Home › Engine / Hybrid System › M15A-FKS (ENGINE MECHANICAL) › ENGINE UNIT
RM3700E _51 Engine / Hybrid System _093330 M15A-FKS ENGINE MECHANICAL _0440540 ENGINE UNIT A

M15A-FKS ENGINE MECHANICAL  ENGINE UNIT  DISASSEMBLY  


CAUTION / NOTICE / HINT

COMPONENTS (DISASSEMBLY)
A459758N01
1.583,4.563 1.583,4.396 1.583,4.396 1.948,4.167 false 4.51,1.135 4.76,1.135 false 3.844,0.635 4.271,0.635 false 4.781,1.917 5.115,1.917 false 5.667,2.75 5.833,2.75 5.833,2.75 6,3.177 false 6.083,3.917 6.167,4.167 6.167,4.167 6.167,4.333 false 2.719,4.781 2.854,5 2.854,5 2.854,5.167 false 1.604,3.667 1.865,3.667 false 0.75,3.583 0.75,3.417 0.75,3.417 1.5,3.25 false 0.583,3.083 0.958,3.083 false 1.583,1.802 2,1.802 false 2.167,1 2.333,1 2.333,1 2.542,1.604 false 2.375,2.5 2.802,2.5 false 3.469,2.063 3.729,2.063 false 3.51,1.729 3.771,1.729 false 5.531,3.583 5.531,3.917 false 2.667,3.833 2.667,3.667 2.667,3.667 2.917,3.5 false 4.615,0.656 4.875,0.656 false 4.844,1.479 5.188,1.479 false 1,1.083 1.167,1.083 1.167,1.083 1.927,1.417 false 1.063,1.417 1.49,1.417 false 3.667,0.458 3.948,0.813 0.281,0.354 18 false 1 1.667,4.563 1.948,4.917 0.281,0.354 18 false 2 5.438,2.552 5.719,2.906 0.281,0.354 18 false 3 5.458,1.771 5.74,2.125 0.281,0.354 18 false 4 5.125,0.958 5.406,1.313 0.281,0.354 18 false 5 1.406,1.625 1.688,1.979 0.281,0.354 18 false 6 1.99,0.813 2.271,1.167 0.281,0.354 18 false 7 0.396,2.917 0.677,3.271 0.281,0.354 18 false 8 1.427,3.458 1.708,3.813 0.281,0.354 18 false 9 3.177,1.594 3.792,1.958 0.615,0.365 18 false 10 3.188,1.927 3.76,2.354 0.573,0.427 18 false 11 2.896,5.125 3.479,5.469 0.583,0.344 18 false 12 2.083,2.365 2.677,2.729 0.594,0.365 18 false 13 6.229,4.323 6.823,4.75 0.594,0.427 18 false 14 5.5,3.938 5.781,4.292 0.281,0.354 10 false ● 2.625,3.833 2.906,4.188 0.281,0.354 10 false ● 4.927,0.563 5.292,0.823 0.365,0.26 10 false ●★ 5.24,1.375 5.552,1.688 0.313,0.313 10 false ●★ 0.708,3.594 0.99,3.948 0.281,0.354 10 false ● 0.698,0.979 1.208,1.24 0.51,0.26 10 false ●★ 0.771,1.313 1.156,1.656 0.385,0.344 10 false ●★ 1.677,1.354 1.99,1.552 0.313,0.198 10 false x2 2.094,1.365 2.406,1.563 0.313,0.198 10 false x2 6.542,3.865 6.854,4.063 0.313,0.198 10 false x3 1.75,2.906 2.063,3.104 0.313,0.198 10 false x4 0.927,2.688 1.24,2.885 0.313,0.198 10 false x2 4.302,0.771 4.615,0.969 0.313,0.198 10 false x3

Procedure Part Name Code
Z101186

Z101188

Z101187

1 SPARK PLUG 19100P (Click here) - -
2 KNOCK SENSOR 89615 (Click here) - -
3 OIL PRESSURE AND TEMPERATURE SENSOR 89448D (Click here) - -
4 CAMSHAFT POSITION SENSOR (for Intake Side) 11102A (Click here) - -
5 CAMSHAFT POSITION SENSOR (for Exhaust Side) 11102A (Click here) - -
6 CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side) 15370 (Click here) - -
7 CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side) 15370 (Click here) - -
8 WATER INLET WITH THERMOSTAT SUB-ASSEMBLY 16031 (Click here) - -
9 ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING) 16032 (Click here) - -
10 OIL FILLER CAP ASSEMBLY 12180E - - -
11 OIL FILLER CAP GASKET 12108A - - -
12 CRANKSHAFT POSITION SENSOR 11401G (Click here) - -
13 PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 12204C - - -
14 VACUUM PUMP ASSEMBLY 29300 (Click here) - -

