Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING SUPPORT BRAKE SYSTEM › from 2020.11
RM37A0E _56 Audio / Visual / Telematics _086880 PARK ASSIST / MONITORING _0420184 PARKING SUPPORT BRAKE SYSTEM T

PARK ASSIST / MONITORING  PARKING SUPPORT BRAKE SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



General
Symptom Suspected Area Link
System does not operate at all TOYOTA parking assist-sensor system*1 Click here
TOYOTA parking assist-sensor system*2 Click here
CAN communication system*3 Click here
CAN communication system*4 Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
Steering pad switch assembly Click here
Blind spot monitor system Click here

*1: w/ Parking Support Brake System (Forward/reverse Type)

*2: w/ Parking Support Brake System (Reverse Only Type)

*3: for HV Model

*4: for Gasoline Model

*5: for LHD

*6: for RHD


Sonar Function
Symptom Suspected Area Link
Detection function operates when the operating conditions are not met SFI System*1 Click here
SFI System*2 Click here
Hybrid control system*1 Click here
Skid control ECU*1 Click here
Skid control ECU*2 Click here
Blind spot monitor system Click here
Clearance warning ECU assembly*3 Click here
Clearance warning ECU assembly*4 Click here
Detection function operates when vehicle is not within the required speed range (speedometer not malfunctioning) CAN communication system*1 Click here
CAN communication system*2 Click here
Clearance warning ECU assembly*3 Click here
Clearance warning ECU assembly*4 Click here

*1: for HV Model

*2: for Gasoline Model

*3: for LHD

*4: for RHD


Buzzer Function
Symptom Suspected Area Link
Parking support brake system is normal but buzzer operation is intermittent Check that the temporary mute function is not operating -
Proceed to "No. 1 Clearance Warning Buzzer Circuit"*1 Click here
Proceed to "No. 1 Clearance Warning Buzzer Circuit"*2 Click here
Proceed to "No. 2 Clearance Warning Buzzer Circuit"*1 Click here
Proceed to "No. 2 Clearance Warning Buzzer Circuit"*2 Click here
Proceed to "Buzzer does not Sound"*1 Click here
Proceed to "Buzzer does not Sound"*2 Click here
Clearance warning ECU assembly*3 Click here
Clearance warning ECU assembly*4 Click here
Combination meter assembly Click here
Blind spot monitor system Click here

*1: w/ Parking Support Brake System (Forward/reverse Type)

*2: w/ Parking Support Brake System (Reverse Only Type)

*3: for LHD

*4: for RHD


Display Function
Symptom Suspected Area Link
While the parking support brake system is operating, no parking support brake notifications are displayed on the multi-information display. CAN communication system*2 Click here
CAN communication system*3 Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
Combination meter assembly Click here
While the parking support brake system is operating, no parking support brake notifications are displayed on the radio and display receiver assembly*9 or multi-display assembly.*10. CAN communication system*2 Click here
CAN communication system*3 Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
Radio and display receiver assembly*9 Click here
Multi-display assembly*10 Click here
Parking assist ECU *4 Click here
While the parking support brake system is operating, no parking support brake notifications are displayed on the headup display.*1 CAN communication system*2 Click here
CAN communication system*3 Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
Meter mirror sub-assembly Click here
"PKSB Malfunction Visit Your Dealer" is displayed CAN communication system*2 Click here
CAN communication system*3 Click here
Combination meter assembly Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
"PKSB Unavailable" is displayed Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point (Parking support brake system registration) Click here
CAN communication system*2 Click here
CAN communication system*3 Click here
TOYOTA parking assist-sensor system*7 Click here
TOYOTA parking assist-sensor system*8 Click here
Combination meter assembly Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
Blind spot monitor system Click here
Parking support brake system does not operate when there is a possibility of a collision (Warning message "PKSB Unavailable" not displayed) Check the installation of the ultrasonic sensors (front)*7 Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front)*7 Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
Parking support brake system control operates when there is no possibility of a collision Check the installation of the ultrasonic sensors (front)*7 Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front)*7 Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
Parking support brake system control cannot be turned off (PKSB OFF indicator does not illuminate) Combination meter assembly (LED): Perform Active Test (Indicat. PKSB OFF LCD) Click here
Steering pad switch assembly Click here
Spiral cable sub-assembly Click here
Clearance warning ECU assembly*5 Click here
Clearance warning ECU assembly*6 Click here
PKSB OFF indicator blinks If "Yes" is displayed for the Data List item "BSM Radar Communication Invalid History", the blind spot monitor system may be malfunctioning. Click here
Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point (Parking support brake system registration) Click here

*1: w/ Headup Display System

*2: for HV Model

*3: for Gasoline Model

*4: w/ Panoramic View Monitor System

*5: for LHD

*6: for RHD

*7: w/ Parking Support Brake System (Forward/reverse Type)

*8: w/ Parking Support Brake System (Reverse Only Type)

*9: for 8 Inch Display

*10: for 12.3 Inch Display