.219 10 false PFL 5.344,2.469 5.604,2.667 0.26,0.198 10 false 96 0.406,3.448 2.167,3.938 1.76,0.49 10 false Engine Oil Pressure Sensor 0.375,1.917 0.833,2.115 0.458,0.198 10 false G4 2.594,3.24 2.896,3.458 0.302,0.219 10 false VC 2.958,3.146 3.219,3.344 0.26,0.198 10 false 3 2.594,3.594 2.969,3.813 0.375,0.219 10 false E2 2.958,3.479 3.219,3.677 0.26,0.198 10 false 1 2.958,3.844 3.219,4.042 0.26,0.198 10 false 2 5.656,4 6.01,4.219 0.354,0.219 10 false PEO 5.302,3.979 5.615,4.177 0.313,0.198 10 false C37 5.354,3.792 5.615,3.99 0.26,0.198 10 false 73 0.344,4.51 0.802,4.708 0.458,0.198 10 false C23 0.344,4.698 2.156,5.083 1.813,0.385 10 false No. 1 Turbo Pressure Sensor (Bank 1) 2.615,4.521 2.917,4.74 0.302,0.219 10 false VC 2.635,4.875 2.938,5.094 0.302,0.219 10 false E2 2.604,5.25 2.906,5.469 0.302,0.219 10 false PIC 2.5,3.958 2.854,4.177 0.354,0.219 10 false PEO 2.938,5.125 3.198,5.323 0.26,0.198 10 false 2 2.938,4.771 3.198,4.969 0.26,0.198 10 false 1 5.344,5.083 5.604,5.281 0.26,0.198 10 false 42 5.646,5.292 5.948,5.51 0.302,0.219 10 false PIC 0.354,5.76 0.813,5.958 0.458,0.198 10 false C22 0.365,5.948 2.208,6.365 1.844,0.417 10 false No. 1 Turbo Pressure Sensor (Bank 2) 2.531,5.75 2.875,5.969 0.344,0.219 10 false VC2 2.552,6.125 2.854,6.344 0.302,0.219 10 false E22 2.5,6.469 2.854,6.688 0.354,0.219 10 false PIC2 2.938,5.635 3.198,5.833 0.26,0.198 10 false 3 2.938,6.354 3.198,6.552 0.26,0.198 10 false 2 2.938,6 3.198,6.198 0.26,0.198 10 false 1 5.646,6.51 6,6.729 0.354,0.219 10 false PIC2 5.344,5.958 5.604,6.156 0.26,0.198 10 false 43 0.385,7.042 0.844,7.24 0.458,0.198 10 false C21 0.396,7.229 2.323,7.635 1.927,0.406 10 false No. 2 Turbo Pressure Sensor 2.594,7.042 2.896,7.26 0.302,0.219 10 false VC 2.521,7.781 2.823,8 0.302,0.219 10 false PTA 2.615,7.406 2.917,7.625 0.302,0.219 10 false E2 2.938,6.917 3.198,7.115 0.26,0.198 10 false 3 2.938,7.271 3.198,7.469 0.26,0.198 10 false 1 2.938,7.635 3.198,7.833 0.26,0.198 10 false 2 5.302,7.781 5.615,7.979 0.313,0.198 10 false C37 5.302,7.594 5.563,7.792 0.26,0.198 10 false 111 5.646,7.802 5.948,8.021 0.302,0.219 10 false PTA 5.969,8.521 6.365,8.719 0.396,0.198 10 false ECM 2.938,4.406 3.198,4.604 0.26,0.198 10 false 3 5.313,1.927 5.625,2.125 0.313,0.198 10 false C37 5.313,2.281 5.625,2.479 0.313,0.198 10 false C37 5.313,2.646 5.625,2.844 0.313,0.198 10 false C37 5.302,1.729 5.563,1.927 0.26,0.198 10 false 101 5.646,1.792 6.094,2.01 0.448,0.219 10 false VCPF 5.313,2.115 5.573,2.313 0.26,0.198 10 false 100 5.656,2.146 6.063,2.365 0.406,0.219 10 false EPFL 5.313,3.615 5.625,3.813 0.313,0.198 10 false C37 5.302,3.24 5.615,3.438 0.313,0.198 10 false C37 5.354,3.438 5.615,3.635 0.26,0.198 10 false 79 5.354,3.042 5.615,3.24 0.26,0.198 10 false 80 5.656,3.115 6.104,3.333 0.448,0.219 10 false VCPE 5.656,3.469 6.104,3.688 0.448,0.219 10 false EPEO 5.646,5.635 6.094,5.854 0.448,0.219 10 false VPC2 5.656,4.76 6.052,4.969 0.396,0.208 10 false EPIC 5.646,4.406 6.094,4.625 0.448,0.219 10 false VCPC 5.646,5.979 6.042,6.188 0.396,0.208 10 false EPC2 5.292,4.542 5.604,4.74 0.313,0.198 10 false C38 5.302,4.896 5.615,5.094 0.313,0.198 10 false C38 5.302,5.26 5.615,5.458 0.313,0.198 10 false C38 5.313,5.76 5.625,5.958 0.313,0.198 10 false C38 5.302,6.125 5.615,6.323 0.313,0.198 10 false C38 5.302,6.49 5.615,6.688 0.313,0.198 10 false C38 5.333,4.344 5.594,4.542 0.26,0.198 10 false 46 5.333,4.719 5.594,4.917 0.26,0.198 10 false 45 5.333,5.573 5.594,5.771 0.26,0.198 10 false 44 5.344,6.323 5.604,6.521 0.26,0.198 10 false 41 5.313,7.417 5.625,7.615 0.313,0.198 10 false C37 5.302,7.052 5.615,7.25 0.313,0.198 10 false C37 5.646,6.927 6.094,7.146 0.448,0.219 10 false VPTA 5.656,7.271 6.104,7.49 0.448,0.219 10 false EPTA 5.354,6.854 5.615,7.052 0.26,0.198 10 false 92 5.354,7.229 5.615,7.427 0.26,0.198 10 false 91