● Non-reusable part ★ Precoated part

A459759N01
0.5,3.5 0.5,3.333 0.5,3.333 0.844,2.906 false 1.167,3.833 1.167,3.667 1.167,3.667 1.469,3.031 false 1.25,1.417 1.417,1.167 1.417,1.167 1.583,1.167 false 2.5,1.635 2.719,1.26 2.719,1.26 2.885,1.26 false 5.313,0.75 5.646,0.75 false 5.781,1.479 6.031,1.479 false 3.115,3.802 3.167,3.5 3.167,3.5 3.333,3.5 false 5.99,4 6.167,3.667 6.167,3.667 6.333,3.667 false 6.167,4.667 6.281,4.875 6.281,4.875 6.281,5.042 false 2.708,4.26 2.708,4.594 false 3.229,4.208 3.229,4.625 false 5.51,2.469 5.927,2.469 false 4.917,2.667 5.333,2.667 false 4.625,1.677 5.042,1.677 false 5.625,3.885 5.76,3.427 5.76,3.427 5.927,3.427 false 5.854,4.844 5.854,4.51 false 5.042,0.396 5.458,0.396 false 6.5,0.208 6.833,0.208 false 0.531,3.49 1.083,3.844 0.552,0.354 18 false 15 6.313,5.083 6.865,5.438 0.552,0.354 18 false 16 6.667,3.542 7.104,3.948 0.438,0.406 18 false 17 6.385,1.313 6.823,1.719 0.438,0.406 18 false 18 6.188,0.635 6.625,1.042 0.438,0.406 18 false 19 1.656,1.021 2.094,1.427 0.438,0.406 18 false 20 3.281,1.115 3.719,1.521 0.438,0.406 18 false 21 1.354,3.865 1.792,4.271 0.438,0.406 18 false 22 3.365,3.344 3.802,3.75 0.438,0.406 18 false 23 6.156,0.073 6.604,0.458 0.448,0.385 18 false 24 2.677,4.635 3.115,5.042 0.438,0.406 10 false ● 3.208,4.646 3.521,4.969 0.313,0.323 10 false ● 1.198,3.906 1.635,4.313 0.438,0.406 10 false ● 6.052,0.677 6.49,1.083 0.438,0.406 10 false ● 5.979,2.365 6.25,2.615 0.271,0.25 10 false ● 5.396,2.583 5.833,2.99 0.438,0.406 10 false ● 5.094,1.583 5.531,1.99 0.438,0.406 10 false ● 5.979,3.344 6.25,3.594 0.271,0.25 10 false ● 5.823,4.865 6.26,5.271 0.438,0.406 10 false ● 5.51,0.292 5.948,0.698 0.438,0.406 10 false ●★ 6.542,4.219 6.813,4.469 0.271,0.25 10 false x2 1.594,2.135 1.865,2.385 0.271,0.25 10 false x17 0.688,0.885 0.958,1.135 0.271,0.25 10 false x3 5.01,0.469 5.281,0.719 0.271,0.25 10 false x2 4.229,0.51 4.5,0.76 0.271,0.25 10 false x11 4.854,2.667 5.125,2.917 0.271,0.25 10 false x4 6.625,4.667 6.896,4.917 0.271,0.25 10 false x2 5.323,0.781 5.594,1.031 0.271,0.25 10 false x3

Procedure Part Name Code
Z101186

Z101188

Z101187

15 CRANKSHAFT PULLEY ASSEMBLY 13470 (Click here) - -
16 OUTLET WATER SUB-ASSEMBLY 16304 (Click here) - -
17 OUTLET WATER BY-PASS SUB-ASSEMBLY 16305E (Click here) - -
18 CYLINDER HEAD COVER SUB-ASSEMBLY 11201 (Click here) - -
19 SPARK PLUG TUBE GASKET 11193 (Click here) - -
20 ENGINE MOUNTING BRACKET RH 12315A - - -
21 NO. 2 TIMING CHAIN COVER ASSEMBLY 11320B (Click here) - -
22 TIMING CHAIN COVER OIL SEAL 11301C (Click here) - -
23 OIL PUMP DRIVE GEAR 13519 - - -
24 SET NO. 1 CYLINDER TO TDC (COMPRESSION) - (Click here) - -

