Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT AIR CONDITIONING UNIT (for RHD) › from 2021.07
RM38G0E _58 Vehicle Interior _100766 HEATING / AIR CONDITIONING _0468594 FRONT AIR CONDITIONING UNIT(for RHD) A

HEATING / AIR CONDITIONING  FRONT AIR CONDITIONING UNIT(for RHD)  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
E464461N02
5.594,3.865 6.656,4.063 1.063,0.198 5.583,1.854 5.906,1.854 false 0.688,4.156 1.198,4.156 false 5.698,4.448 5.323,4.448 5.323,4.448 4.969,3.885 false 6.021,1.542 6.323,1.542 false 1.406,3.844 1.625,3.844 false 5.583,3.969 5.427,3.969 5.427,3.969 5.427,3.781 false 5.521,3.646 5.979,3.844 0.458,0.198 10 false x 4 5.75,4.292 6.302,4.646 0.552,0.354 18 false 3 6.698,1.354 7.094,1.677 0.396,0.323 18 false 4 1.969,3.677 2.521,4.031 0.552,0.354 18 false 4 0.531,4 1.083,4.354 0.552,0.354 18 false 1 5.406,1.698 5.958,2.052 0.552,0.354 18 false 2 6.583,1.406 6.74,1.604 0.156,0.198 10 false ● 1.865,3.719 2.021,3.917 0.156,0.198 10 false ● 5.635,3.885 6.708,4.073 1.073,0.188 8 false 9.8 (100, 87 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

1 NO. 1 COOLING UNIT BRACKET 88536 - - -
2 NO. 2 COOLING UNIT BRACKET 88536A - - -
3 AIR CONDITIONER UNIT ASSEMBLY - - - -
4 COOLER UNIT DRAIN HOSE GROMMET 88539G (Click here) - -

V100146

N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part

E464460N02
5.24,3.333 6,3.563 0.76,0.229 1.802,1.365 2.563,1.594 0.76,0.229 1.313,0.646 2.073,0.875 0.76,0.229 4.302,3.875 5.104,4.167 0.802,0.292 4.344,3.917 5.063,4.125 0.719,0.208 1.583,4.469 2.646,4.677 1.063,0.208 4.271,0.677 4.552,0.24 4.552,0.24 4.771,0.24 false 1.51,2.635 1.813,2.635 1.813,2.635 2.156,3.146 false 4.927,3.25 4.927,3.448 4.927,3.448 5.24,3.448 false 4.031,3.823 4.031,4.021 4.031,4.021 4.344,4.021 false 2.854,1.271 2.854,1.469 2.854,1.469 2.573,1.469 false 2.073,0.76 2.521,0.76 false 1.229,4.573 1.583,4.573 false 2.646,0.813 3.104,1.01 0.458,0.198 10 false x 2 5.021,3.094 5.479,3.292 0.458,0.198 10 false x 4 5.031,0.094 5.583,0.448 0.552,0.354 18 false 5 1.302,2.479 1.854,2.833 0.552,0.354 18 false 5 5.313,3.365 6.781,3.521 1.469,0.156 8 false 25 (255, 18) 1.875,1.396 3.344,1.552 1.469,0.156 8 false 25 (255, 18) 1.385,0.677 2.854,0.833 1.469,0.156 8 false 25 (255, 18) 4.396,3.938 5.865,4.094 1.469,0.156 8 false 15 (153, 11) 1.646,4.5 4.219,4.656 2.573,0.156 8 false 9.8 (100, 87 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

5 INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY - (Click here) - -

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)
V100146

N*m (kgf*cm, ft.*lbf): Specified torque

E464492N03
0.698,2.885 2.26,3.875 1.563,0.99 3.927,2.406 4.594,2.583 0.667,0.177 3.885,2.354 4.646,2.625 0.76,0.271 5.24,2.844 5.938,3.042 0.698,0.198 3.083,3.563 3.781,3.76 0.698,0.198 2.802,4.427 3.5,4.625 0.698,0.198 5.646,4.344 6.344,4.542 0.698,0.198 3.823,0.708 4.333,0.708 false 3.677,4.177 4.167,4.177 false 5.823,3.625 6.094,3.625 false 3.458,2.875 3.969,2.875 false 1.229,3.365 1.344,3.594 1.344,3.594 1.646,3.594 false 1.74,2.26 1.74,2.5 1.74,2.5 3.927,2.5 false 3.781,3.667 3.979,3.667 3.979,3.667 3.979,3.844 false 5.938,2.938 6.135,2.938 6.135,2.938 6.135,3.271 false 3.51,4.531 3.729,4.531 false 6.531,4.208 6.531,4.448 6.531,4.448 6.344,4.448 false 3.292,2.135 3.292,2.49 false 3.583,1.813 3.583,2.49 false 2.042,0.479 2.5,0.677 0.458,0.198 10 false x 2 6.229,3.26 6.688,3.458 0.458,0.198 10 false x 2 1.854,2.115 2.313,2.313 0.458,0.198 10 false x 4 0.729,2.917 1.104,3.156 0.375,0.24 12 false *A 3.49,4.031 4.042,4.385 0.552,0.354 18 false 8 6.365,3.479 6.917,3.833 0.552,0.354 18 false 7 4.031,2.708 4.583,3.063 0.552,0.354 18 false 10 1.698,3.427 2.25,3.781 0.552,0.354 18 false 9 4.375,0.552 4.927,0.906 0.552,0.354 18 false 6 3.99,2.417 5.344,2.573 1.354,0.156 8 false 10 (102, 7) 2.854,4.448 4.323,4.604 1.469,0.156 8 false 16 (163, 12) 5.698,4.365 7.094,4.531 1.396,0.167 8 false 16 (163, 12) 5.271,2.865 6.74,3.021 1.469,0.156 8 false 18 (184, 13) 3.115,3.583 4.583,3.74 1.469,0.156 8 false 18 (184, 13)

