1. PRECAUTION (for Glass Hatch Type)
68920
2.INSTALL POWER BACK DOOR UNIT SET ASSEMBLY LH (w/ Power Back Door)
68910A
3.INSTALL POWER BACK DOOR UNIT SET ASSEMBLY RH (w/ Power Back Door)
Use the same procedure as for the LH side.
68948
4.INSTALL BACK DOOR DAMPER STAY LOWER BRACKET LH (w/o Power Back Door)
68947
5.INSTALL BACK DOOR DAMPER STAY LOWER BRACKET RH (w/o Power Back Door)
Use the same procedure as for the LH side.
68960
6.INSTALL BACK DOOR STAY ASSEMBLY LH (w/o Power Back Door)
68950C
7.INSTALL BACK DOOR STAY ASSEMBLY RH (w/o Power Back Door)
Use the same procedure as for the LH side.
67837L
8.INSTALL DOOR DUST PROOF SEAL
Engage the guide and 2 claws to install the door dust proof seal.
Use the same procedure for the RH side and LH side.
9.INSTALL CUSHION (for Glass Hatch Type)
Engage the 4 claws to install 4 new cushions.
69478
10.INSTALL BACK DOOR LOWER STOPPER CUSHION
Engage the 2 claws to install 2 new back door lower stopper cushions.
81270D
11.INSTALL LICENSE PLATE LIGHT ASSEMBLY (for LH Side)
81270D
12.INSTALL LICENSE PLATE LIGHT ASSEMBLY (for RH Side)
Use the same procedure as for the LH side.
86790
13.INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)
14.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
81590A
15.INSTALL REAR LIGHT ASSEMBLY LH
81580D
16.INSTALL REAR LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
67882D
17.INSTALL NO. 2 BACK DOOR WEATHERSTRIP
| *a | Joint |
| *b | Alignment mark (Pink) |
| *c | Alignment mark (Yellow) |
Install a new No. 2 back door weatherstrip so that the alignment marks, joint and areas indicated by the arrows, are aligned as shown in the illustration.
After installation, check that the corners fit correctly.
68131
18.INSTALL BACK DOOR GLASS
68961J
19.INSTALL BACK WINDOW STAY BOLT (for Glass Hatch Type)
for LH Side: Click hereVehicle Exterior>DOOR / HATCH>BACK WINDOW SUPPORT>INSTALLATION
for RH Side:
Use the same procedure as for the LH side.
68940
20.INSTALL BACK WINDOW STAY ASSEMBLY LH (for Glass Hatch Type)
68930
21.INSTALL BACK WINDOW STAY ASSEMBLY RH (for Glass Hatch Type)
Use the same procedure as for the LH side.
22.INSTALL REAR SPOILER SUB-ASSEMBLY
76088B
23.INSTALL REAR SIDE SPOILER SUB-ASSEMBLY LH
76087B
24.INSTALL REAR SIDE SPOILER SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
69370E
25.INSTALL BACK WINDOW LOCK ASSEMBLY (for Glass Hatch Type)
69806
26.INSTALL BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type)
Engage the clip.
Install the back door glass guide bracket sub-assembly with the 4 bolts.
Tighten the bolts in the order shown in the illustration.
Engage the 2 clamps to connect the wire harness.
Connect the 2 connectors.
85143R
27.INSTALL REAR WIPER MOTOR GROMMET (for Fixed Glass Type)
85110R
28.INSTALL REAR WIPER MOTOR ASSEMBLY (for Fixed Glass Type)
85110R
29.INSTALL REAR WIPER MOTOR ASSEMBLY (for Glass Hatch Type)
85148R
30.INSTALL REAR WIPER LINK PIVOT WITH WASHER PACKING (for Glass Hatch Type)
85176R
31.INSTALL REAR WIPER LINK CAP (for Glass Hatch Type)
32.INSTALL REAR WIPER ARM AND BLADE ASSEMBLY
85292A
33.INSTALL REAR WIPER ARM HEAD CAP
85132A
34.INSTALL REAR WIPER SHAFT COVER (for Glass Hatch Type)
67282F
35.INSTALL BACK DOOR LOWER STOPPER LH
Install the back door lower stopper LH with the 2 bolts.
67281B
36.INSTALL BACK DOOR LOWER STOPPER RH
Use the same procedure as for the LH side.
89222A
37.INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)
67372A
38.INSTALL BACK DOOR WEIGHT (w/ Weight)
Engage the guide.
Install the back door weight with the 3 bolts.
Tighten the bolts in the order shown in the illustration.
84280D
39.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)
84270G
40.INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)
Use the same procedure as for the LH side.
86160Y
41.INSTALL REAR NO. 2 SPEAKER ASSEMBLY (w/ Back Door Speaker)
86160Z
42.INSTALL REAR NO. 3 SPEAKER ASSEMBLY (w/ Back Door Speaker)
84931C
43.INSTALL BACK DOOR CONTROL SWITCH (w/ Power Back Door)
69350
44.INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)
69350
45.INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)
74811D
46.INSTALL DOOR PULL HANDLE
Engage the 4 claws to install the door pull handle.
With the back door fully open, install the door pull handle so that the arrow on the backside of door pull handle points up.
64798
47.INSTALL BACK DOOR LOCK COVER (for Fixed Glass Type)
Engage the 2 guides and 3 claws to install the back door lock cover.
64780A
48.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
Engage the 2 guides.
Engage the 16 clips to install the back door trim panel assembly.
67766
49.INSTALL NO. 2 BACK DOOR SERVICE HOLE COVER
Engage the 2 guides and 4 clips to install the No. 2 back door service hole cover.
67765A
50.INSTALL NO. 1 BACK DOOR SERVICE HOLE COVER
Engage the 2 guides and 4 clips to install the No. 1 back door service hole cover.
64798
51.INSTALL BACK DOOR LOCK COVER (for Glass Hatch Type)
Engage the 2 guides and 3 claws to install the back door lock cover.
64792
52.INSTALL BACK DOOR TRIM COVER LH
Engage the guide, 2 claws and 2 clips to install the back door trim cover LH.
64791C
53.INSTALL BACK DOOR TRIM COVER RH
Use the same procedure as for the LH side.
64783A
54.INSTALL BACK WINDOW UPPER TRIM PANEL
Engage the 4 clips and 4 claws to install the back window upper trim panel.
55.INITIALIZE POWER BACK DOOR SYSTEM (w/ Power Back Door)
56.INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)
57.INSPECT BACK DOOR CLOSER SYSTEM (w/ Power Back Door)
86790
58.ADJUST TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)
86790
59.ADJUST TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)