● Non-reusable part ★ Precoated part

A475596N02
2.76,0.385 3.198,0.906 0.438,0.521 2.521,1.073 3.073,1.594 0.552,0.521 0.677,1.281 0.844,1.281 false 1.167,3.333 1.167,3.167 1.167,3.167 1.417,3 false 1.594,3.583 1.594,3.417 1.594,3.417 1.948,3.25 false 3.271,1.427 3.385,1.135 3.385,1.135 3.552,1.135 false 2.229,2.896 2.229,2.646 false 0.417,3.167 0.417,3 0.417,3 0.771,2.833 false 1.813,0.875 2.063,0.875 false 3.073,5.063 3.073,4.896 3.073,4.896 3.667,4.417 false 6.313,0.208 6.479,0.208 6.479,0.208 6.667,0.833 false 6,3 6.25,3 false 4.76,1.458 6.094,1.458 false 5,1.448 5,1 false 5.5,1.458 5.5,1.167 false 5.75,1.458 5.75,1.333 false 2,4.781 2,4.615 2,4.615 2.5,4.313 false 5.604,2.281 5.917,2.5 5.917,2.5 6.083,2.5 false 6.031,2.052 6.281,2.052 false 3.781,3.75 3.99,3.01 3.99,3.01 4.156,3.01 false 0.396,1.156 0.948,1.51 0.552,0.354 18 false 25 1.063,3.333 1.615,3.688 0.552,0.354 18 false 26 1.479,3.583 2.031,3.938 0.552,0.354 18 false 27 3.646,0.99 4.198,1.344 0.552,0.354 18 false 28 2.125,2.896 2.677,3.25 0.552,0.354 18 false 29 0.313,3.167 0.865,3.521 0.552,0.354 18 false 30 2.479,0.75 3.031,1.104 0.552,0.354 18 false 31 2.031,4.813 2.583,5.167 0.552,0.354 18 false 32 4.198,2.885 4.75,3.24 0.552,0.354 18 false 33 3.104,5.125 3.656,5.479 0.552,0.354 18 false 34 5.99,0.094 6.385,0.448 0.396,0.354 18 false 35 6.604,2.865 7,3.219 0.396,0.354 18 false 36 4.438,1.323 4.833,1.677 0.396,0.354 18 false 37 6.156,2.375 6.552,2.729 0.396,0.354 18 false 38 0.417,1.917 0.729,2.115 0.313,0.198 10 false x2 3.771,4.302 4.083,4.5 0.313,0.198 10 false x2 3.188,1.948 3.5,2.146 0.313,0.198 10 false x8 2.188,3.885 2.5,4.083 0.313,0.198 10 false x12 5.406,0.417 5.646,0.667 0.24,0.25 10 false x7 5.094,2.25 5.333,2.5 0.24,0.25 10 false x2 4.656,1.927 4.896,2.177 0.24,0.25 10 false x12 1.063,0.354 1.302,0.604 0.24,0.25 10 false x3 6.885,0.479 7.125,0.729 0.24,0.25 10 false x2 6.333,1.917 6.729,2.271 0.396,0.354 18 false 39 2.792,0.396 3.167,0.635 0.375,0.24 12 false *B 2.542,1.083 2.917,1.323 0.375,0.24 12 false *A 3.031,0.594 3.344,0.792 0.313,0.198 10 false x2

Procedure Part Name Code
Z101186

Z101188

Z101187

25 CAMSHAFT TIMING GEAR ASSEMBLY 13050 (Click here) - -
26 CHAIN SUB-ASSEMBLY 13506 - - -
27 CRANKSHAFT TIMING GEAR OR SPROCKET 13521 - - -
28 NO. 1 CHAIN TENSIONER ASSEMBLY 13540 - - -
29 CHAIN TENSIONER SLIPPER 13559 - - -
30 NO. 1 CHAIN VIBRATION DAMPER 13561 - - -
31 CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY 13070A (Click here) - -
32 TIMING CHAIN COVER ASSEMBLY 11310 (Click here) - -
33 BALANCESHAFT DRIVE GEAR 13631 - - -
34 CRANKSHAFT TIMING GEAR KEY 13471A (Click here) - -
35 FUEL PUMP LIFTER GUIDE 23477 (Click here) - -
36 CAMSHAFT HOUSING SUB-ASSEMBLY 11103 (Click here) - -
37 CAMSHAFT BEARING CAP - (Click here) - -
38 INTAKE CAMSHAFT SUB-ASSEMBLY 13501A - - -
39 EXHAUST CAMSHAFT SUB-ASSEMBLY 13502B - - -

*A w/ Stud Bolt *B w/o Stud Bolt

A459761N01
3.49,4.74 4.073,4.74 false 4.5,2.75 5.333,2.75 false 4.01,3.719 4.26,3.719 false 5.115,0.948 5.417,1.167 5.417,1.167 5.583,1.167 false 4.646,1.021 4.896,1.021 false 5.198,0.698 5.531,0.698 false 5.573,0.563 6.125,0.917 0.552,0.354 18 false 40 4.313,0.885 4.865,1.24 0.552,0.354 18 false 41 5.646,1.021 6.198,1.375 0.552,0.354 18 false 42 5.781,2.635 6.333,2.99 0.552,0.354 18 false 43 4.542,3.583 5.094,3.938 0.552,0.354 18 false 44 4.333,3.646 4.885,4 0.552,0.354 10 false ● 4.448,4.604 5,4.958 0.552,0.354 18 false 45 4.979,1.042 5.531,1.396 0.552,0.354 10 false x12 5.177,0.833 5.729,1.188 0.552,0.354 10 false x12 5.229,0.521 5.781,0.875 0.552,0.354 10 false x12 3.365,0.563 3.917,0.917 0.552,0.354 10 false x4 2.906,0.583 3.458,0.938 0.552,0.354 10 false x4

Procedure Part Name Code
Z101186

Z101188

Z101187

40 NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY 13801 - - -
41 VALVE LASH ADJUSTER ASSEMBLY 13750 - - -
42 VALVE STEM CAP 13716 - - -
43 CYLINDER HEAD SUB-ASSEMBLY 11101 (Click here) - -
44 CYLINDER HEAD GASKET 11115 - - -
45 CYLINDER BLOCK WATER JACKET SPACER 11445 (Click here) - -

