1.REMOVE REAR WHEEL
17430
2.REMOVE TAIL PIPE ASSEMBLY (for 2AZ-FE)
17430
3.REMOVE TAIL PIPE ASSEMBLY (for 2GR-FE)
4.REMOVE REAR DISC BRAKE CALIPER ASSEMBLY LH
5.REMOVE REAR DISC BRAKE CALIPER ASSEMBLY RH
Use the same procedure described for the LH side.
42431
6.REMOVE REAR DISC
46430
7.DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
46420
8.DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY
89516
9.REMOVE SKID CONTROL SENSOR WIRE
42450B
10.REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH
42450A
11.REMOVE REAR AXLE HUB AND BEARING ASSEMBLY RH
Use the same procedure described for the LH side.
12.REMOVE PARKING BRAKE ASSEMBLY LH
Remove the parking brake with cable from the axle beam.
13.REMOVE PARKING BRAKE ASSEMBLY RH
Use the same procedure described for the LH side.
89408C
14.REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
48540
15.REMOVE REAR SHOCK ABSORBER ASSEMBLY LH
48530
16.REMOVE REAR SHOCK ABSORBER ASSEMBLY RH
Use the same procedure described for the LH side.
48259A
17.REMOVE REAR COIL SPRING INSULATOR UPPER LH
48257C
18.REMOVE REAR COIL SPRING INSULATOR UPPER RH
Use the same procedure described for the LH side.
48231B
19.REMOVE REAR COIL SPRING LH
48231A
20.REMOVE REAR COIL SPRING RH
Use the same procedure described for the LH side.
48258C
21.REMOVE REAR COIL SPRING INSULATOR LOWER LH
48258B
22.REMOVE REAR COIL SPRING INSULATOR LOWER RH
Use the same procedure described for the LH side.
42110F
23.REMOVE REAR AXLE BEAM ASSEMBLY
Support the axle beam with the jack.
Remove the 2 bolts, 2 nuts and axle beam.
57794
24.REMOVE REAR NO. 1 SUSPENSION ARM BRACKET REAR LH
Remove the 2 bolts and bracket.
57793
25.REMOVE REAR NO. 1 SUSPENSION ARM BRACKET REAR RH
Use the same procedures described for the LH side.
42116
26.REMOVE REAR AXLE BEAM COVER
Remove the 2 bolts and cover.
Perform the procedure above on the other side.