Home › General › MAINTENANCE › ENGINE
RM24M0E _V1 General _059571 MAINTENANCE _0292043 ENGINE N

MAINTENANCE  ENGINE  GENERAL MAINTENANCE  


CAUTION / NOTICE / HINT

HINT:

Perform these procedures after the engine has cooled down.


PROCEDURE

Hide 1.INSPECT DRIVE BELT

a.

Check the drive belt.

Type See procedure
2AZ-FE (Click here)
2GR-FE (Click here)


Hide 2.INSPECT VALVE CLEARANCE

a.

Check the valve clearance (See page Engine / Hybrid System>2AZ-FE ENGINE MECHANICAL>VALVE CLEARANCE>ADJUSTMENT). (for 2AZ-FE)


Hide 3.REPLACE ENGINE OIL AND OIL FILTER

a.

Check the engine oil and oil filter.

Type See procedure
2AZ-FE (Click here)
2GR-FE (Click here)


Hide 4.REPLACE ENGINE COOLANT

a.

Check the engine coolant.

Type See procedure
2AZ-FE (Click here)
2GR-FE (Click here)


Hide 5.INSPECT SPARK PLUGS

a.

Check the spark plugs.

Type See procedure
2AZ-FE (Click here)
2GR-FE (Click here)


Hide 28800 6.INSPECT BATTERY

a.

Check the battery.

Type See procedure
2AZ-FE (Click here)
2GR-FE (Click here)


Hide 17801 7.INSPECT AIR CLEANER FILTER ELEMENT

a.

Remove the air cleaner filter element.


b.
A156094

Check that the air cleaner filter element is not excessively dirty.

If the air cleaner filter element is excessively dirty, replace the air cleaner filter element.


c.

If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.


d.

Reinstall the air cleaner filter element.


e.

When an excessive amount of dirt is present, replace the air cleaner filter element.


Hide 8.INSPECT EXHAUST PIPES AND MOUNTINGS

a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.


Hide 77310A 9.INSPECT FUEL TANK CAP ASSEMBLY

a.

Check the fuel tank cap gasket.

Type See procedure
2AZ-FE (Click here)
2GR-FE (Click here)


Hide 10.INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS

a.

Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.


b.

Check the tank bands for looseness or deformation.


Hide 77740 11.INSPECT CHARCOAL CANISTER

a.

Check the charcoal canister.

Type See procedure
2AZ-FE (Click here)
2GR-FE (Click here)