● Non-reusable part - -

A459762N03
1.167,4.083 1.167,3.917 1.167,3.917 1.083,3.813 false 2,4.083 2,3.917 2,3.917 1.917,3.667 false 6,4.552 6,4.385 6,4.385 5.844,4.271 false 2.292,1.865 2.542,1.865 false 3.667,3.583 3.75,3.948 3.75,3.948 3.917,3.948 false 4.979,1 5.396,1 false 4.708,1.521 5.042,1.521 false 5.01,2.385 5.26,2.385 false 3.917,4.5 4.417,4.5 false 3.688,5.333 4.104,5.333 false 3.208,5.125 3.625,5.125 false 3.083,3.5 3.083,3.333 3.083,3.333 3.656,3.229 false 6.24,4.083 6.49,4.083 false 1.229,4.135 1.781,4.49 0.552,0.354 18 false 46 2.083,4.146 2.635,4.5 0.552,0.354 18 false 47 4.167,5.208 4.719,5.563 0.552,0.354 18 false 48 4.771,4.333 5.323,4.688 0.552,0.354 18 false 49 4.302,3.833 4.854,4.188 0.552,0.354 18 false 50 6.073,4.552 6.625,4.906 0.552,0.354 18 false 51 5.719,2.271 6.271,2.625 0.552,0.354 18 false 52 5.448,0.844 6,1.198 0.552,0.354 18 false 53 5.104,1.385 5.656,1.74 0.552,0.354 18 false 54 3.031,5.01 3.333,5.281 0.302,0.271 10 false ● 3.052,3.521 3.354,3.792 0.302,0.271 10 false ● 6.552,3.969 6.854,4.24 0.302,0.271 10 false ● 2.844,4.604 3.146,4.875 0.302,0.271 10 false x2 4.052,4.979 4.354,5.25 0.302,0.271 10 false x9 5.427,4.531 5.729,4.802 0.302,0.271 10 false x2 3.635,0.26 3.938,0.531 0.302,0.271 10 false x4 4.833,0.375 5.135,0.646 0.302,0.271 10 false x5 3.052,2.771 3.354,3.042 0.302,0.271 10 false x4 4.531,3.406 4.833,3.677 0.302,0.271 10 false x2 1.958,1.708 2.51,2.063 0.552,0.354 18 false 55

Procedure Part Name Code
Z101186

Z101188

Z101187

46 OIL FILTER SUB-ASSEMBLY 15601 (Click here) - -
47 OIL FILTER UNION 15600A (Click here) - -
48 OIL PAN DRAIN PLUG 12101A - - -
49 OIL PAN SUB-ASSEMBLY 12101 (Click here) - -
50 OIL STRAINER SUB-ASSEMBLY 15104 (Click here) - -
51 ENGINE OIL LEVEL SENSOR 89491 (Click here) - -
52 STIFFENING CRANKCASE ASSEMBLY 11420 (Click here) - -
53 NO. 1 OIL PAN BAFFLE PLATE 12121 - - -
54 ENGINE BALANCER ASSEMBLY 13620B - - -
55 STRAIGHT SCREW PLUG - (Click here) - -

● Non-reusable part - -

A459772N03
2.125,1.625 2.552,1.99 0.427,0.365 4.729,5.302 5.146,5.302 false 3.635,4.813 3.802,4.813 3.802,4.813 3.875,4.51 false 1.75,3.042 1.75,3.625 false 1.917,2.031 1.917,2.417 false 2.917,1.167 2.75,1.167 2.75,1.167 2.313,1.906 false 6.24,3.292 6.656,3.292 false 5.01,0.531 5.177,0.531 5.177,0.531 5.833,0.229 false 6.125,5.438 6.292,5.438 6.292,5.438 6.677,5.146 false 4.667,0.365 5.219,0.719 0.552,0.354 18 false 57 1.979,2.448 2.531,2.802 0.552,0.354 18 false 56 1.948,3.615 2.5,3.969 0.552,0.354 18 false 58 5.792,5.313 6.344,5.667 0.552,0.354 18 false 59 5.625,5.385 5.885,5.646 0.26,0.26 10 false ● 3.146,4.76 3.406,5.021 0.26,0.26 10 false ● 1.771,3.698 2.031,3.958 0.26,0.26 10 false ● 4.521,0.406 4.781,0.667 0.26,0.26 10 false ● 3.938,4.531 4.198,4.792 0.26,0.26 10 false x6 1.813,2.958 2.073,3.219 0.26,0.26 10 false x2 5.927,0.156 6.188,0.417 0.26,0.26 10 false x8 3.26,1 3.813,1.354 0.552,0.354 18 false 56 5.833,3.146 6.385,3.5 0.552,0.354 18 false 56 4.385,5.146 4.938,5.5 0.552,0.354 18 false 56 3.323,4.688 3.875,5.042 0.552,0.354 18 false 57 2.156,1.625 2.531,1.865 0.375,0.24 12 false *A 5.208,5.281 5.469,5.542 0.26,0.26 10 false x2

Procedure Part Name Code
Z101186

Z101188

Z101187

56 STUD BOLT - (Click here) - -
57 RING PIN - (Click here) - -
58 STRAIGHT PIN - (Click here) - -
59 REAR ENGINE OIL SEAL 11401L - - -

*A w/ Stud Bolt - -
● Non-reusable part - -

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 19100P 1.REMOVE SPARK PLUG

Z101186

Click here(Click here)

Hide 89615 2.REMOVE KNOCK SENSOR

Z101186

Click here(Click here)