A485564E01
0.375,0.24 0.833,0.438 0.458,0.198 10 false C45 0.385,0.438 2.188,0.99 1.802,0.552 10 false Waste Gate Valve Position Sensor (Waste Gate Valve Actuator Assembly (Bank 1)) 0.375,1.875 0.833,2.073 0.458,0.198 10 false C46 0.375,2.042 2.208,2.604 1.833,0.563 10 false Waste Gate Valve Position Sensor (Waste Gate Valve Actuator Assembly (Bank 2)) 2.958,0.344 3.417,0.542 0.458,0.198 10 false 5 2.396,0.458 2.854,0.656 0.458,0.198 10 false VCWR 2.406,2.042 2.865,2.24 0.458,0.198 10 false VCWL 2.958,1.927 3.417,2.125 0.458,0.198 10 false 5 2.385,0.802 2.844,1 0.458,0.198 10 false EWGR 2.948,0.708 3.406,0.906 0.458,0.198 10 false 4 2.948,2.292 3.406,2.49 0.458,0.198 10 false 4 2.417,2.406 2.875,2.604 0.458,0.198 10 false EWGL 2.396,1.177 2.854,1.375 0.458,0.198 10 false AWGR 2.417,2.76 2.875,2.958 0.458,0.198 10 false AWGL 2.948,1.063 3.406,1.26 0.458,0.198 10 false 3 2.938,2.646 3.396,2.844 0.458,0.198 10 false 3 5.656,0.344 6.115,0.542 0.458,0.198 10 false VCWG 5.646,0.698 6.104,0.896 0.458,0.198 10 false EWGA 5.635,1.167 6.094,1.365 0.458,0.198 10 false WGA 5.646,2.802 6.104,3 0.458,0.198 10 false WGA2 5.292,0.458 5.563,0.635 0.271,0.177 10 false C37 5.292,0.271 5.563,0.448 0.271,0.177 10 false 107 5.292,0.635 5.563,0.813 0.271,0.177 10 false 106 5.344,1 5.615,1.177 0.271,0.177 10 false 99 5.344,2.604 5.615,2.781 0.271,0.177 10 false 98 0.375,6.385 2.021,7.188 1.646,0.802 10 false Accelerator Pedal Position Sensor (Accelerator Pedal Sensor Assembly) 0.406,3.427 0.865,3.625 0.458,0.198 10 false C24 0.406,3.625 1.906,4.094 1.5,0.469 10 false Mass Air Flow Meter Sub-assembly (Bank 1) 2.552,4.833 3.01,5.031 0.458,0.198 10 false VCC 2.552,5.208 3.01,5.406 0.458,0.198 10 false E2G 2.615,5.563 2.906,5.76 0.292,0.198 10 false FG 5.656,3.448 6.115,3.646 0.458,0.198 10 false VCVG 5.646,3.771 6.104,3.969 0.458,0.198 10 false E2G 5.646,5.615 6.063,5.813 0.417,0.198 10 false VG2 5.344,3.344 5.615,3.521 0.271,0.177 10 false 84 5.354,3.708 5.625,3.885 0.271,0.177 10 false 83 5.344,4.073 5.615,4.25 0.271,0.177 10 false 78 2.969,3.406 3.427,3.604 0.458,0.198 10 false 4 2.969,3.76 3.427,3.958 0.458,0.198 10 false 2 2.979,4.125 3.438,4.323 0.458,0.198 10 false 3 0.448,4.781 0.906,4.979 0.458,0.198 10 false C25 0.438,4.948 1.927,5.458 1.49,0.51 10 false Mass Air Flow Meter Sub-assembly (Bank 2) 2.438,3.521 2.896,3.719 0.458,0.198 10 false VCCR 2.448,3.885 2.906,4.083 0.458,0.198 10 false E2GR 2.531,4.25 2.958,4.448 0.427,0.198 10 false FGR 5.646,4.26 5.938,4.458 0.292,0.198 10 false VG 5.302,3.531 5.573,3.708 0.271,0.177 10 false C37 5.344,5.042 