Procedure Part Name Code
Z101186

Z101188

Z101187

6 INSTRUMENT PANEL WIRE 82141 - - -
7 NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY 55306A (Click here) - -
8 NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY 55307C (Click here) - -
9 HEATER BLOWER WIRE 82213E - - -
10 NO. 1 AIR DUCT SUB-ASSEMBLY 87201 - - -

*A w/ PTC Heater - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)
V100146

N*m (kgf*cm, ft.*lbf): Specified torque

E464882N04
1.906,0.073 3.323,1.125 1.417,1.052 2.396,2.01 4.146,3.094 1.75,1.083 2.354,0.823 3.083,1.031 0.729,0.208 2.469,1.469 3.198,1.677 0.729,0.208 2.573,0.302 2.823,0.302 false 6.042,0.708 6.135,0.427 6.135,0.427 6.313,0.427 false 0.5,1.302 0.656,1.021 0.656,1.021 0.833,1.021 false 4.51,0.583 4.667,0.948 4.667,0.948 4.844,0.948 false 2.813,2.833 2.99,2.833 2.99,2.833 3.135,2.604 false 6.385,4.104 6.563,4.104 6.563,4.104 6.719,3.75 false 1.625,4.594 1.802,4.594 1.802,4.594 1.99,4.281 false 4.083,3.438 4.333,3.438 4.333,3.438 4.604,2.573 false 4.583,3.917 4.74,4.281 4.74,4.281 4.917,4.281 false 1.885,2.667 2.219,3.5 2.219,3.5 2.49,3.5 false 0.708,3 1.031,2.99 false 1.813,1.573 1.927,1.865 1.927,1.865 2.104,1.865 false 5.313,2.479 5.615,2.479 false 2.698,0.677 2.698,0.823 false 2.24,1.573 2.469,1.573 false 2.792,0.552 3.25,0.75 0.458,0.198 10 false x 2 3.781,2.396 4.24,2.594 0.458,0.198 10 false x 2 2.448,2.052 2.76,2.292 0.313,0.24 12 false *A 1.948,0.104 2.26,0.344 0.313,0.24 12 false *B 4.885,0.792 5.438,1.146 0.552,0.354 18 false 23 2.521,2.667 3.073,3.021 0.552,0.354 18 false 22 4.948,4.115 5.5,4.469 0.552,0.354 18 false 21 0.385,2.854 0.938,3.208 0.552,0.354 18 false 17 1.323,4.448 1.875,4.802 0.552,0.354 18 false 18 6.083,3.948 6.635,4.302 0.552,0.354 18 false 20 5.885,2.302 6.438,2.656 0.552,0.354 18 false 19 2.542,3.344 3.094,3.698 0.552,0.354 18 false 15 3.823,3.302 4.375,3.656 0.552,0.354 18 false 16 6.563,0.271 7.115,0.625 0.552,0.354 18 false 14 1.104,0.854 1.656,1.208 0.552,0.354 18 false 13 2.115,1.688 2.667,2.042 0.552,0.354 18 false 12 2.865,0.146 3.417,0.5 0.552,0.354 18 false 11 2.406,0.844 4,1 1.594,0.156 8 false 12.5 (127, 9) 2.5,1.5 4.094,1.656 1.594,0.156 8 false 11.1 (113, 8) 6.396,1.156 6.854,1.354 0.458,0.198 10 false x 2

Procedure Part Name Code
Z101186

Z101188

Z101187

11 DOOR CONTROL BATTERY 8598A - - -
12 WINDSHIELD WIPER RELAY ASSEMBLY 85940 - - -
13 ECU INTEGRATION BOX LH 82878 (Click here) - -
14 POWER DISTRIBUTION BOX ASSEMBLY 82730G (Click here) - -
15 REAR NO. 2 AIR DUCT 87212F - - -
16 REAR NO. 1 AIR DUCT 87212 - - -
17 REAR NO. 4 AIR DUCT 87212H (Click here) - -
18 REAR NO. 6 AIR DUCT 87212K - - -
19 REAR NO. 3 AIR DUCT 87212G (Click here) - -
20 REAR NO. 5 AIR DUCT 87212J - - -
21 NO. 1 COOLER AIR DUCT 88576C - - -
22 TELEPHONE TRANSCEIVER ASSEMBLY WITH BRACKET - - - -
23 NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY 55084E - - -

*A w/ Telematics Transceiver *B w/ Door Control Battery
V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -

E460188N03
4,0.063 5.656,0.729 1.656,0.667 2.698,4.333 3.438,4.531 0.74,0.198 2.656,4.292 3.479,4.573 0.823,0.281 5.063,3.302 5.802,3.5 0.74,0.198 5.021,3.26 5.844,3.542 0.823,0.281 4.74,0.375 4.854,0.26 4.854,0.26 5.104,0.26 false 1.344,0.708 1.667,0.708 false 0.938,1.719 0.99,1.885 0.99,1.885 1.198,1.885 false 1.042,5.052 1.313,5.052 1.313,5.052 1.49,4.885 false 4.917,1.979 5.24,1.979 false 3.615,2.24 3.885,2.24 3.885,2.24 4.052,1.917 false 3.865,1.052 4.188,1.052 false 3.875,2.75 4.135,2.75 4.135,2.75 4.344,2.979 false 5.177,5 5.406,5.438 5.406,5.438 5.677,5.438 false 5.938,3.073 6.208,3.073 6.208,3.073 6.417,2.74 false 0.979,3.115 0.885,2.771 0.885,2.771 0.667,2.771 false 2.844,3.729 3.021,3.417 3.021,3.417 3.208,3.417 false 2.51,3.865 2.51,4.427 2.51,4.427 2.688,4.427 false 4.75,2.896 4.75,3.396 4.75,3.396 5.063,3.396 false 1.854,3.26 2.177,3.26 false 5.948,1.74 6.198,1.74 false 5.406,0.5 5.865,0.698 0.458,0.198 10 false x 4 4.24,3.729 4.698,3.927 0.458,0.198 10 false x 6 4.208,0.896 4.76,1.25 0.552,0.354 18 false 36 1.021,0.563 1.573,0.917 0.552,0.354 18 false 35 5.115,0.115 5.667,0.469 0.552,0.354 18 false 34 3.323,2.094 3.875,2.448 0.552,0.354 18 false 33 3.583,2.594 4.094,3 0.51,0.406 18 false 32 3.24,3.281 3.75,3.688 0.51,0.406 18 false 32 2.198,3.115 2.708,3.521 0.51,0.406 18 false 30 4.625,1.833 5.135,2.24 0.51,0.406 18 false 31 0.74,4.896 1.25,5.302 0.51,0.406 18 false 27 0.354,2.625 0.865,3.031 0.51,0.406 18 false 26 5.646,2.927 6.156,3.333 0.51,0.406 18 false 29 6.479,1.573 6.99,1.979 0.51,0.406 18 false 28 1.229,1.719 1.74,2.125 0.51,0.406 18 false 25 5.74,5.271 6.25,5.677 0.51,0.406 18 false 24 4.042,0.094 4.292,0.323 0.25,0.229 12 false *A 2.76,4.354 4.229,4.51 1.469,0.156 8 false 42 (428, 31) 5.125,3.323 6.594,3.479 1.469,0.156 8 false 42 (428, 31)

Procedure Part Name Code
Z101186

Z101188

Z101187

24 FRONT FLOOR CARPET ASSEMBLY 58510D - - -
25 AIR CONDITIONING AMPLIFIER ASSEMBLY 88650N - - -
26 CENTER PILLAR LOWER GARNISH LH 62414A (Click here) - -
27 REAR DOOR SCUFF PLATE LH 67918D - - -
28 CENTER PILLAR LOWER GARNISH RH 62413A (Click here) - -
29 REAR DOOR SCUFF PLATE RH 67917C - - -
30 FRONT SEAT OUTER BELT ASSEMBLY LH (FLOOR ANCHOR) 73220 - - -
31 FRONT SEAT OUTER BELT ASSEMBLY RH (FLOOR ANCHOR) 73210 - - -
32 OUTER LAP BELT ANCHOR COVER 73233 - - -
33 STEERING COLUMN ASSEMBLY 45250 - - -
34 METER MIRROR SUB-ASSEMBLY 83108 - - -
35 LOWER DEFROSTER NOZZLE ASSEMBLY 55990B - - -
36 INSTRUMENT PANEL SAFETY PAD - - - -

*A w/ Headup Display - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) - -

E464456N02
0.74,2.552 1.25,2.552 false 5.813,1.281 6.323,1.281 false 0.469,2.385 1.021,2.74 0.552,0.354 18 false 37 6.344,1.115 6.896,1.469 0.552,0.354 18 false 38

