Intuitive Parking Assist System
Symptom
| Suspected Area
| See page
|
System does not operate at all (Initial check function also does not operate)
| Proceed to "Clearance sonar main switch circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Clearance warning indicator indicates that front clearance sonar sensor LH and/or RH are frozen
| Clear the sensors surface
|
Click here
|
Proceed to "Front Clearance Sonar Sensor LH Circuit"
|
Click here
|
Proceed to "Front Clearance Sonar Sensor RH Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Clearance warning indicator indicates rear clearance sonar sensor is frozen
| Clean the sensor surface
|
Click here
|
Proceed to "Rear Clearance Sonar Sensor LH Circuit"
|
Click here
|
Proceed to "Rear Clearance Sonar Sensor RH Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Clearance warning indicator indicates back sonar sensor is frozen
| Clean the sensor surface
|
Click here
|
Proceed to "Back Sonar Sensor LH Circuit"
|
Click here
|
Proceed to "Back Sonar Sensor RH Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Clearance warning indicator indicates open in front clearance sonar sensor LH and/or RH
| Clean the sensor surface
|
Click here
|
Front Clearance Sonar Sensor LH Circuit
|
Click here
|
Front Clearance Sonar Sensor RH Circuit
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Clearance warning indicator indicates open in rear clearance sonar sensor circuit
| Initial check function
|
Click here
|
Proceed to "Rear Clearance Sonar Sensor LH Circuit"
|
Click here
|
Proceed to "Back Sonar Sensor LH Circuit"
|
Click here
|
Proceed to "Back Sonar Sensor RH Circuit"
|
Click here
|
Proceed to "Rear Clearance Sonar Sensor RH Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Clearance sonar sensors operate when shift lever is not in R, or do not operate even when shift lever is in R
| Proceed to "Park/Neutral Position Switch Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
System operates even when vehicle speed is 10 km/h (6.2 mph) or more
| Proceed to "Speed Signal Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Indicator does not dim at night, or illuminates dimly during daytime
| Proceed to "Taillight Relay Circuit"
|
Click here
|
Proceed to "Clearance Sonar Main Switch Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Detection operation is normal but clearance warning indicator does not illuminate
| Proceed to "Indicator Circuit"
|
Click here
|
Combination meter assembly
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
Detection operation is normal but clearance sonar main switch indicator does not illuminate
| Inspect back sonar or clearance sonar switch assembly
|
Click here
|
Proceed to "Indicator Circuit"
|
Click here
|
Clearance warning ECU assembly
|
Click here
|
System operates but clearance warning buzzer does not sound
| Proceed to "Clearance Warning Buzzer Circuit"
|
Click here
|
Replace clearance warning ECU assembly
|
Click here
|
Clearance warning buzzer volume is low
| Clearance warning ECU assembly
|
Click here
|