Hide 89448D 3.REMOVE OIL PRESSURE AND TEMPERATURE SENSOR

Z101186

Click here(Click here)

Hide 11102A 4.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

Z101186

Click here(Click here)

Hide 11102A 5.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

Z101186

Click here(Click here)

Hide 15370 6.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)

Z101186

Click here(Click here)

Hide 15370 7.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side)

Z101186

Click here(Click here)

Hide 16031 8.REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

Z101186

Click here(Click here)

Hide 16032 9.REMOVE ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING)

Z101186

Click here(Click here)

Hide 12180E 10.REMOVE OIL FILLER CAP ASSEMBLY

a.
A459956


Hide 12108A 11.REMOVE OIL FILLER CAP GASKET

a.
A460875


Hide 11401G 12.REMOVE CRANKSHAFT POSITION SENSOR

Z101186

Click here(Click here)

Hide 12204C 13.REMOVE PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

Hide 29300 14.REMOVE VACUUM PUMP ASSEMBLY

Z101186

Click here(Click here)

Hide 13470 15.REMOVE CRANKSHAFT PULLEY ASSEMBLY

a.
A459957C02
2.167,0.833 2.667,0.594 false 2.167,0.833 3.031,0.885 false 4.563,3.271 4.75,3.333 4.75,3.333 4.833,3.333 false 4.917,2.417 5,2.417 5,2.417 5.073,2.792 false 1.885,0.771 2.344,0.969 0.458,0.198 10 false SST 2,0.083 2.458,0.281 0.458,0.198 10 false *a 4.271,1.563 4.729,1.76 0.458,0.198 10 false *b 2.271,3.531 2.729,3.729 0.458,0.198 10 false *b 1.646,2.677 2.104,2.875 0.458,0.198 10 false *a 4.875,3.26 5.333,3.458 0.458,0.198 10 false SST 4.75,2.365 5.208,2.563 0.458,0.198 10 false *1 1.792,0.219 2.25,0.417 0.458,0.198 18 false i 1.792,2.052 2.25,2.25 0.458,0.198 18 false ii
*1 Crankshaft Pulley Set Bolt - -
*a Hold *b Turn


i.

Using SST, hold the crankshaft pulley assembly and loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.

SST
09213-54015  
09330-00021  


ii.

Using SST and the crankshaft pulley set bolt, remove the crankshaft pulley assembly and crankshaft pulley set bolt.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05070, 09957-04010)

HINT:

Apply lubricant to the threads and end of SST.




Hide 16304 16.REMOVE OUTLET WATER SUB-ASSEMBLY

a.
A459958N01
0.5,0.094 0.781,0.448 0.281,0.354 18 false i

i.

Using an 8 mm socket wrench, remove the 2 bolts, outlet water sub-aseembly and water outlet gasket from the cylinder head sub-assembly.



Hide 16305E 17.REMOVE OUTLET WATER BY-PASS SUB-ASSEMBLY

a.
A459959N01
0.438,0.094 0.719,0.448 0.281,0.354 18 false i

i.

Using an 8 mm socket wrench, remove the 2 bolts, outlet water by-pass sub-assembly and outlet water pipe gasket from the cylinder head sub-assembly.



Hide 11201 18.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

a.
A459994N01
3.917,0.25 4.469,0.604 0.552,0.354 18 false ii 1.792,2.01 2.344,2.365 0.552,0.354 18 false iii 0.563,0.146 1.115,0.5 0.552,0.354 18 false i

i.

Using an 8 mm socket wrench, remove the 13 bolts and cylinder head cover sub-assembly from the camshaft housing sub-assembly.


ii.

Remove the 5 cylinder head cover gaskets from the cylinder head cover sub-assembly.


iii.

Remove the camshaft bearing cap oil hole gasket from the No. 1 camshaft bearing cap.



Hide 11193 19.REMOVE SPARK PLUG TUBE GASKET

a.
A459960N01
0.521,0.063 0.802,0.417 0.281,0.354 18 false i

i.

Using a screwdriver, pry out the 3 spark plug tube gaskets from the cylinder head cover sub-assembly.

NOTICE:

Be careful not to damage the cylinder head cover sub-assembly.


HINT:

Tape the screwdriver tip before use.




Hide 12315A 20.REMOVE ENGINE MOUNTING BRACKET RH

a.
A459961


Hide 11320B 21.REMOVE NO. 2 TIMING CHAIN COVER ASSEMBLY

Z101186

Click here(Click here)

Hide 11301C 22.REMOVE TIMING CHAIN COVER OIL SEAL

Z101186

Click here(Click here)

Hide 13519 23.REMOVE OIL PUMP DRIVE GEAR

a.
A461135


Hide 24.SET NO. 1 CYLINDER TO TDC (COMPRESSION)

a.
A478787C02
3.729,5.052 4.885,4.635 true 0.417,2.833 1.406,2.125 true 0.417,2.833 1.354,2.479 true 6.75,3 5.615,2.104 true 6.75,3 5.667,2.552 true 1.052,0.271 1.365,0.469 0.313,0.198 10 false *a 5.521,0.188 5.833,0.385 0.313,0.198 10 false *b 4.031,5.5 4.25,5.656 0.219,0.156 10 true *c 4.927,4.531 5.24,4.729 0.313,0.198 10 false *d 0.219,2.792 0.479,3 0.26,0.208 10 false *d 6.792,2.938 7.052,3.125 0.26,0.188 10 true *d 4.896,4.948 5.427,5.281 0.531,0.333 18 false ii 2.031,0.167 2.563,0.5 0.531,0.333 18 false iii 6.313,0.177 6.844,0.51 0.531,0.333 18 false iii 4.135,3.01 4.573,3.313 0.438,0.302 18 true i, iv
*a Approximately 45.32° *b Approximately 16.89°
*c Approximately 95° *d Timing Mark


i.