Procedure Part Name Code
Z101186

Z101188

Z101187

37 FRONT SEAT ASSEMBLY LH - - - -
38 FRONT SEAT ASSEMBLY RH - - - -

E468004N02
0.125,0.073 1.781,2.573 1.656,2.5 0.125,2.688 1.781,5.052 1.656,2.365 0.677,2.281 1.729,2.5 1.052,0.219 2.427,5.49 3.156,5.688 0.729,0.198 2.083,4.688 3.094,4.906 1.01,0.219 0.656,4.781 1.708,5 1.052,0.219 0.854,3.344 0.938,3.594 0.938,3.594 1.094,3.594 false 0.719,3.146 0.854,2.927 0.854,2.927 1.01,2.927 false 0.938,0.792 0.99,0.948 0.99,0.948 1.146,0.948 false 0.729,0.531 0.813,0.281 0.813,0.281 0.969,0.281 false 0.875,4.208 1.156,4.208 false 0.969,1.656 1.25,1.656 false 3.313,1.354 3.448,1.135 3.448,1.135 3.604,1.135 false 2.417,0.771 2.552,0.552 2.552,0.552 2.708,0.552 false 3.021,2.198 3.302,2.198 false 2.552,4.24 2.625,4.448 2.625,4.448 2.781,4.448 false 3.083,3.625 3.167,3.26 3.167,3.26 3.375,3.26 false 2.667,3.802 2.906,3.802 2.906,3.802 2.906,4.031 false 2.656,3.844 2.896,3.844 false 1.177,5.573 1.458,5.573 false 2.5,5.115 2.781,5.115 false 0.563,1.917 0.563,2.385 0.563,2.385 0.677,2.385 false 2.156,5.333 2.156,5.583 2.156,5.583 2.417,5.583 false 1.906,4.104 1.906,4.792 1.906,4.792 2.083,4.792 false 0.469,4.375 0.469,4.906 0.469,4.906 0.646,4.906 false 0.208,0.115 0.583,0.354 0.375,0.24 12 false *A 0.208,2.719 0.583,2.958 0.375,0.24 12 false *B 2.24,5.271 2.552,5.469 0.313,0.198 10 false x 2 2.615,2.344 2.927,2.542 0.313,0.198 10 false x 2 0.802,2.031 1.115,2.229 0.313,0.198 10 false x 2 0.792,4.583 1.104,4.781 0.313,0.198 10 false x 2 3.365,1.302 3.677,1.5 0.313,0.198 10 false x 2 2.875,3.99 3.031,4.188 0.156,0.198 10 false ● 1.229,0.125 1.781,0.479 0.552,0.354 18 false 44 1.281,2.76 1.833,3.115 0.552,0.354 18 false 44 1.375,0.802 1.927,1.156 0.552,0.354 18 false 43 1.302,3.448 1.854,3.802 0.552,0.354 18 false 43 3.333,2.031 3.885,2.385 0.552,0.354 18 false 45 2.823,4.958 3.375,5.313 0.552,0.354 18 false 46 0.896,5.448 1.448,5.802 0.552,0.354 18 false 47 3.042,4.302 3.594,4.656 0.552,0.354 18 false 41 3.417,3.104 3.969,3.458 0.552,0.354 18 false 40 3.635,0.969 4.188,1.323 0.552,0.354 18 false 39 2.75,0.385 3.302,0.74 0.552,0.354 18 false 42 1.26,1.521 1.813,1.875 0.552,0.354 18 false 48 1.198,4.083 1.75,4.438 0.552,0.354 18 false 49 0.719,2.302 1.823,2.458 1.104,0.156 8 false 9.8 (100, 87 in.*lbf) 2.5,5.51 3.479,5.667 0.979,0.156 8 false 10 (102, 7) 2.135,4.708 3.115,4.865 0.979,0.156 8 false 5.4 (55, 48 in.*lbf) 0.698,4.823 1.802,4.979 1.104,0.156 8 false 9.8 (100, 87 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

39 HOLE PLUG - - - -
40 COOLER PIPE GROMMET 88897K - - -
41 NO. 3 AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY 88710K (Click here) - -
42 HEATER GROMMET 87128 - - -
43 INLET HEATER WATER HOSE A 87245A (Click here) - -
44 OUTLET HEATER WATER HOSE A 87246A (Click here) - -
45 OUTER DASH PANEL INSULATOR 55223A - - -
46 WIRING HARNESS CLAMP BRACKET - - - -
47 REAR ENGINE SIDE UNDER COVER ASSEMBLY LH 51470C - - -
48 HEATER PIPING COVER 87237 - - -
49 NO. 1 HEATER COVER 87114E - - -

*A for V35A-FTS *B for F33A-FTV
V100146

N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part
V100135

Compressor oil ND-OIL 8 or equivalent - -

E468001N04
1.563,0.635 3.063,1.729 1.5,1.094 1.563,1.938 3.063,3.031 1.5,1.094 2.823,4.479 3.563,4.698 0.74,0.219 6.281,0.281 6.688,0.281 false 6.344,0.74 6.698,0.74 false 3.521,0.635 3.729,0.354 3.729,0.354 3.938,0.354 false 2.333,1.271 2.542,1.563 2.542,1.563 2.719,1.563 false 0.781,1.698 0.656,2.063 0.656,2.063 0.458,2.063 false 2.844,3.823 3.052,3.51 3.052,3.51 3.26,3.51 false 0.99,3.844 1.156,3.604 1.156,3.604 1.344,3.604 false 1.688,4.333 1.781,4.167 1.781,4.167 1.958,4.167 false 2.344,2.542 2.552,2.833 2.552,2.833 2.719,2.833 false 2.823,4.573 2.542,4.573 2.542,4.573 2.542,4.396 false 2.75,1.396 3.104,1.75 0.354,0.354 18 false 58 0.188,1.885 0.583,2.24 0.396,0.354 18 false 57 3.302,3.344 3.708,3.688 0.406,0.344 18 false 56 5.469,0.125 6.51,0.469 1.042,0.344 18 false 52 - 55 6.063,0.594 6.438,0.948 0.375,0.354 18 false 51 3.969,0.177 4.375,0.542 0.406,0.365 18 false 50 2.635,4.292 3.115,4.49 0.479,0.198 10 false x 5 1.104,4.167 1.563,4.365 0.458,0.198 10 false x 2 0.323,0.948 0.781,1.146 0.458,0.198 10 false x 7 1.51,4.542 1.969,4.74 0.458,0.198 10 false x 2 1.365,3.5 1.677,3.698 0.313,0.198 10 false *2 1.99,4.063 2.302,4.26 0.313,0.198 10 false *1 2.74,2.667 3.125,3.021 0.385,0.354 18 false 59 1.604,0.677 1.979,0.917 0.375,0.24 12 false *A 1.625,1.958 2,2.198 0.375,0.24 12 false *B 2.885,4.51 3.865,4.667 0.979,0.156 8 false 29 (296, 21)

