Home › Engine / Hybrid System › 1VD-FTV (INTAKE / EXHAUST) › EXHAUST MANIFOLD W/ TURBOCHARGER (w/ DPF) › from 2022.09
RM25T0E _51 Engine / Hybrid System _029894 1VD-FTV INTAKE / EXHAUST _0290061 EXHAUST MANIFOLD W/ TURBOCHARGER(w/ DPF) A

1VD-FTV INTAKE / EXHAUST  EXHAUST MANIFOLD W/ TURBOCHARGER(w/ DPF)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL STUD BOLT

A165361

a.

Using an E10 "TORX" socket wrench, install the 6 stud bolts to the turbocharger sub-assembly.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 17274 2.INSTALL INLET COMPRESSOR ELBOW

A164244

a.

Install a new gasket and the inlet compressor elbow to the turbocharger sub-assembly with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 15481 3.INSTALL NO. 1 TURBO OIL PIPE

A164243

a.

Install a new gasket and the No. 1 turbo oil pipe to the turbocharger sub-assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

HINT:

Install the gasket with the gasket's claws facing the No. 1 turbo oil pipe.



Hide 15407 4.INSTALL INLET TURBO OIL PIPE SUB-ASSEMBLY

A164246C01
1.74,0.719 2.271,0.313 2.271,0.313 2.448,0.313 true 2.5,0.198 2.719,0.375 0.219,0.177 10 false *1
*1 Union Bolt


a.

Install a new gasket and the union bolt.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)


b.

Install the inlet turbo oil pipe sub-assembly to the turbocharger sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 17141 5.INSTALL EXHAUST MANIFOLD RH

a.
A333979C01
0,0 0,0 false
V100135

Front


Install a new gasket to the cylinder head sub-assembly RH.


b.
A162130C01
1.396,2.417 1.5,2.573 1.5,2.573 1.625,2.573 true 1.667,2.479 1.896,2.667 0.229,0.188 10 false *a
*a Colored Side


Install the exhaust manifold RH and 10 collars with 10 new nuts.

Torque:
36 N*m (367 kgf*cm, 27 ft.*lbf)

NOTICE:

Install the collars with the collars' colored side facing the nuts.



Hide 17142 6.INSTALL EXHAUST MANIFOLD LH

a.

Install a new gasket and the turbocharger sub-assembly to the exhaust manifold LH with 3 new nuts.

Torque:
69 N*m (704 kgf*cm, 51 ft.*lbf)


b.
A328276C01
0,0 0,0 false
V100135

Front


Set a new gasket to the cylinder head sub-assembly LH.


c.
A391822C01
1.073,2.552 1.208,2.833 1.208,2.833 1.365,2.833 true 1.406,2.74 1.719,2.896 0.313,0.156 10 false *a
*a Colored Side


Install the exhaust manifold LH with turbocharger sub-assembly with 10 new nuts and the 10 collars.

Torque:
36 N*m (367 kgf*cm, 27 ft.*lbf)

NOTICE:

Install the collars with the collars' colored side facing the nuts.



Hide 17192 7.INSTALL NO. 2 EXHAUST MANIFOLD PIPE

a.
A391808C01
0.677,1.438 0.677,1.198 0.677,1.198 1.167,1.198 false 0.833,1.396 0.833,1.198 false 0.813,1.729 0.813,1.969 0.813,1.969 1.427,1.969 false 0.958,1.969 0.958,1.719 false 1.271,1.135 1.583,1.292 0.313,0.156 10 false *a 1.49,1.896 1.802,2.052 0.313,0.156 10 false *a
*a Gasket Claw


Install 2 new gaskets to the No. 2 exhaust manifold pipe.

HINT:

The gasket claws should face the No. 2 exhaust manifold pipe.



b.

Install the No. 2 exhaust manifold pipe to the exhaust manifold LH with 2 nuts and 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 17293 8.INSTALL TURBOCHARGER STAY

Hide 17106 9.INSTALL EXHAUST CROSSOVER PIPE SUB-ASSEMBLY

a.
A164748N01
2.49,0.073 2.667,0.26 0.177,0.188 10 true A 0.063,0.906 0.323,1.177 0.26,0.271 10 false C 2.979,0.438 3.094,0.615 0.115,0.177 10 false B 3.188,0.813 3.365,1 0.177,0.188 10 false C 3.26,1.844 3.427,2.021 0.167,0.177 10 false C 0.135,1.958 0.313,2.146 0.177,0.188 10 false C 0.792,1.698 0.958,1.896 0.167,0.198 10 true C 0.99,1.26 1.146,1.458 0.156,0.198 10 true D 2.552,1.698 2.708,1.896 0.156,0.198 10 true C 0.365,0.406 0.5,0.604 0.135,0.198 10 true D 1.083,0.031 1.25,0.219 0.167,0.188 10 true E

Temporarily install the No. 1 and No. 2 manifold stays to the exhaust crossover pipe sub-assembly with the 2 bolts labeled A and E shown in the illustration.

HINT:

Make sure the manifold stays and exhaust crossover pipe sub-assembly are contacting each other.



b.

Install a new gasket to the exhaust manifold RH and a new gasket to the exhaust manifold LH.


c.

Temporarily install the exhaust crossover pipe sub-assembly with the bolt labeled B, 6 nuts labeled C, and 2 bolts labeled D.

HINT:

Make sure to tighten the nuts labeled C so that the exhaust crossover pipe sub-assembly and exhaust manifold are contacting each other.



d.

Tighten the bolt labeled B.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


e.

Tighten the bolts labeled D.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


f.

Tighten the nuts labeled C.

Torque:
69 N*m (704 kgf*cm, 51 ft.*lbf)


g.

Tighten the bolt labeled A.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


h.

Tighten the bolt labeled E.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


Hide 12101 12.INSTALL OIL PAN SUB-ASSEMBLY

Hide 15614 14.INSTALL LOWER OIL FILTER ELEMENT COVER

Hide 12102A 15.CHECK NO. 2 OIL PAN SUB-ASSEMBLY

Hide 12102A 16.INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

Hide 12201 18.INSTALL VENTILATION TUBE SUB-ASSEMBLY

Hide 25708 19.INSTALL NO. 3 VACUUM TRANSMITTING PIPE SUB-ASSEMBLY

Hide 15474A 20.INSTALL OUTLET TURBO OIL HOSE

Hide 83520 22.INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY

Hide 15407 23.CONNECT INLET TURBO OIL PIPE SUB-ASSEMBLY

Hide 15769 24.CONNECT OIL COOLER PIPE

Hide 16027 26.INSTALL NO. 1 TURBO WATER PIPE SUB-ASSEMBLY

A164249

a.

Install a new gasket and the No. 1 turbo water pipe sub-assembly to the turbocharger sub-assembly with 2 new nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.
A164250

Install the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the No. 2 turbo water hose from the No. 1 turbo water pipe sub-assembly, and slide the clip to secure the hose.


d.
A164251

Install the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


e.

Connect the No. 1 turbo water hose from the No. 1 turbo water pipe sub-assembly, and slide the clip to secure the hose.


Hide 17361J 27.INSTALL NO. 1 AIR TUBE

A165358

a.

Install a new gasket and the No. 1 air tube with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

HINT:

Install the gasket with the gasket's claws facing the turbocharger sub-assembly.



Hide 17343D 28.INSTALL NO. 3 AIR HOSE

A165356C01
1.385,0.271 1.594,0.469 0.208,0.198 10 false *a
*a Upper


a.

Install the No. 3 air hose to the turbocharger sub-assembly with the clamp.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)

HINT:

Install the clamp as shown in the illustration.



Hide 17362B 29.INSTALL NO. 2 AIR TUBE

A165357C01
2.208,0.219 2.427,0.427 0.219,0.208 10 false *a
*a Upper


a.

Connect the No. 2 air tube to the No. 3 air hose with the 2 clamps.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)

HINT:

Install the clamp as shown in the illustration.



b.

Install the No. 2 air tube with the bolt.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 17878 30.INSTALL NO. 3 INTAKE AIR CONNECTOR PIPE

Hide 16620D 31.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

Hide 16603B 32.INSTALL IDLER PULLEY SUB-ASSEMBLY

Hide 15778 33.CONNECT NO. 2 OIL COOLER HOSE

Hide 27280 35.INSTALL GENERATOR SPLASH GUARD COVER ASSEMBLY

Hide 16400 36.INSTALL RADIATOR ASSEMBLY

Hide 16572D 37.CONNECT NO. 2 RADIATOR HOSE

Hide 16371 38.INSTALL FAN PULLEY

Hide 16470 40.INSTALL RADIATOR RESERVOIR ASSEMBLY

Hide 16361A 41.INSTALL FAN AND GENERATOR V-RIBBED BELT

Hide 17875 42.INSTALL INTAKE AIR CONNECTOR PIPE

Hide 43.INSTALL INTAKE AIR CONNECTOR ASSEMBLY

Hide 44.INSTALL AIR CLEANER CASE SUB-ASSEMBLY

Hide 17705 45.INSTALL AIR CLEANER CAP SUB-ASSEMBLY

a.

Install the air cleaner filter element sub-assembly to the air cleaner case sub-assembly.


b.

Attach the 4 clamps to install the air cleaner cap sub-assembly to the air cleaner case sub-assembly.


Hide 17881 46.INSTALL NO. 1 AIR CLEANER HOSE

Hide 17167 47.INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.

Install the No. 1 exhaust manifold heat insulator with the 3 bolts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 17168 48.INSTALL NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

a.

Install the No. 2 exhaust manifold heat insulator with the 3 bolts.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


b.

w/ Air Conditioning System:

Install the No. 1 fuel tube bracket with the 2 bolts.

Attach the clamp.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


c.

Install the fuel tube bracket with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


d.

Attach the engine wire.


Hide 49.INSTALL TUBE SUB-ASSEMBLY (w/ Air Conditioning System)

Hide 16571C 50.INSTALL NO. 1 RADIATOR HOSE

Hide 17940D 52.INSTALL INTERCOOLER ASSEMBLY

Hide 87249B 54.CONNECT OUTLET HEATER WATER PIPE B

Hide 17410 55.INSTALL FRONT EXHAUST PIPE ASSEMBLY

a.

Temporarily install a new gasket to the front exhaust pipe assembly by hand.

HINT:

Be sure to install the gasket as evenly as possible.



b.
A104635C27
2.583,0.948 2.927,0.948 true 1.49,0.365 1.667,0.365 1.667,0.365 2.167,0.625 true 2.969,0.844 3.188,1.042 0.219,0.198 10 false *a 1.281,0.26 1.49,0.448 0.208,0.188 10 false *1
*1 Gasket
*a Wooden Block


Using a plastic-faced hammer and wooden block, tap the gasket onto the front exhaust pipe assembly so that the gasket is flush with the pipe end.

NOTICE:
·

Install the gasket in the correct direction.

·

Do not damage the outer surface of the gasket.

·

Do not reuse the gasket.

·

Do not push in the gasket with the exhaust pipe when connecting it.




c.
A162138

Install a new gasket onto the outlet turbine elbow.


d.
A391805

Loosely install the front exhaust pipe assembly with 3 new nuts.

HINT:

Tighten the nuts until the contact surface of the front exhaust pipe assembly contacts with the outlet turbine elbow.



e.

for Single Cab:

i.

Install the No. 2 frame crossmember sub-assembly with the 4 bolts and 6 nuts.

Click hereDrivetrain>H152F (MANUAL TRANSMISSION / TRANSAXLE)>MANUAL TRANSMISSION ASSEMBLY>INSTALLATION



f.
A395577

Attach the clamp and connect the exhaust gas temperature sensor connector.


g.
A391800

Loosely install the front exhaust pipe assembly to the No. 1 exhaust pipe support with the 4 bolts.