5.615,5.219 0.271,0.177 10 false 81 0.396,6.177 0.844,6.417 0.448,0.24 10 false B17 5.656,6.042 6.125,6.26 0.469,0.219 10 false VCPA 5.333,6.146 5.604,6.323 0.271,0.177 10 false B1 5.344,5.396 5.615,5.573 0.271,0.177 10 false 76 5.344,5.958 5.615,6.135 0.271,0.177 10 false 57 2.948,4.719 3.406,4.917 0.458,0.198 10 false 4 2.958,5.083 3.417,5.281 0.458,0.198 10 false 2 2.958,5.427 3.417,5.625 0.458,0.198 10 false 3 6.094,8.531 6.51,8.729 0.417,0.198 10 false ECM 5.667,1.938 6.125,2.135 0.458,0.198 10 false VCW2 5.625,2.281 6.083,2.479 0.458,0.198 10 false EWG2 5.292,1.885 5.563,2.063 0.271,0.177 10 false 105 5.313,2.25 5.583,2.427 0.271,0.177 10 false 104 5.292,0.813 5.563,0.99 0.271,0.177 10 false C37 5.302,1.188 5.573,1.365 0.271,0.177 10 false C37 5.302,2.063 5.573,2.24 0.271,0.177 10 false C37 5.302,2.427 5.573,2.604 0.271,0.177 10 false C37 5.302,2.792 5.573,2.969 0.271,0.177 10 false C37 5.313,3.885 5.583,4.063 0.271,0.177 10 false C37 5.302,4.26 5.573,4.438 0.271,0.177 10 false C37 5.656,4.729 6.115,4.927 0.458,0.198 10 false VVG2 5.667,5.094 6.125,5.292 0.458,0.198 10 false E2G2 5.344,4.667 5.615,4.844 0.271,0.177 10 false 82 5.302,5.219 5.573,5.396 0.271,0.177 10 false C37 5.302,5.583 5.573,5.76 0.271,0.177 10 false C37 5.292,4.854 5.563,5.031 0.271,0.177 10 false C37 2.448,6.156 2.917,6.375 0.469,0.219 10 false VCPA 5.667,6.396 6.135,6.615 0.469,0.219 10 false VCP2 2.479,6.479 2.948,6.698 0.469,0.219 10 false VCP2 5.635,6.708 6.104,6.927 0.469,0.219 10 false EPA 2.531,6.844 3,7.063 0.469,0.219 10 false EPA 5.646,7.104 6.115,7.323 0.469,0.219 10 false EPA2 2.479,7.208 2.948,7.427 0.469,0.219 10 false EPA2 5.646,7.552 6.115,7.771 0.469,0.219 10 false VPA 2.521,7.563 2.99,7.781 0.469,0.219 10 false VPA 5.646,7.927 6.115,8.146 0.469,0.219 10 false VPA2 2.448,7.906 2.917,8.125 0.469,0.219 10 false VPA2 5.333,6.5 5.604,6.677 0.271,0.177 10 false B1 5.344,6.854 5.615,7.031 0.271,0.177 10 false B1 5.333,7.219 5.604,7.396 0.271,0.177 10 false B1 5.333,7.563 5.604,7.74 0.271,0.177 10 false B1 5.344,7.927 5.615,8.104 0.271,0.177 10 false B1 5.344,6.323 5.615,6.5 0.271,0.177 10 false 60 5.344,6.677 5.615,6.854 0.271,0.177 10 false 56 5.344,7.031 5.615,7.208 0.271,0.177 10 false 59 5.344,7.396 5.615,7.573 0.271,0.177 10 false 55 5.344,7.76 5.615,7.938 0.271,0.177 10 false 58 2.99,6 3.448,6.198 0.458,0.198 10 false 4 2.99,6.354 3.448,6.552 0.458,0.198 10 false 1 2.99,6.719 3.448,6.917 0.458,0.198 10 false 5 2.99,7.104 3.448,7.302 0.458,0.198 10 false 2 2.979,7.813 3.438,8.01 0.458,0.198 10 false 3 2.979,7.458 3.438,7.656 0.458,0.198 10 false 6

