Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › 2018.10–2019.02
RM3620E _56 Audio / Visual / Telematics _076129 PARK ASSIST / MONITORING _0370833 BLIND SPOT MONITOR SYSTEM T

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  PROBLEM SYMPTOMS TABLE  


NOTICE:
·

The vehicle is equipped with a Supplemental Restraint System (SRS) which includes components such as airbags. Before servicing (including removal or installation of parts), be sure to read the precaution for Supplemental Restraint System.

w/o Occupant Classification System

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/o Occupant Classification System)>PRECAUTION

w/ Occupant Classification System (for HV Model with Occupant Classification System)

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for HV Model with Occupant Classification System)>PRECAUTION

w/ Occupant Classification System (for Gasoline Model with Occupant Classification System)

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for Gasoline Model with Occupant Classification System)>PRECAUTION

·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.



HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Entire System
Symptom Suspected Area Link
System does not operate at all CAN communication system*2 Click here
CAN communication system*1 Click here
Meter/gauge system Click here
Proceed to "Power Source Circuit" Click here
Steering pad switch assembly Click here
Spiral cable sub-assembly Click here
Blind spot monitor sensor LH Click here
System cannot be turned off CAN communication system*2 Click here
CAN communication system*1 Click here
Meter/gauge system Click here
Steering pad switch assembly Click here
Spiral cable sub-assembly Click here
Blind spot monitor sensor LH Click here
"Blind Spot Monitor Unavailable" or "Blind Spot Monitor Malfunction Visit Your Dealer" is displayed on the multi-information display Check abnormality history Click here
Blind spot monitor sensor RH Click here
Blind spot monitor sensor LH Click here
Combination meter assembly Click here

*1: for Gasoline Model

*2: for HV Model

Blind Spot Monitor Function
Symptom Suspected Area Link
Outer rear view mirror indicator LH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Outer mirror LH (outer rear view mirror indicator LH) Click here
Outer rear view mirror assembly LH Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Outer mirror RH (outer rear view mirror indicator RH) Click here
Outer rear view mirror assembly RH Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section Click here
Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section Click here
Blind spot monitor sensor RH Click here
Outer rear view mirror indicator LH continues to flash Blind spot monitor sensor LH Click here
Outer rear view mirror indicator RH continues to flash Blind spot monitor sensor RH Click here

RCTA Function
Symptom Suspected Area Link
Function does not operate at all
(Blind spot monitor function operates normally)
Data List / Active Test (Reverse [Only for MT])*4 Click here
Data List / Active Test (Reverse [Only for AT/CVT])*3 Click here
Hybrid control system*2 Click here
Automatic transaxle system (UB80E)*3 Click here
Automatic transaxle system (UB80F)*3 Click here
Continuously variable transaxle system (K120)*3 Click here
Continuously variable transaxle system (K120F)*3 Click here
Proceed to "Reverse Signal Circuit" *4 Click here
Blind spot monitor sensor RH Click here
"Rear Cross Traffic Alert Unavailable" or "Rear Cross Traffic Alert Malfunction Visit Your Dealer" is displayed on the multi-information display Check abnormality history Click here
Blind spot monitor sensor RH Click here
Blind spot monitor sensor LH Click here
Combination meter assembly Click here
While RCTA function is active, outer rear view mirror indicator flashes but RCTA buzzer does not sound. Proceed to "Buzzer does not Sound" Click here
When shift position is in R, detection operation is normal but RCTA indicator does not appear on multi-display CAN communication system*1 Click here
CAN communication system*2 Click here
Television camera assembly*5 Click here
Parking assist ECU *6 Click here
Blind spot monitor sensor LH Click here
Blind spot monitor sensor RH Click here
Radio and display receiver assembly Click here

*1: for Gasoline Model

*2: for HV Model

*3: except Manual Transaxle

*4: for Manual Transaxle

*5: w/ Parking Assist Monitor System

*6: w/ Panoramic View Monitor System