Procedure Part Name Code
Z101186

Z101188

Z101187

50 FRONT WIPER MOTOR AND LINK - - - -
51 ADD ENGINE COOLANT - - (Click here) -
52 INSPECT FOR COOLANT LEAK - (Click here) - -
53 CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT - (Click here) - -
54 WARM UP ENGINE - (Click here) - -
55 INSPECT FOR REFRIGERANT LEAK - (Click here) - -
56 NO. 1 ENGINE UNDER COVER ASSEMBLY 51410 - - -
57 UPPER RADIATOR SUPPORT SEAL 53292A - - -
58 V-BANK COVER SUB-ASSEMBLY 11209 - - -
59 NO. 1 ENGINE COVER SUB-ASSEMBLY 12601B - - -

*A for V35A-FTS *B for F33A-FTV
*1 ENGINE SIDE COVER SUB-ASSEMBLY LH *2 ENGINE SIDE COVER SUB-ASSEMBLY RH
V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -

CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 88536 1.INSTALL NO. 1 COOLING UNIT BRACKET

Hide 88536A 2.INSTALL NO. 2 COOLING UNIT BRACKET

Hide 3.INSTALL AIR CONDITIONER UNIT ASSEMBLY

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)

Hide 88539G 4.INSTALL COOLER UNIT DRAIN HOSE GROMMET

a.
E464496C01
2.74,2.396 2.938,2.146 false 4.135,2.365 3.948,2.135 false 4.094,2.365 4.406,2.563 0.313,0.198 10 false *c 2.677,2.385 2.99,2.583 0.313,0.198 10 false *c 0.385,0.063 0.667,0.417 0.281,0.354 18 false i 0.688,0.125 0.948,0.323 0.26,0.198 10 true *a 4.115,0.104 4.417,0.333 0.302,0.229 10 true *b
*a Driver Side *b Passenger Side
*c Lip - -


i.

Press the entire upper surface of the new cooler unit drain hose grommet, and fit the entire circumference of the lip to the hole.

NOTICE:
·

If the drain cooler hose is disconnected from the cooler unit drain hose grommet, make sure to replace the cooler unit drain hose grommet with a new one. Failure to do so may lead to water ingress.

·

Make sure that the entire lip of the cooler unit drain hose grommet is securely engaged to the vehicle body.





Hide 5.INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY

Z101186

NOTICE:
·

Be sure to support the air conditioning unit assembly when removing it because failure to do so may cause the bracket of the air conditioning unit assembly to break.

·

Do not hold the air conditioning harness assembly. Otherwise, static electricity from the technician may damage the air conditioning harness assembly.

·

Do not hold the heater core or pipe of the heater radiator unit sub-assembly. Otherwise, the pipe may detach, the clamp may be damaged, or the crimped areas of the heater core and pipe of the heater radiator unit sub-assembly may be damaged, causing coolant to leak.

·

Do not hold the air conditioning radiator damper servo sub-assembly, blower damper servo sub-assembly or link. Otherwise, the servo motor may become misaligned, causing abnormal operation noise, temperature control defects, or air leaks due to sealing defects in the doors.

·

Do not hold the door. Doing so may cause air leaks due to closing defects resulting from excessive opening/closing. Also, keep the door free from oil and grease.




a.
E464494C01
3.948,0.375 4.24,0.375 true 3.177,1.302 3.469,1.302 true 2.583,0.635 2.771,0.635 2.771,0.635 2.854,0.406 true 4.771,4.323 4.979,4.323 4.979,4.323 5.063,4.135 true 6.25,0.938 6.344,1.167 6.344,1.167 6.531,1.167 true 0.792,1.156 0.979,1.156 0.979,1.156 1.063,0.927 true 4.49,3.542 4.635,3.885 0.146,0.344 18 true i 2.292,0.135 2.438,0.479 0.146,0.344 18 true i 0.427,0.156 0.625,0.49 0.198,0.333 18 true ii 5.417,0.135 5.615,0.469 0.198,0.333 18 true ii 0.563,1.073 0.792,1.271 0.229,0.198 10 true *a 6.542,1.073 6.771,1.271 0.229,0.198 10 true *a 4.229,0.281 4.458,0.479 0.229,0.198 10 true *b 2.365,0.531 2.594,0.729 0.229,0.198 10 true *b 3.458,1.188 3.688,1.385 0.229,0.198 10 true *b 4.552,4.219 4.781,4.417 0.229,0.198 10 true *b
*a Guide *b Clamp
V113147

Install to Guide by Inserting to the End - -


i.

Connect the connector and attach the clamp.


ii.

Install the instrument panel reinforcement assembly with air conditioning unit assembly to the guide as shown in the illustration.

NOTICE:
·

Be careful not to damage the internal components of the instrument panel reinforcement assembly and air conditioning unit assembly on the glass etc. Only perform installation after first taking the appropriate actions.

·

Make sure that both parts are securely installed to the guide.





b.
E464402C01
0.531,3.292 0.771,3.479 0.24,0.188 10 true *a 0.198,1.938 0.438,2.125 0.24,0.188 10 true *a 6.104,2 6.344,2.188 0.24,0.188 10 true *a 6.146,3.302 6.385,3.49 0.24,0.188 10 true *a 5.26,3.865 5.5,4.052 0.24,0.188 10 true *b 0.865,1.26 1.104,1.448 0.24,0.188 10 true *c 3.885,1.156 4.125,1.344 0.24,0.188 10 true *c 5.604,1.26 5.844,1.448 0.24,0.188 10 true *d 1.677,4.125 1.917,4.313 0.24,0.188 10 true *e 5.729,3.604 6.229,3.896 0.5,0.292 18 true i, iv 6.667,2.073 7.146,2.375 0.479,0.302 18 true i, iv 6.688,3.042 7.156,3.323 0.469,0.281 18 true i, iv 0.813,2.083 1.292,2.375 0.479,0.292 18 true i, iv 1,2.99 1.458,3.281 0.458,0.292 18 true i, iv 0.76,0.167 1.26,0.458 0.5,0.292 18 true ii, v 5.375,0.146 5.875,0.427 0.5,0.281 18 true ii, v 2.125,3.854 2.719,4.146 0.594,0.292 18 true iii, vi
*a Bolt (A) *b Bolt (B)
*c Bolt (C) *d Bolt (D)
*e Nut - -


i.

