Home › General › MAINTENANCE › GENERAL MAINTENANCE › 2021.04–2021.07
RM38G0E _V1 General _100461 MAINTENANCE _0467444 GENERAL MAINTENANCE F

MAINTENANCE  GENERAL MAINTENANCE  ENGINE  


HINT:

Perform these procedures after the engine has cooled down.



REPLACE ENGINE OIL AND OIL FILTER


a.

Replace the engine oil and oil filter.




INSPECT COOLING AND HEATER SYSTEM


a.

Check that the radiator, condenser and/or intercooler is not blocked with leaves, dirt or insects, and clean them if necessary. Also check the hose connection for the installation condition, corrosion, etc.



INSPECT ENGINE COOLANT




REPLACE ENGINE COOLANT


a.

Replace the engine coolant.

·

for V35A-FTS:





INSPECT ENGINE OIL COOLER HOSES AND CONNECTIONS (for 1GR-FE)


a.

Check the oil cooler hoses for cracks, leakage, loose connections and deformation.



INSPECT EXHAUST PIPES AND MOUNTINGS


a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.



REPLACE SPARK PLUGS


a.

Replace the spark plugs.





REPLACE FUEL FILTER




ADD FUEL INJECTION SYSTEM


a.

Add fuel injector cleaner to the fuel tank.



INSPECT AIR CLEANER FILTER ELEMENT


a.

Remove the air cleaner filter element.


b.
A156094

Check that the air cleaner filter element is not excessively dirty.

If the air cleaner filter element is excessively dirty, replace the air cleaner filter element.


c.

If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.


d.

Reinstall the air cleaner filter element.



INSPECT FUEL LINES, CONNECTIONS, AND FUEL TANK VAPOR VENT SYSTEM HOSES


a.

Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.


b.

Check for tank band looseness or deformation.



INSPECT FUEL TANK CAP GASKET




INSPECT CHARCOAL CANISTER