A485565E01
0.229,3.125 0.646,3.344 0.417,0.219 10 false C50 0.219,3.313 2.49,3.781 2.271,0.469 10 false Power Steering Oil Pressure Sensor 0.313,1.698 0.729,1.917 0.417,0.219 10 false C40 0.313,1.875 2.208,2.156 1.896,0.281 10 false No. 3 Turbo Pressure Sensor 2.594,3.094 2.896,3.302 0.302,0.208 10 false VC 2.604,3.448 2.906,3.656 0.302,0.208 10 false E2 2.5,3.792 2.969,4.01 0.469,0.219 10 false PSP 2.958,3.302 3.229,3.521 0.271,0.219 10 false 3 2.958,3.646 3.229,3.865 0.271,0.219 10 false 2 2.958,2.958 3.229,3.177 0.271,0.219 10 false 1 5.292,1.719 5.583,1.885 0.292,0.167 10 false C38 5.344,1.521 5.625,1.719 0.281,0.198 10 false 40 5.646,1.594 6.104,1.802 0.458,0.208 10 false VCPM 5.656,1.969 6.073,2.188 0.417,0.219 10 false EPIM 6.073,4.229 6.563,4.448 0.49,0.219 10 false ECM 2.594,1.719 2.896,1.927 0.302,0.208 10 false VC 2.594,2.073 2.896,2.281 0.302,0.208 10 false E2 2.542,2.427 2.844,2.635 0.302,0.208 10 false PIM 2.927,1.594 3.198,1.813 0.271,0.219 10 false 3 2.938,1.938 3.208,2.156 0.271,0.219 10 false 2 2.938,2.281 3.208,2.5 0.271,0.219 10 false 1 5.667,2.438 5.969,2.646 0.302,0.208 10 false PIM 5.302,2.073 5.594,2.24 0.292,0.167 10 false C38 5.313,2.438 5.604,2.604 0.292,0.167 10 false C38 5.344,1.896 5.625,2.094 0.281,0.198 10 false 39 5.354,2.25 5.635,2.448 0.281,0.198 10 false 38 5.667,3.833 6.063,4.063 0.396,0.229 10 false PSP 5.313,3.802 5.604,3.969 0.292,0.167 10 false C38 5.365,3.594 5.646,3.792 0.281,0.198 10 false 33 5.646,0.229 6.104,0.438 0.458,0.208 10 false VCF 5.302,0.354 5.594,0.521 0.292,0.167 10 false C37 5.313,0.719 5.604,0.885 0.292,0.167 10 false C37 5.313,1.083 5.604,1.25 0.292,0.167 10 false C37 5.646,1.073 6.104,1.281 0.458,0.208 10 false NCF 5.646,0.615 6.104,0.823 0.458,0.208 10 false ECF 2.417,0.365 2.875,0.573 0.458,0.208 10 false VCFC 2.427,1.063 2.885,1.271 0.458,0.208 10 false NCFC 2.448,0.698 2.906,0.906 0.458,0.208 10 false E1FC 2.948,0.208 3.219,0.427 0.271,0.219 10 false 4 2.948,0.552 3.219,0.771 0.271,0.219 10 false 6 2.948,0.927 3.219,1.146 0.271,0.219 10 false 5 5.302,0.156 5.583,0.354 0.281,0.198 10 false 113 5.302,0.542 5.583,0.74 0.281,0.198 10 false 112 5.323,0.906 5.604,1.104 0.281,0.198 10 false 108 0.302,0.375 0.719,0.594 0.417,0.219 10 false C8 0.313,0.573 2.208,0.854 1.896,0.281 10 false Fan Speed Sensor


