Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › INTELLIGENT CLEARANCE SONAR SYSTEM
RM3210E _56 Audio / Visual / Telematics _047512 PARK ASSIST / MONITORING _0244854 INTELLIGENT CLEARANCE SONAR SYSTEM T

PARK ASSIST / MONITORING  INTELLIGENT CLEARANCE SONAR SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



General
Symptom Suspected Area Link
System does not operate at all TOYOYA parking assist-sensor system Click here
CAN communication system Click here
Clearance warning ECU assembly Click here
System cannot be turned off CAN communication system Click here
Clearance warning ECU assembly Click here

Sonar Function
Symptom Suspected Area Link
Detection function operates when the operating conditions are not met Hybrid control system Click here
Clearance warning ECU assembly Click here
Detection function operates when vehicle is not within the required speed range (speedometer not malfunctioning) Clearance warning ECU assembly Click here

Buzzer Function
Symptom Suspected Area Link
Intelligent clearance sonar system is normal but buzzer operation is intermittent Check that the temporary mute function is not operating -
Proceed to "Clearance Warning Buzzer Circuit" Click here
Clearance warning ECU assembly Click here
Meter circuit plate Click here

Display Function
Symptom Suspected Area Link
While the ICS system is operating, no ICS notifications are displayed on the multi-information display. Clearance warning ECU assembly Click here
Meter circuit plate Click here
While the ICS system is operating, no ICS notifications are displayed on the headup display.* Clearance warning ECU assembly Click here
Combination meter mirror ECU Click here
"ICS Malfunction Visit Your Dealer" is displayed Meter circuit plate Click here
Clearance warning ECU assembly Click here
"ICS Unavailable" is displayed Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point Click here
CAN communication system Click here
Meter circuit plate Click here
Clearance warning ECU assembly Click here
ICS does not operate when there is a possibility of a collision (Warning message "ICS Unavailable" not displayed) Check the installation of the ultrasonic sensors (front) Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front) Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly Click here
ICS control operates when there is no possibility of a collision Check the installation of the ultrasonic sensors (front) Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front) Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly Click here
ICS control cannot be turned off (ICS OFF indicator does not illuminate) Meter circuit plate (LED): Perform Active Test (Indicat. ICS OFF LCD) Click here
Steering pad switch assembly Click here
Clearance warning ECU assembly Click here
ICS OFF indicator blinks Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point Click here

*: w/ Headup Display System