Temporarily install the crankshaft pulley bolt.


ii.

Rotate the crankshaft clockwise and align the crankshaft timing gear key as shown in the illustration.


iii.

Check that the timing marks on the camshaft timing exhaust gear assembly and camshaft timing gear assembly are as shown in the illustration.


iv.

Remove the crankshaft pulley bolt.

HINT:

As the exhaust camshaft sub-assembly may rotate counterclockwise strongly when the crankshaft pulley bolt is removed, use a wrench to hold the hexagonal portion of the exhaust camshaft sub-assembly.




Hide 13050 25.REMOVE CAMSHAFT TIMING GEAR ASSEMBLY

a.
A459995C01
1.917,1.052 2.5,0.667 2.5,0.667 2.667,0.667 true 5.583,0.667 6,0.198 6,0.198 6.167,0.198 true 2.771,0.583 3.083,0.781 0.313,0.198 10 false *a 6.219,0.115 6.531,0.313 0.313,0.198 10 true *b 4.271,2.167 4.583,2.365 0.313,0.198 10 false *c 0.542,0.073 0.823,0.427 0.281,0.354 18 false i 3.729,0.052 4.01,0.406 0.281,0.354 18 false ii 4.885,2.042 5.167,2.396 0.281,0.354 18 false iii 2.146,2.75 2.427,3.104 0.281,0.354 18 false iv
*a Loosen *b Hexagon Wrench
*c Hold - -
V113147

Turn - -


i.

Hold the hexagonal portion of the exhaust camshaft sub-assembly with a wrench and turn the camshaft timing gear assembly clockwise to loosen the chain sub-assembly between the camshaft timing exhaust gear assembly and camshaft timing gear assembly.


ii.

Push the plunger all the way in then insert the 1.5 mm hexagon wrench into the No. 1 chain tensioner assembly hole.


iii.

Using a wrench, hold the hexagonal portion of the intake camshaft sub-assembly.

NOTICE:
·

Be careful not to damage the camshaft housing sub-assembly, cylinder head sub-assembly and spark plug tube with the wrench.

·

Do not disassemble the camshaft timing gear assembly.




iv.

Remove the bolt and camshaft timing gear assembly from the intake camshaft sub-assembly



Hide 13506 26.REMOVE CHAIN SUB-ASSEMBLY

a.
A459963


Hide 13521 27.REMOVE CRANKSHAFT TIMING GEAR OR SPROCKET

a.
A461066


Hide 13540 28.REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY

a.
A459964C01
0.146,0.01 0.521,0.25 0.375,0.24 12 false *A 3.99,0.021 4.365,0.26 0.375,0.24 12 false *B
*A w/ Stud Bolt *B w/o Stud Bolt



Hide 13559 29.REMOVE CHAIN TENSIONER SLIPPER

a.
A459965


Hide 13561 30.REMOVE NO. 1 CHAIN VIBRATION DAMPER

a.
A459966


Hide 13070A 31.REMOVE CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY

a.
A459987C01
4.333,1.417 4.333,1.167 false 4.833,1.406 4.833,1.156 false 0.74,0.052 1.021,0.406 0.281,0.354 18 false i 0.688,1.052 0.969,1.406 0.281,0.354 18 false ii 4.448,0.083 4.729,0.438 0.281,0.354 18 false iii 4.781,1.448 5.094,1.646 0.313,0.198 10 false *1 4.25,1.458 4.563,1.656 0.313,0.198 10 false *2
*1 Camshaft Timing Exhaust Gear Assembly *2 Camshaft Timing Oil Control Valve Assembly (Exhaust Camshaft Timing Gear Bolt Assembly)


i.

Using a wrench, hold the hexagonal portion of the exhaust camshaft sub-assembly.

NOTICE:

Be careful not to damage the camshaft housing sub-assembly, cylinder head sub-assembly or spark plug tube with the wrench.



ii.

Using a 5 mm hexagon socket wrench, remove the 3 bolts.


iii.

Remove the camshaft timing exhaust gear assembly and camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly) from the exhaust camshaft sub-assembly.



Hide 11310 32.REMOVE TIMING CHAIN COVER ASSEMBLY

a.
A460876


b.
A458841N01
0.531,0.104 0.813,0.458 0.281,0.354 18 false i

i.

Remove the timing chain cover assembly by prying between the cylinder head sub-assembly, camshaft housing sub-assembly, cylinder block sub-assembly and stiffening crankcase assembly with a screwdriver with its tip wrapped with protective tape.

NOTICE:

Be careful not to damage the contact surfaces of the cylinder head sub-assembly, camshaft housing sub-assembly, cylinder block sub-assembly, stiffening crankcase assembly and timing chain cover assembly.