CAUTION / NOTICE / HINT

NOTICE:

Check the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK CONNECTION BETWEEN GTS AND ECM
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

2.CHECK EFI-B NO. 1 FUSE VOLTAGE

B

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

2.CHECK EFI-B NO. 1 FUSE VOLTAGE
a.
A485849C01
0.74,2.969 1.396,2.49 true 0.125,0.125 0.438,0.281 0.313,0.156 10 false *1 0.552,2.938 0.865,3.094 0.313,0.156 10 false *2
*1 No. 2 Engine Room Relay Block and Junction Block Assembly
*2 EFI-B NO. 1 Fuse


Turn the ignition switch to ON.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
1 (EFI-B NO. 1 fuse) - Body ground Ignition switch ON 11 to 14 V


HINT:
·

Check the fuse with it installed to the No. 2 engine room relay block and junction block assembly.

·

If the result is not as specified, since current is not flowing to the +B terminals of the ECM, the system may not be started.




Result:
Proceed to
OK
NG



OK

3.CHECK CONNECTION BETWEEN GTS AND ECM (THROTTLE POSITION SENSOR)

NG

3.CHECK CONNECTION BETWEEN GTS AND ECM (THROTTLE POSITION SENSOR)
a.

Disconnect the throttle body with motor assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the throttle body with motor assembly.

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



A

4.CHECK CONNECTION BETWEEN GTS AND ECM (OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY))

B

REPLACE THROTTLE BODY WITH MOTOR ASSEMBLY (THROTTLE WITH THROTTLE POSITION SENSOR BODY ASSEMBLY)

4.CHECK CONNECTION BETWEEN GTS AND ECM (OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY))
a.

Disconnect the oil pressure sensor (oil pressure sender gauge assembly) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

5.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT OF BANK 1))

B

REPLACE OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY)

5.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT OF BANK 1))
a.

Disconnect the camshaft position sensor (for intake camshaft of bank 1) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

6.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT OF BANK 2))

B

REPLACE CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT OF BANK 1)

6.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT OF BANK 2))
a.

Disconnect the camshaft position sensor (for intake camshaft of bank 2) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

7.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT OF BANK 1))

B

REPLACE CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT OF BANK 2)

7.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT OF BANK 1))
a.

Disconnect the camshaft position sensor (for exhaust camshaft of bank 1) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

8.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT OF BANK 2))

B

REPLACE CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT OF BANK 1)

8.CHECK COMMUNICATION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT OF BANK 2))
a.

Disconnect the camshaft position sensor (for exhaust camshaft of bank 2) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

9.CHECK COMMUNICATION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR (FOR HIGH PRESSURE SIDE))

B

REPLACE CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT OF BANK 2)

9.CHECK COMMUNICATION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR (FOR HIGH PRESSURE SIDE))
a.

Disconnect the fuel pressure sensor (for high pressure side) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the fuel pressure sensor (for high pressure side).

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



A

10.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 2 FUEL PRESSURE SENSOR (FOR LOW PRESSURE SIDE))

B

REPLACE FUEL PRESSURE SENSOR (FOR HIGH PRESSURE SIDE)

10.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 2 FUEL PRESSURE SENSOR (FOR LOW PRESSURE SIDE))
a.