Temporarily install the 4 bolts (A) and bolt (B).


ii.

Temporarily install the 2 bolts (C) and bolt (D).


iii.

Temporarily install the nut.


iv.

Tighten the 4 bolts (A) and bolt (B).

Torque:
Bolt (A) : 25 N*m (255 kgf*cm, 18 ft.*lbf)
Bolt (B) : 15 N*m (153 kgf*cm, 11 ft.*lbf)


v.

Tighten the 2 bolts (C) and bolt (D).

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


vi.

Tighten the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)



Hide 82141 6.CONNECT INSTRUMENT PANEL WIRE

Hide 55306A 7.INSTALL NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

a.
E465772C01
5.552,0.698 5.875,0.698 true 5.552,1.177 5.875,1.177 true 5.042,0.323 5.229,0.323 5.229,0.323 5.313,0.573 true 2.51,0.219 2.938,0.5 0.427,0.281 18 true i, iii 0.75,0.708 1.229,0.99 0.479,0.281 18 true ii, iv 4.844,0.708 5.042,1.01 0.198,0.302 18 true v 5.917,0.604 6.156,0.802 0.24,0.198 10 true *a 5.896,1.083 6.135,1.281 0.24,0.198 10 true *a 4.854,0.24 5.042,0.417 0.188,0.177 10 true *b 5.604,0.792 5.844,1.094 0.24,0.302 18 true vi 2.219,1.385 2.646,1.667 0.427,0.281 18 true i, iii
*a Clamp *b Guide


i.

Temporarily install the No. 1 instrument panel brace sub-assembly with the 2 nuts and bolt.


ii.

Temporarily install the screw.


iii.

Tighten the 2 nuts and bolt.

Torque:
Nut : 18 N*m (184 kgf*cm, 13 ft.*lbf)
Bolt : 16 N*m (163 kgf*cm, 12 ft.*lbf)


iv.

Tighten the screw.


v.

Attach the guide and connect the ground wire with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


vi.

Attach the clamp.



Hide 55307C 8.INSTALL NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

a.
E465771C01
5.052,1.177 5.406,1.177 true 5,0.74 5.354,0.74 true 5.583,0.552 5.688,0.323 5.688,0.323 5.854,0.323 true 0.76,0.26 1.198,0.552 0.438,0.292 18 true i, iii 2.51,0.802 3.01,1.083 0.5,0.281 18 true ii, iv 5.938,0.688 6.167,0.99 0.229,0.302 18 true v 4.781,0.635 4.99,0.823 0.208,0.188 10 true *a 4.833,1.073 5.042,1.26 0.208,0.188 10 true *a 5.844,0.24 6.052,0.427 0.208,0.188 10 true *b 5.094,0.813 5.354,1.115 0.26,0.302 18 true iv 1.01,1.396 1.448,1.688 0.438,0.292 18 true i, iii
*a Clamp *b Guide


i.

Temporarily install the No. 2 instrument panel brace sub-assembly with the nut and bolt.

NOTICE:

Check for the No. 2 instrument panel brace sub-assembly and air conditioner harness assembly do not interfere.



ii.

Temporarily install the screw.


iii.

Tighten the 2 nuts and bolt.

Torque:
Nut : 18 N*m (184 kgf*cm, 13 ft.*lbf)
Bolt : 16 N*m (163 kgf*cm, 12 ft.*lbf)


iv.

Tighten the screw.


v.

Attach the guide and connect the ground wire with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


vi.

Attach the clamp.



Hide 82213E 9.INSTALL HEATER BLOWER WIRE (w/ PTC Heater)

Hide 87201 10.INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

Hide 8598A 11.INSTALL DOOR CONTROL BATTERY (w/ Door Control Battery)

Hide 85940 12.INSTALL WINDSHIELD WIPER RELAY ASSEMBLY

Hide 82878 13.INSTALL ECU INTEGRATION BOX LH

Z101186

Click here(Click here)

Hide 82730G 14.INSTALL POWER DISTRIBUTION BOX ASSEMBLY

Z101186

Click here(Click here)

Hide 87212F 15.INSTALL REAR NO. 2 AIR DUCT

Hide 87212 16.INSTALL REAR NO. 1 AIR DUCT

Hide 87212H 17.INSTALL REAR NO. 4 AIR DUCT

a.
E464883C01
1.281,0.781 1.281,0.583 1.281,0.583 1.49,0.583 true 1.552,1.104 1.552,0.802 1.552,0.802 1.385,0.802 true 3.573,1 3.708,1.281 0.135,0.281 18 true i 3.635,1.438 3.854,1.74 0.219,0.302 18 true iii 1.063,0.167 1.26,0.438 0.198,0.271 18 true ii 1.5,0.479 1.729,0.677 0.229,0.198 10 true *a 1.458,1.115 1.688,1.313 0.229,0.198 10 true *b
*a Protrusion *b Cutout


i.

Insert the rear No. 4 air duct to the No. 2 air duct and attach the clip.


ii.

Align the cutout of the drain hose with the protrusion of the heater case and connect the drain hose.


iii.

