| *A | w/ DPF | *B | w/ Urea SCR System |
| *1 | Urea Injector Clamp | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *A | w/ DPF | *B | w/ Urea SCR System |
|
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with SST or union nut wrench |
| *A | w/ EGR System | *B | w/ Urea SCR System |
|
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with union nut wrench |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 27 | EGR COOLER INSULATOR | 25689 | - | - | - |
| 28 | WATER BY-PASS PIPE ASSEMBLY | 16260B | - | - | - |
| 29 | NO. 2 WATER BY-PASS PIPE | 16278K | - | - | - |
| 30 | INTERCOOLER INSULATOR | 17951 | - | - | - |
| 31 | NO. 1 NITROGEN OXIDES SENSOR | 89463C | - | - | - |
| 32 | EXHAUST GAS TEMPERATURE SENSOR | 89425 | - | - | - |
| 33 | EXHAUST FUEL ADDITION INJECTOR ASSEMBLY | 23710B | - | - | - |
| 34 | INTERCOOLER ASSEMBLY | 17940D | - | - | - |
| 35 | FRONT EXHAUST PIPE ASSEMBLY | 17410 | - | - | - |
| *A | w/ DPF | *B | w/ Urea SCR System |
| *C | w/ EGR System | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with union nut wrench |
| ● | Non-reusable part | - | - |
23720 1.INSTALL UREA INJECTOR ASSEMBLY (w/ Urea SCR System)
77697C 2.INSTALL INSULATOR (w/ Urea SCR System)
17179 3.INSTALL NO. 2 EXHAUST MANIFOLD GASKET
17173B 4.INSTALL EXHAUST MANIFOLD GASKET
25051 5.INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
Install the 2 stud bolts.
|
Bolt A |
|
Nut |
|
Bolt B | - | - |
Temporarily install the 4 new bolt A, the 2 new nuts and the 2 bolt B.
Temporarily install the 4 bolt A and 2 nuts in the order shown in the illustration to temporarily install the exhaust manifold converter sub-assembly.
Temporarily install the 2 bolts of B.
Tighten the 4 bolts of A and 2 nuts in the order shown in the illustration.
Tighten the 2 bolts of B.
17946 6.INSTALL NO. 2 INTERCOOLER SUPPORT BRACKET
17273A 7.INSTALL TURBO INSULATOR STAY
23901H 8.INSTALL FUEL TUBE SUB-ASSEMBLY (w/ DPF)
162A1A 9.INSTALL TURBO WATER PIPE STAY
17947B 10.INSTALL NO. 3 INTERCOOLER SUPPORT BRACKET
89425A 11.INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR (w/ EGR System)
89463C 12.INSTALL NO. 1 NITROGEN OXIDES SENSOR (w/ Urea SCR System)
17117A 13.INSTALL INTAKE PIPE INSULATOR
1629D 15.CONNECT NO. 17 WATER BY-PASS HOSE (w/ DPF)
1629B 16.CONNECT NO. 15 WATER BY-PASS HOSE (w/ DPF)
23720 17.CONNECT UREA INJECTOR ASSEMBLY (w/ Urea SCR System)
17875 18.INSTALL INTAKE AIR CONNECTOR PIPE
| *a | Retainer | - | - |
Insert the intake air connector pipe until the retainer is locked.
17872 19.INSTALL INTAKE AIR CONNECTOR BRACKET
|
Bolt A |
|
Bolt B |
Temporarily install the intake air connector bracket with the 2 bolts.
Tighten the bolt A until all of the threads make contact.
Tighten the bolt B.
Tighten the bolt A.
17877 20.INSTALL NO. 2 INTAKE AIR CONNECTOR PIPE
| *a | Retainer | - | - |
Insert the No. 2 intake air connector pipe until the retainer is locked.
17873 21.INSTALL NO. 2 INTAKE AIR CONNECTOR BRACKET
|
Bolt A |
|
Bolt B |
Temporarily install the No. 2 intake air connector bracket with the 2 bolts.
Tighten the bolt A until all of the threads make contact.
Tighten the bolt B.
Tighten the bolt A.
17113E 22.INSTALL NO. 1 INTAKE PIPE
25627 23.INSTALL EGR VALVE GASKET (w/ EGR System)
25614 24.INSTALL NO. 4 EGR PIPE (w/ EGR System)
89425G 25.INSTALL EGR GAS TEMPERATURE SENSOR (w/ EGR System)
25613 26.INSTALL NO. 3 EGR PIPE (w/ EGR System)
25689 27.INSTALL EGR COOLER INSULATOR
16260B 28.INSTALL WATER BY-PASS PIPE ASSEMBLY (w/ EGR System)
16278K 29.INSTALL NO. 2 WATER BY-PASS PIPE
17951 30.INSTALL INTERCOOLER INSULATOR
89463C 31.CONNECT NO. 1 NITROGEN OXIDES SENSOR (w/ Urea SCR System)
89425 32.INSTALL EXHAUST GAS TEMPERATURE SENSOR (w/ DPF)
23710B 33.INSTALL EXHAUST FUEL ADDITION INJECTOR ASSEMBLY (w/ DPF)
17940D 34.INSTALL INTERCOOLER ASSEMBLY
17410 35.INSTALL FRONT EXHAUST PIPE ASSEMBLY