Hide 13631 33.REMOVE BALANCESHAFT DRIVE GEAR

a.
A461153


Hide 13471A 34.REMOVE CRANKSHAFT TIMING GEAR KEY

a.
A459968N01
0.5,0.073 0.781,0.427 0.281,0.354 18 false i

i.

Using a screwdriver, remove the 2 crankshaft timing gear keys from the crankshaft.

HINT:

Tape the screwdriver tip before use.




Hide 23477 35.REMOVE FUEL PUMP LIFTER GUIDE

a.
A459969N01
0.469,0.083 0.75,0.438 0.281,0.354 18 false i

i.

Using an 8 mm socket wrench, remove the 2 bolts and fuel pump lifter guide from the No. 4 camshaft bearing cap.



Hide 11103 36.REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY

a.
A459988N01
1.021,0.094 1.177,0.292 0.156,0.198 10 false 1 1,1.458 1.156,1.656 0.156,0.198 10 false 2 0.833,0.792 0.99,0.99 0.156,0.198 10 true 3 2.865,0.177 3.021,0.375 0.156,0.198 10 false 4 2.917,0.781 3.073,0.979 0.156,0.198 10 false 5 2.24,0.115 2.396,0.313 0.156,0.198 10 false 6 2.75,1.448 2.906,1.646 0.156,0.198 10 true 7 2.167,1.052 2.323,1.25 0.156,0.198 10 true 8 2.042,0.094 2.198,0.292 0.156,0.198 10 false 9 2.01,1.51 2.25,1.708 0.24,0.198 10 true 10 1.698,1.073 1.917,1.271 0.219,0.198 10 true 11 1.615,0.042 1.833,0.229 0.219,0.188 10 true 12 1.583,1.521 1.823,1.698 0.24,0.177 10 true 13 1.323,1.083 1.531,1.26 0.208,0.177 10 true 14 0.49,0.115 0.865,0.448 0.375,0.333 18 false i 4.094,0.125 4.469,0.458 0.375,0.333 18 false ii

i.

Uniformly loosen and remove the 14 bolts in the order shown in the illustration.


ii.

Remove the camshaft housing sub-assembly by prying between the cylinder head sub-assembly and camshaft housing sub-assembly with a screwdriver.

NOTICE:

Be careful not to damage the contact surfaces of the cylinder head sub-assembly and camshaft housing sub-assembly.


HINT:

Tape the screwdriver tip before use.




Hide 37.REMOVE CAMSHAFT BEARING CAP

a.
A459970C01
2.542,1.469 2.854,1.219 false 3.313,1.563 3.313,1.313 false 3.719,1.563 3.719,1.313 false 4.302,0.885 4.635,1.063 false 2.396,1.479 2.708,1.677 0.313,0.198 10 false *1 3.229,1.583 3.542,1.781 0.313,0.198 10 false *2 3.646,1.583 3.958,1.781 0.313,0.198 10 false *3 4.688,1.01 5,1.208 0.313,0.198 10 false *4 2.646,1.083 2.927,1.24 0.281,0.156 10 false 1 3.865,1.427 4.021,1.615 0.156,0.188 10 true 2 3.031,0.417 3.188,0.604 0.156,0.188 10 true 4 3.906,0.573 4.063,0.76 0.156,0.188 10 true 3 3.073,1.135 3.229,1.323 0.156,0.188 10 true 5 3.531,0.365 3.688,0.552 0.156,0.188 10 true 6 3.5,1.135 3.656,1.323 0.156,0.188 10 true 7 0.448,0.104 1.823,0.458 1.375,0.354 18 false i, ii
*1 No. 1 Camshaft Bearing Cap *2 No. 2 Camshaft Bearing Cap
*3 No. 3 Camshaft Bearing Cap *4 No. 4 Camshaft Bearing Cap


i.

Remove the 7 bolts in the order shown in the illustration.


ii.

Remove the No. 1 camshaft bearing cap, No. 2 camshaft bearing cap, 2 No. 3 camshaft bearing caps and No. 4 camshaft bearing cap from the camshaft housing sub-assembly.

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.




Hide 13501A 38.REMOVE INTAKE CAMSHAFT SUB-ASSEMBLY

a.
A459971


Hide 13502B 39.REMOVE EXHAUST CAMSHAFT SUB-ASSEMBLY

a.
A459972


Hide 13801 40.REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

a.
A459973


Hide 13750 41.REMOVE VALVE LASH ADJUSTER ASSEMBLY

a.
A459974


Hide 13716 42.REMOVE VALVE STEM CAP

a.
A459975


Hide 11101 43.REMOVE CYLINDER HEAD SUB-ASSEMBLY

Z101186

NOTICE:
·

Be careful not to drop the plate washers into the cylinder head sub-assembly.