Connect the drain hose to the cooler unit drain hose grommet.



Hide 87212K 18.INSTALL REAR NO. 6 AIR DUCT

Hide 87212G 19.INSTALL REAR NO. 3 AIR DUCT

a.
E464884C01
5.458,0.76 5.458,0.573 5.458,0.573 5.281,0.573 true 5.094,1.104 5.094,0.802 5.094,0.802 5.354,0.802 true 3.552,0.969 3.708,1.281 0.156,0.313 18 true i 3.427,1.417 3.635,1.729 0.208,0.313 18 true iii 4.771,0.167 4.958,0.458 0.188,0.292 18 true ii 5.031,0.458 5.26,0.656 0.229,0.198 10 true *a 4.99,1.125 5.219,1.323 0.229,0.198 10 true *b
*a Protrusion *b Cutout


i.

Insert the rear No. 3 air duct to the No. 1 air duct and attach the clip.


ii.

Align the cutout of the drain hose with the protrusion of the heater case and connect the drain hose.


iii.

Connect the drain hose to the cooler unit drain hose grommet.



Hide 87212J 20.INSTALL REAR NO. 5 AIR DUCT

Hide 88576C 21.INSTALL NO. 1 COOLER AIR DUCT

Hide 22.INSTALL TELEPHONE TRANSCEIVER ASSEMBLY WITH BRACKET (w/ Telematics Transceiver)

Hide 55084E 23.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

Hide 58510D 24.INSTALL FRONT FLOOR CARPET ASSEMBLY

Hide 88650N 25.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

Hide 62414A 26.INSTALL CENTER PILLAR LOWER GARNISH LH

Z101186

Click here(Click here)

Hide 67918D 27.INSTALL REAR DOOR SCUFF PLATE LH

Hide 62413A 28.INSTALL CENTER PILLAR LOWER GARNISH RH

a.

Use the same procedure described for the LH side.


Hide 67917C 29.INSTALL REAR DOOR SCUFF PLATE RH

Hide 73220 30.INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH (FLOOR ANCHOR)

Hide 73210 31.INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH (FLOOR ANCHOR)

a.

Use the same procedure described for the LH side.


Hide 73233 32.INSTALL OUTER LAP BELT ANCHOR COVER

Hide 45250 33.INSTALL STEERING COLUMN ASSEMBLY

Hide 83108 34.INSTALL METER MIRROR SUB-ASSEMBLY (w/ Headup Display)

Hide 55990B 35.INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY

Hide 37.INSTALL FRONT SEAT ASSEMBLY LH

Hide 38.INSTALL FRONT SEAT ASSEMBLY RH

a.

Use the same procedure described for the LH side.


Hide 39.INSTALL HOLE PLUG

Hide 88897K 40.INSTALL COOLER PIPE GROMMET

Hide 88710K 41.CONNECT NO. 3 AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

a.
E464869C01
0.542,0.135 0.823,0.49 0.281,0.354 18 false i 4.063,0.156 4.344,0.51 0.281,0.354 18 false ii 1.01,2.021 1.25,2.323 0.24,0.302 18 true iii 4.146,2.063 4.396,2.365 0.25,0.302 18 true iv
V113147

Rotate in this Direction - -


i.

Sufficiently apply compressor oil to a new O-rings and the fitting surface of the No. 3 air conditioning tube and accessory assembly.

Compressor Oil:

ND-OIL 8 or equivalent



ii.

Install the 2 O-rings to the No. 3 air conditioning tube and accessory assembly.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.



iii.

Connect the No. 3 air conditioning tube and accessory assembly and rotate the 1-point tightening plate as shown in the illustration.

NOTICE:
·

Do not apply excessive force to the No. 3 air conditioning tube and accessory assembly.

·

Make sure not to cut the O-ring while installing it. (Cut O-rings cannot be installed.)




iv.

Install the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)



Hide 87128 42.INSTALL HEATER GROMMET

Hide 87245A 43.CONNECT INLET HEATER WATER HOSE A

a.

for V35A-FTS:

E464810C01
2.99,3.573 2.771,3.573 2.771,3.573 2.385,3.188 true 1.844,2.854 1.688,2.51 1.688,2.51 1.313,2.51 true 2.208,3.292 2.01,3.583 2.01,3.583 1.74,3.583 true 5.448,3.01 5.094,3.01 5.094,3.01 4.854,2.688 true 1.51,0.125 1.792,0.479 0.281,0.354 18 false i 3.604,1.948 3.917,2.146 0.313,0.198 10 false *a 4.75,1.854 5,2.021 0.25,0.167 10 true *c 3.01,3.469 3.323,3.667 0.313,0.198 10 false *e 2.24,2.135 2.552,2.333 0.313,0.198 10 false *d 1.156,2.417 1.469,2.615 0.313,0.198 10 false *1 1.583,3.49 1.896,3.688 0.313,0.198 10 false *2 5.51,2.906 5.76,3.073 0.25,0.167 10 true *b 3.542,1.042 3.698,1.24 0.156,0.198 10 true A
*1 Inlet Heater Water Hose A *2 Hose Clip
*a View A *b Marking
*c Hose Clip Installation Angle (120° From Above the Vehicle) *d Hose Clip Installation Range (1 to 5 mm (0.0394 to 0.196 in.))
*e Stopper - -


i.

Connect the inlet heater water hose A with its marking facing upward and install the hose clip within the range shown in the illustration.