Disconnect the No. 2 fuel pressure sensor (for low pressure side) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the No. 2 fuel pressure sensor (for low pressure side).

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



A

11.CHECK COMMUNICATION BETWEEN GTS AND ECM (POWER STEERING OIL PRESSURE SENSOR)

B

REPLACE NO. 2 FUEL PRESSURE SENSOR (FOR LOW PRESSURE SIDE)

11.CHECK COMMUNICATION BETWEEN GTS AND ECM (POWER STEERING OIL PRESSURE SENSOR)
a.

Disconnect the power steering oil pressure sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

12.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 1 TURBO PRESSURE SENSOR (BANK 1))

B

12.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 1 TURBO PRESSURE SENSOR (BANK 1))
a.

Disconnect the No. 1 turbo pressure sensor (bank 1) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

13.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 1 TURBO PRESSURE SENSOR (BANK 2))

B

REPLACE NO. 1 TURBO PRESSURE SENSOR (BANK 1)

13.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 1 TURBO PRESSURE SENSOR (BANK 2))
a.

Disconnect the No. 1 turbo pressure sensor (bank 2) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

14.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 2 TURBO PRESSURE SENSOR)

B

REPLACE NO. 1 TURBO PRESSURE SENSOR (BANK 2)

14.CHECK COMMUNICATION BETWEEN GTS AND ECM (NO. 2 TURBO PRESSURE SENSOR)
a.

Disconnect the No. 2 turbo pressure sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

15.CHECK COMMUNICATION BETWEEN GTS AND ECM (WASTE GATE VALVE POSITION SENSOR (BANK 1))

B

15.CHECK COMMUNICATION BETWEEN GTS AND ECM (WASTE GATE VALVE POSITION SENSOR (BANK 1))
a.

Disconnect the waste gate valve actuator assembly (bank 1) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the turbocharger sub-assembly.

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



A

16.CHECK COMMUNICATION BETWEEN GTS AND ECM (WASTE GATE VALVE POSITION SENSOR (BANK 2))

B

REPLACE WASTE GATE VALVE ACTUATOR ASSEMBLY (TURBOCHARGER SUB-ASSEMBLY) (BANK 1)

16.CHECK COMMUNICATION BETWEEN GTS AND ECM (WASTE GATE VALVE POSITION SENSOR (BANK 2))
a.

Disconnect the waste gate valve actuator assembly (bank 2) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the turbocharger sub-assembly.

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



A

17.CHECK COMMUNICATION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY (BANK 1))

B

REPLACE WASTE GATE VALVE ACTUATOR ASSEMBLY (TURBOCHARGER SUB-ASSEMBLY) (BANK 2)

17.CHECK COMMUNICATION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY (BANK 1))
a.

Disconnect the mass air flow meter sub-assembly (bank 1) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



A

18.CHECK COMMUNICATION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY (BANK 2))

B

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY (BANK 1)

18.CHECK COMMUNICATION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY (BANK 2))
a.

Disconnect the mass air flow meter sub-assembly (bank 2) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B


HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>V35A-FTS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



A

19.CHECK COMMUNICATION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)

B

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY (BANK 2)

19.CHECK COMMUNICATION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)
a.

Disconnect the crankshaft position sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

20.CHECK COMMUNICATION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)

B

20.CHECK COMMUNICATION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
a.

Disconnect the accelerator pedal sensor assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

21.CHECK CONNECTION BETWEEN GTS AND ECM (NO. 3 TURBO PRESSURE SENSOR)

B

REPLACE ACCELERATOR PEDAL SENSOR ASSEMBLY (ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY)

21.CHECK CONNECTION BETWEEN GTS AND ECM (NO. 3 TURBO PRESSURE SENSOR)
a.

Disconnect the No. 3 turbo pressure sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

22.CHECK CONNECTION BETWEEN GTS AND ECM (FAN SPEED SENSOR (FLUID COUPLING ASSEMBLY))

B

22.CHECK CONNECTION BETWEEN GTS AND ECM (FAN SPEED SENSOR (FLUID COUPLING ASSEMBLY))
a.

Disconnect the fan speed sensor (fluid coupling assembly) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

23.CHECK HARNESS AND CONNECTOR

B

REPLACE FAN SPEED SENSOR (FLUID COUPLING ASSEMBLY)

23.CHECK HARNESS AND CONNECTOR
a.