·

Warpage or cracking of the cylinder head sub-assembly may result from removing the cylinder head set bolts in the incorrect order.




a.
A459976C01
2.688,1.354 2.844,1.552 0.156,0.198 10 true 2 2.667,0.375 2.823,0.573 0.156,0.198 10 false 3 4.365,1.365 4.521,1.563 0.156,0.198 10 true 4 3.302,0.208 3.458,0.406 0.156,0.198 10 true 5 3.719,1.448 3.875,1.646 0.156,0.198 10 true 6 3.708,0.188 3.865,0.385 0.156,0.198 10 true 7 3.292,1.448 3.448,1.646 0.156,0.198 10 true 8 4.344,0.26 4.5,0.458 0.156,0.198 10 true 1 0.531,0.094 0.813,0.448 0.281,0.354 18 false i
V100136

Front of Engine - -


i.

Using a 12 mm socket wrench, uniformly loosen the 8 cylinder head set bolts in the order shown in the illustration. Remove the 8 cylinder head set bolts and 8 plate washers.



Hide 11445 45.REMOVE CYLINDER BLOCK WATER JACKET SPACER

Z101186

NOTICE:

Be sure to remove the cylinder block water jacket spacer. If it is not removed, it may fall and become damaged when the cylinder block sub-assembly is inverted.



a.
A459977


Hide 15601 46.REMOVE OIL FILTER SUB-ASSEMBLY

Hide 15600A 47.REMOVE OIL FILTER UNION

a.
A459978N01
0.458,0.083 0.74,0.438 0.281,0.354 18 false i

i.

Using a 12 mm hexagon socket wrench, remove the oil filter union from the stiffening crankcase assembly.



Hide 12101A 48.REMOVE OIL PAN DRAIN PLUG

a.
A461029


Hide 12101 49.REMOVE OIL PAN SUB-ASSEMBLY

a.
A460996C01
2.208,1.615 2.458,1.781 0.25,0.167 10 false *a 1.5,1.531 1.75,1.698 0.25,0.167 10 false *a 0.438,0.052 0.719,0.406 0.281,0.354 18 false i 3.969,0.083 4.25,0.438 0.281,0.354 18 false ii
*a Nut - -


i.

Remove the 9 bolts and 2 nuts.


ii.

Insert the blade of an oil pan seal cutter between the oil pan sub-assembly and stiffening crankcase assembly, cut through the applied sealer and remove the oil pan sub-assembly.

NOTICE:
·

Be careful not to damage the contact surfaces of the stiffening crankcase assembly and oil pan sub-assembly.

·

Be careful not to damage the oil pan sub-assembly flange.





Hide 15104 50.REMOVE OIL STRAINER SUB-ASSEMBLY

a.
A459980N01
0.5,0.063 0.781,0.417 0.281,0.354 18 false i

i.

Using an 8 mm socket wrench, remove the bolt, oil strainer sub-assembly and oil strainer gasket from the stiffening crankcase assembly.



Hide 89491 51.REMOVE ENGINE OIL LEVEL SENSOR

Z101186

Click here(Click here)

Hide 11420 52.REMOVE STIFFENING CRANKCASE ASSEMBLY

a.
A460854N01
0.813,0.052 1.094,0.406 0.281,0.354 18 false i 3.917,0.083 4.198,0.438 0.281,0.354 18 false ii

i.

Remove the 8 bolts.


ii.

Using a screwdriver, remove the stiffening crankcase assembly by prying between the stiffening crankcase assembly and cylinder block sub-assembly at the places shown in the illustration.

NOTICE:

Be careful not to damage the contact surfaces of the cylinder block sub-assembly and stiffening crankcase assembly.


HINT:

Tape the screwdriver tip before use.




Hide 12121 53.REMOVE NO. 1 OIL PAN BAFFLE PLATE

a.
A459984


Hide 13620B 54.REMOVE ENGINE BALANCER ASSEMBLY

a.
A459983


Hide 55.REMOVE STRAIGHT SCREW PLUG

a.
A459774N02
0.49,0.083 0.771,0.438 0.281,0.354 18 false i

i.

Using a 10 mm hexagon socket wrench, remove the straight screw plug from the stiffening crankcase assembly.



Hide 56.REMOVE STUD BOLT

Z101186

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.



a.
A461545C01
0.552,0.156 0.833,0.51 0.281,0.354 18 false i 4.083,0.135 4.365,0.49 0.281,0.354 18 false ii 0.552,1.854 0.833,2.208 0.281,0.354 18 false iii 4.083,1.844 4.365,2.198 0.281,0.354 18 false iv 4.635,0.146 5.01,0.385 0.375,0.24 12 false *A
*A w/ Stud Bolt - -


i.

Using an E8 "TORX" socket wrench, remove the stud bolt shown in the illustration from the cylinder head sub-assembly.


ii.

Using an E6 "TORX" socket wrench, remove the stud bolt shown in the illustration from the timing chain cover assembly.


iii.

Using an E6 "TORX" socket wrench, remove the stud bolt shown in the illustration from the stiffening crankcase assembly.


iv.

Using an E8 "TORX" socket wrench, remove the stud bolt shown in the illustration from the timing chain cover assembly.



Hide 57.REMOVE RING PIN

Z101186

NOTICE:

It is not necessary to remove the ring pins unless they are being replaced.



a.
A461006


Hide 58.REMOVE STRAIGHT PIN

Z101186

NOTICE:

It is not necessary to remove the straight pins unless they are being replaced.



a.
A459982


Hide 11401L 59.REMOVE REAR ENGINE OIL SEAL

a.
A459981