Home › BRAKE › BRAKE › BRAKE SYSTEM

BRAKE SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Brake system 
Symptom
Suspected area
See page
Low pedal or spongy pedal
1. Fluid leaks for brake system
-
2. Air in brake system
Click here
3. Front brake piston seals (Worn or damaged)
Click here
4. Rear brake wheel cylinder cups (Worn or damaged)
Click here
5. Master cylinder (Faulty)
Click here
6. Push rod (Out of adjustment)
Click here
7. Stroke simulator cylinder (Faulty)
Click here
Brake drag
1. Brake pedal free play (Minimal)
Click here
2. Parking brake pedal travel (Out of adjustment)
Click here
3. Parking brake cable (Sticking)
Click here
4. Rear brake shoe clearance (Out of adjustment)
Click here
5. Front brake pad (Cracked or distorted)
Click here
6. Rear brake lining (Cracked or distorted)
Click here
7. Front brake piston (Stuck or frozen)
Click here
8. Rear brake wheel cylinder piston (Stuck or frozen)
Click here
9. Tension or return spring (Faulty)
Click here
10. Push rod (Out of adjustment)
Click here
11. Master cylinder (Faulty)
Click here
Brake pull
1. Front brake piston (Stuck)
Click here
2. Rear brake wheel cylinder piston (Stuck)
Click here
3. Front brake pad (Oily, cracked or distorted)
Click here
4. Rear brake lining (Oily, cracked or distorted)
Click here
5. Front brake piston (Frozen)
Click here
6. Rear brake wheel cylinder piston (Frozen)
Click here
7. Disc (Scored)
Click here
Hard pedal but brake inefficient
1. Brake pedal (Out of adjustment, faulty)
Click here
2. Front brake piston (Frozen)
Click here
3. Rear brake wheel cylinder piston (Frozen)
Click here
4. Front brake pad (Cracked, distorted, glazed or oily)
Click here
5. Rear brake lining (Cracked, distorted, glazed or oily)
Click here
6. Disc (Oily)
Click here
7. Push rod (Out of adjustment)
Click here
Noise from brake
1. Front brake pad (Cracked, distorted, dirty or glazed)
Click here
2. Rear brake lining (Cracked, distorted, dirty or glazed)
Click here
3. Installation bolt (Loose)
Click here
4. Disc (Scored)
Click here
5. Pad support plate (Loose)
Click here
6. Slide pin (Worn)
Click here
7. Tension or return spring (Faulty)
Click here
8. Anti-squeal shim (Damaged)
Click here
9. Shoe hold-down spring (Damaged)
Click here