Disconnect the throttle body with motor assembly connector.


b.

Disconnect the crankshaft position sensor connector.


c.

Disconnect the camshaft position sensor (for intake camshaft of bank 1) connector.


d.

Disconnect the camshaft position sensor (for intake camshaft of bank 2) connector.


e.

Disconnect the camshaft position sensor (for exhaust camshaft of bank 1) connector.


f.

Disconnect the camshaft position sensor (for exhaust camshaft of bank 2) connector.


g.

Disconnect the fuel pressure sensor (for high pressure side) connector.


h.

Disconnect the No. 2 fuel pressure sensor (for low pressure side) connector.


i.

Disconnect the No. 1 turbo pressure sensor (bank 1) connector.


j.

Disconnect the No. 1 turbo pressure sensor (bank 2) connector.


k.

Disconnect the No. 2 turbo pressure sensor connector.


l.

Disconnect the power steering oil pressure sensor connector.


m.

Disconnect the oil pressure sensor connector.


n.

Disconnect the waste gate valve actuator assembly (bank 1) connector.


o.

Disconnect the waste gate valve actuator assembly (bank 2) connector.


p.

Disconnect the mass air flow meter sub-assembly (bank 1) connector.


q.

Disconnect the mass air flow meter sub-assembly (bank 2) connector.


r.

Disconnect the accelerator pedal sensor assembly connector.


s.

Disconnect the No. 3 turbo pressure sensor connector.


t.

Disconnect the fan speed sensor (fluid coupling assembly) connector.


u.

Disconnect the ECM connectors.


v.

Remove the EFI MAIN NO. 1 relay from the No. 2 engine room relay block and junction block assembly.


w.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(C37,C38,B1)Location & Routing

Click Connector(C37)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>ECM

Click Connector(C38)Engine Compartment>Connecting Wire / Cooling Fan Wire / Engine Wire / Fuel Pump Motor Wire / No. 1 Connecting Wire / No. 10 Engine Wire / No. 2 Connecting Wire / No. 3 Connecting Wire / No. 4 Connecting Wire / Sensor Wire / Turbocharger Wire>ECM

Click Connector(B1)Engine Compartment>Engine Room Main Wire / Lamp Wire / No. 2 Engine Room Wire / No. 2 Lamp Wire / No. 3 Engine Room Wire / No. 6 Engine Room Wire / Washer Wiring Assembly>ECM

C37-117 (VCTA) - Body ground Always 10 kΩ or higher
C37-72 (VCNE) - Body ground Always 10 kΩ or higher
C37-70 (VCV1) - Body ground Always 10 kΩ or higher
C37-68 (VCV2) - Body ground Always 10 kΩ or higher
C37-66 (VCE1) - Body ground Always 10 kΩ or higher
C37-64 (VCE2) - Body ground Always 10 kΩ or higher
C37-103 (VCPR) - Body ground Always 10 kΩ or higher
C37-101 (VCPF) - Body ground Always 10 kΩ or higher
C37-80 (VCPE) - Body ground Always 10 kΩ or higher
C38-46 (VCPC) - Body ground Always 10 kΩ or higher
C38-44 (VPC2) - Body ground Always 10 kΩ or higher
C37-92 (VPTA) - Body ground Always 10 kΩ or higher
C37-107 (VCWG) - Body ground Always 10 kΩ or higher
C37-105 (VCW2) - Body ground Always 10 kΩ or higher
C37-84 (VCVG) - Body ground Always 10 kΩ or higher
C37-82 (VVG2) - Body ground Always 10 kΩ or higher
B1-57 (VCPA) - Body ground Always 10 kΩ or higher
B1-60 (VCP2) - Body ground Always 10 kΩ or higher
C37-113 (VCF) - Body ground Always 10 kΩ or higher
C38-40 (VCPM) - Body ground Always 10 kΩ or higher
5 (EFI MAIN NO. 1 relay) - C38-12 (+B) Always Below 1 Ω
5 (EFI MAIN NO. 1 relay) - C38-11 (+B2) Always Below 1 Ω
5 (EFI MAIN NO. 1 relay) - C38-10 (+B3) Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR