Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Inspect the fuse and relay before confirming the suspected area as shown in the table below.


Radio receiver assembly 
Symptom
Suspected area
See page
Pressing power switch does not start system
1. Power source circuit (radio receiver assembly)
Click here
2. Radio receiver assembly
Click here
Radio receiver cannot be dimmed at night
1. Illumination circuit
Click here
2. Radio receiver assembly
Click here
No sound can be heard (Separate amplifier)
1. Power source circuit (radio receiver assembly)
Click here
2. Power source circuit (stereo component amplifier assembly)
Click here
3. AMP sound signal circuit
Click here
4. Speaker circuit
Click here
5. AVC-LAN circuit
Click here
6. AMP mute signal circuit
Click here
7. Stereo component amplifier assembly
Click here
8. Radio receiver assembly
Click here
No sound can be heard (Build-in amplifier)
1. Power source circuit (radio receiver assembly)
Click here
2. Speaker circuit
Click here
3. Radio receiver assembly
Click here
Sound quality is bad in all modes (volume is too low) (Separate amplifier)
1. Power source circuit (radio receiver assembly)
Click here
2. Power source circuit (stereo component amplifier assembly)
Click here
3. Speaker circuit
Click here
4. AMP sound signal circuit
Click here
5. Sound quality is bad in all modes (volume is too low)
Click here
Sound quality is bad in all modes (volume is too low) Built-in amplifier
1. Power source circuit (radio receiver assembly)
Click here
2. Speaker circuit
Click here
3. Sound quality is bad in all modes (volume is too low)
Click here
Noise occurs
Noise occurs
Click here
Radio broadcast cannot be received (bad reception)
Radio broadcast cannot be received (bad reception)
Click here
CD cannot be inserted or is ejected immediately after insertion
1. Power source circuit (radio receiver assembly)
Click here
2. CD cannot be inserted or is ejected immediately after insertion
Click here
CD cannot be eject
1. Power source circuit (radio receiver assembly)
Click here
2. CD cannot be ejected
Click here
Sound quality is bad only when playing CD (volume is too low)
Sound quality is bad only when playing CD (volume is too low)
Click here
CD sound skips
CD sound skips
Click here

Steering pad switch 
Symptom
Suspected area
See page
Audio system cannot be operated with steering pad switch
1. Steering pad switch circuit
Click here
2. Radio receiver assembly
Click here