HINT:

Tighten the bolts so that the position of the front exhaust pipe assembly can be adjusted in a later step.



h.
A391802

Loosely install the front exhaust pipe assembly to the No. 2 frame crossmember sub-assembly with the 2 bolts.

HINT:

Tighten the bolts so that the position of the front exhaust pipe assembly can be adjusted in a later step.



i.

Tighten the 3 nuts of the front exhaust pipe assembly.

Torque:
47 N*m (479 kgf*cm, 35 ft.*lbf)


j.

Tighten the 4 bolts of the front exhaust pipe assembly to the No. 1 exhaust pipe support.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


k.

Tighten the 2 bolts of the front exhaust pipe assembly to the No. 2 frame crossmember sub-assembly.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


l.
A391347C01
2.219,3.094 2.646,3.094 2.646,3.094 2.646,2.854 false 1.99,3 2.302,3.156 0.313,0.156 10 false *a
*a Tape


Attach the clamp and connect the No. 3 exhaust gas temperature sensor connector.

HINT:

Make sure that the tape is in the position shown in the illustration.



m.
A391346C01
2.156,3.063 2.292,3.063 2.292,3.063 2.292,2.906 false 1.979,2.958 2.292,3.115 0.313,0.156 10 false *a
*a Tape


Attach the clamp and connect the No. 2 exhaust gas temperature sensor connector.

HINT:

Make sure that the tape is in the position shown in the illustration.



n.
A391801

Connect the 2 air hoses to the front exhaust pipe assembly with 2 new clips.

NOTICE:
·

Align the paint marks of the front exhaust pipe assembly and air hose and push on the air hose until it contacts the stopper.

·

Make sure that there is no slack in the air hose, and that it is not twisted or bent.

·

Take care not to damage the inner or outer surface of the air hose when installing it. If the air hose is damaged, replace it with a new one.




Hide 17402 56.INSTALL FRONT NO. 2 EXHAUST PIPE SUB-ASSEMBLY

a.

Inspect the compression spring.

i.
A104634

Using a vernier caliper, measure the free length of the compression spring.

Standard free length:

43 mm (1.69 in.)


If the free length is not as specified, replace the compression spring.



b.
A392052C01
0.958,2.125 1.271,2.281 0.313,0.156 10 false *a 2.177,2.146 2.49,2.302 0.313,0.156 10 false *b
*a CORRECT
*b INCORRECT


Connect the front No. 2 exhaust pipe sub-assembly to the front exhaust pipe assembly with the 2 bolts and 2 compression springs.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)

NOTICE:
·

When tightening the bolts, make sure the lengths of the springs are approximately the same.

·

Make sure the joint part is movable.

·

Make sure the bolts do not get caught on the flange.




c.
A328278

Install a new gasket onto the front No. 2 exhaust pipe sub-assembly.


d.

for Long Wheelbase, Semi-long Wheelbase:

Install the front No. 2 exhaust pipe sub-assembly with 2 new bolts and 2 new nuts.

Torque:
48 N*m (489 kgf*cm, 35 ft.*lbf)


e.

for Super Long Wheelbase:

Install the front No. 2 exhaust pipe sub-assembly with 2 new nuts.

Torque:
48 N*m (489 kgf*cm, 35 ft.*lbf)


f.

Connect the air fuel ratio sensor connector.


g.

except Long Wheelbase:

Install the 2 nuts to the exhaust pipe support cushion.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 11452 57.INSTALL NO. 1 ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 12142 58.INSTALL NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 59.INSTALL ENGINE OIL LEVEL DIPSTICK

Hide 62.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 63. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 67.INSPECT FOR EXHAUST GAS LEAK

If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.

Hide 51442 68.INSTALL NO. 2 ENGINE UNDER COVER

Hide 53737B 69.INSTALL FRONT FENDER APRON SEAL LH

a.

Install the front fender apron seal LH with the 11 clips.


Hide 53736 70.INSTALL FRONT FENDER APRON SEAL RH

a.

Install the front fender apron seal RH with the 11 clips.


Hide 71.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

Hide 73.CHECK FOR REFRIGERANT GAS LEAK