NOTICE:

Do not apply excessive force to the inlet heater water hose A.




b.

for F33A-FTV:

E471457C01
2.104,3.24 2.5,3.604 2.5,3.604 2.698,3.604 true 1.333,3.552 1.708,3.552 1.708,3.552 1.917,3.354 true 0.969,2.615 1.344,2.615 1.344,2.615 1.5,2.948 true 5.458,2.76 5.667,3.073 5.667,3.073 6.094,3.073 true 3.698,1.042 3.854,1.24 0.156,0.198 10 true A 4.354,1.948 4.667,2.146 0.313,0.198 10 false *a 5.375,1.906 5.688,2.104 0.313,0.198 10 true *c 1.813,2.188 2.125,2.385 0.313,0.198 10 false *d 6.146,2.969 6.458,3.167 0.313,0.198 10 false *b 0.823,2.531 1.135,2.729 0.313,0.198 10 false *1 1.156,3.458 1.469,3.656 0.313,0.198 10 false *2 2.729,3.51 3.042,3.708 0.313,0.198 10 false *e 1.292,0.167 1.573,0.521 0.281,0.354 18 false i
*1 Inlet Heater Water Hose A *2 Hose Clip
*a View A *b Marking
*c Hose Clip Installation Angle (90° From Above the Vehicle) *d Hose Clip Installation Range 20 mm (0.787 in.))
*e Stopper - -


i.

Connect the inlet heater water hose A with its marking facing upward and install the hose clip within the range shown in the illustration.

NOTICE:

Do not apply excessive force to the inlet heater water hose A.




Hide 87246A 44.CONNECT OUTLET HEATER WATER HOSE A

a.

for V35A-FTS:

E464811C01
2.99,3.573 2.771,3.573 2.771,3.573 2.385,3.188 true 1.844,2.854 1.688,2.51 1.688,2.51 1.313,2.51 true 2.208,3.292 2.01,3.583 2.01,3.583 1.74,3.583 true 5.448,3.01 5.094,3.01 5.094,3.01 4.854,2.688 true 1.51,0.125 1.792,0.479 0.281,0.354 18 false i 3.604,1.948 3.917,2.146 0.313,0.198 10 false *a 4.75,1.854 5,2.021 0.25,0.167 10 true *c 3.01,3.469 3.323,3.667 0.313,0.198 10 false *e 2.24,2.135 2.552,2.333 0.313,0.198 10 false *d 1.156,2.417 1.469,2.615 0.313,0.198 10 false *1 1.583,3.49 1.896,3.688 0.313,0.198 10 false *2 5.51,2.906 5.76,3.073 0.25,0.167 10 true *b 3.25,1.01 3.406,1.208 0.156,0.198 10 true A
*1 Outlet Heater Water Hose A *2 Hose Clip
*a View A *b Marking
*c Hose Clip Installation Angle (120° From Above the Vehicle) *d Hose Clip Installation Range (1 to 5 mm (0.0394 to 0.196 in.))
*e Stopper - -


i.

Connect the outlet heater water hose A with its marking facing upward and install the hose clip within the range shown in the illustration.

NOTICE:

Do not apply excessive force to the outlet heater water hose A.




b.

for F33A-FTV:

E471458C01
2.104,3.24 2.5,3.604 2.5,3.604 2.698,3.604 true 1.333,3.552 1.708,3.552 1.708,3.552 1.917,3.354 true 0.969,2.615 1.344,2.615 1.344,2.615 1.5,2.948 true 5.458,2.76 5.667,3.073 5.667,3.073 6.094,3.073 true 3.563,1.271 3.719,1.469 0.156,0.198 10 true A 4.365,1.927 4.677,2.125 0.313,0.198 10 false *a 5.375,1.906 5.688,2.104 0.313,0.198 10 true *c 1.813,2.188 2.125,2.385 0.313,0.198 10 false *d 6.146,2.969 6.458,3.167 0.313,0.198 10 false *b 0.823,2.531 1.135,2.729 0.313,0.198 10 false *1 1.156,3.458 1.469,3.656 0.313,0.198 10 false *2 2.729,3.51 3.042,3.708 0.313,0.198 10 false *e 1.406,0.125 1.688,0.479 0.281,0.354 18 false i
*1 Outlet Heater Water Hose A *2 Hose Clip
*a View A *b Marking
*c Hose Clip Installation Angle (90° From Above the Vehicle) *d Hose Clip Installation Range 20 mm (0.787 in.))
*e Stopper - -


i.

Connect the outlet heater water hose A with its marking facing upward and install the hose clip within the range shown in the illustration.

NOTICE:

Do not apply excessive force to the outlet heater water hose A.




Hide 55223A 45.CONNECT OUTER DASH PANEL INSULATOR

Hide 46.INSTALL WIRING HARNESS CLAMP BRACKET

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

Hide 51470C 47.CONNECT REAR ENGINE SIDE UNDER COVER ASSEMBLY LH

Hide 87237 48.INSTALL HEATER PIPING COVER (for V35A-FTS)

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)

Hide 87114E 49.INSTALL NO. 1 HEATER COVER (for F33A-FTV)

Torque:
9.8 N*m (100 kgf*cm, 7 ft.*lbf)

Hide 50.INSTALL FRONT WIPER MOTOR AND LINK

Hide 51.ADD ENGINE COOLANT

Hide 53. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

Hide 53292A 57.INSTALL UPPER RADIATOR SUPPORT SEAL

Hide 11209 58.INSTALL V-BANK COVER SUB-ASSEMBLY (for V35A-FTS)

Hide 12601B 59.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (for F33A-FTV)