Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE › 2015.06–2016.08
RM27T0E _54 Brake _053716 PARKING BRAKE _0260941 PARKING BRAKE CABLE A

PARKING BRAKE  PARKING BRAKE CABLE  INSTALLATION  


PROCEDURE

Hide 46430 1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.

for 3 Door:

i.

Install the No. 4 parking brake cable clamp with the bolt.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)


ii.

Attach the No. 2 parking brake cable clamp to the No. 3 parking brake cable.


iii.

Install the No. 3 parking brake cable with the 2 bolts and 3 nuts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)



b.

for 5 Door:

i.

Attach the No. 3 parking brake cable clamp to the No. 3 parking brake cable.


ii.

Install the No. 3 parking brake cable with the 4 bolts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)


iii.

Install the No. 1 parking brake cable heat insulator.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)



c.

Attach the claws of the No. 3 parking brake cable.


d.

Connect the No. 3 parking brake cable to the No. 1 parking brake pull rod.


e.

Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 46420 2.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY

a.

for 3 Door:

i.

Install the No. 3 parking brake cable clamp with the bolt.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)


ii.

Attach the No. 1 parking brake cable clamp to the No. 2 parking brake cable.


iii.

Install the No. 2 parking brake cable with the 2 bolts and 3 nuts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)



b.

for 5 Door:

i.

Attach the No. 2 parking brake cable clamp to the No. 2 parking brake cable.


ii.

Install the No. 2 parking brake cable with the 5 bolts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)



c.

Attach the claws of the No. 2 parking brake cable.


d.

Connect the No. 2 parking brake cable to the No. 1 parking brake pull rod.


e.

Install the No. 2 parking brake cable assembly to the backing plate with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 46590 3.CONNECT NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER

HINT:

Refer to the procedures from "Install No. 2 Parking Brake Shoe Assembly with Parking Brake Shoe Lever" (See page Brake>PARKING BRAKE>PARKING BRAKE ASSEMBLY>REASSEMBLY).


Hide 77100U 4.INSTALL FUEL TANK SUB-ASSEMBLY

a.

for 1GR-FE:

Install the fuel tank sub-assembly (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL TANK>INSTALLATION).


b.

for 1KD-FTV, for 3 Door:

Install the fuel tank sub-assembly (See page Engine / Hybrid System>1KD-FTV (FUEL)>FUEL TANK(for 3 Door)>INSTALLATION).


c.

for 1KD-FTV, for 5 Door:

Install the fuel tank sub-assembly (See page Engine / Hybrid System>1KD-FTV (FUEL)>FUEL TANK (for 5 Door)>INSTALLATION).


d.

for 2TR-FE, for 3 Door:

Install the fuel tank sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL TANK (for 3 Door)>INSTALLATION).


e.

for 2TR-FE, for 5 Door:

Install the fuel tank sub-assembly (See page Engine / Hybrid System>2TR-FE (FUEL)>FUEL TANK (for 5 Door)>INSTALLATION).


f.

for 5L-E:

Install the fuel tank sub-assembly (See page Engine / Hybrid System>5L-E (FUEL)>FUEL TANK>INSTALLATION).


Hide 17420 5.INSTALL CENTER EXHAUST PIPE ASSEMBLY (for 3 Door)

a.

for 1KD-FTV:

Install the center exhaust pipe assembly (See page Engine / Hybrid System>1KD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION).


b.

for 2TR-FE:

Install the center exhaust pipe assembly (See page Engine / Hybrid System>2TR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION).


Hide 6.INSPECT PARKING BRAKE LEVER TRAVEL

Hide 7.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 58910C 8.INSTALL REAR CONSOLE BOX ASSEMBLY

a.

for Automatic Transmission:

Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION).


b.

for Manual Transmission:

Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION).


c.

w/ Refrigerated Cool Box:

Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>INSTALLATION).


d.

for Bench Seat Type:

Install the rear console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Bench Seat Type)>INSTALLATION).


Hide 9.INSTALL REAR WHEEL

Torque:
for Aluminum Wheel : 103 N*m (1050 kgf*cm, 76 ft.*lbf)
for Steel Wheel : 112 N*m (1137 kgf*cm, 82 ft.*lbf)