Display Function
Symptom
| Suspected Area
| See page
|
Pressing power switch does not turn on system
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Black screen (No image appears on audio screen)
| Proceed to "Black Screen"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Display does not dim (does not change to night screen) with tail switch on
| Proceed to "Display does not Dim when Light Control Switch is Turned ON"
|
Click here
|
Proceed to "Illumination Circuit"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Power does not turn off (Screen remains on)
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Screen is distorted
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Screen flicker or color distortion
| Proceed to "Screen Flicker or Color Distortion"
|
Click here
|
Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Audio function switches can be operated while vehicle being driven
| Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
FM or AM Radio Function
Symptom
| Suspected Area
| See page
|
Radio broadcast cannot be received or poor reception
| Proceed to "Radio Broadcast cannot be Received or Poor Reception"
|
Click here
|
Radio broadcast can be received but radio station cannot be displayed (Some radio stations do not provide their name information)
| Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers
| Check the volume settings
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Radio broadcast can be received but station list cannot be displayed
| Wait for 120 seconds in radio mode, and select the "Refresh" switch on the station list screen
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Radio broadcast can be received but station list cannot be displayed
| Select the "Refresh" switch on the station list screen
| -
|
Wait for 10 minutes with the ignition switch ACC, and select the "Refresh" switch on the station list screen again
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
After the voice recognition function or handsfree function is turned off, the cache radio does not operate
| Check that the cache radio setting is on
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
When the cache radio is playing, sound is interrupted, sound cannot be heard or sound quality is poor
| Check if similar symptoms occur when receiving conventional FM/AM radio broadcasts
| -
|
Check if similar symptoms occur when receiving other broadcasts
| -
|
Move the vehicle to a place where the reception sensitivity is good and check again
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
When the cache radio is playing, sound can be heard, but no information is displayed (some radio stations do not provide their name information)
| Check if similar symptoms occur when receiving other broadcasts
| -
|
Move the vehicle to a place where the reception sensitivity is good and check again
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
HD Radio Function (w/ HD Radio Function)
Symptom
| Suspected Area
| See page
|
Only "HD Radio" stations cannot be heard or selected, or their analog or digital sound cannot be changed
| Check the "HD Radio" settings
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"iPod" tagging function cannot be used
| Check if a message indicating that the capacity for tag information is full is displayed
| -
|
Check that the cache radio is not playing (when the cache radio is playing, "iPod" tagging function cannot be used)
| -
|
Proceed to "USB Audio System Recognition/ Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
When the HD radio is playing, cover art may not be displayed
| When a song unregistered to the Gracenote CDDB is playing or cover art information is not provided by the broadcast station, its cover art cannot be displayed
| -
|
When the HD radio is playing, cover art cannot be displayed
| Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Broadcast station logo cannot be displayed
| Check if similar symptoms occur when receiving other broadcasts
| -
|
Check if similar symptoms occur with another vehicle
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
SPS channel cannot be selected
| Check that HD radio FM mode is selected
| -
|
After pressing the "Refresh" switch, check that the SPS channel is on the station list
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
When the SPS channel is selected, sound cannot be heard
| After pressing the "Refresh" switch, select the SPS channel on the station list
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
SDARS System Function (w/ SDARS System)
Symptom
| Suspected Area
| See page
|
Satellite radio broadcast cannot be received or reception is bad
| Proceed to "Satellite Radio Broadcast cannot be Received"
|
Click here
|
Stereo component tuner assembly (for Column Shift Type)
|
Click here
|
Stereo component tuner assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Satellite radio cannot receive pay-type broadcasts
| Proceed to "Satellite Radio Broadcast cannot be Received"
|
Click here
|
Stereo component tuner assembly (for Column Shift Type)
|
Click here
|
Stereo component tuner assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Satellite radio broadcast cannot be selected or after selecting broadcast, broadcast cannot be added into memory
| Proceed to "Satellite Radio Broadcast cannot be Received"
|
Click here
|
Proceed to "Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory"
|
Click here
|
Stereo component tuner assembly (for Column Shift Type)
|
Click here
|
Stereo component tuner assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Satellite radio can be displayed but radio broadcast cannot be heard from speakers
| Check the volume settings
| -
|
Proceed to "Satellite Radio Broadcast cannot be Received"
|
Click here
|
Stereo component tuner assembly (for Column Shift Type)
|
Click here
|
Stereo component tuner assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Broadcast station logo cannot be displayed
| Proceed to "Satellite Radio Broadcast cannot be Received"
|
Click here
|
Proceed to "Data Signal Circuit between Radio Receiver and Extension Module"
|
Click here
|
Stereo component tuner assembly (for Column Shift Type)
|
Click here
|
Stereo component tuner assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Satellite radio text information cannot be displayed
| Proceed to "Satellite Radio Broadcast cannot be Received"
|
Click here
|
Stereo component tuner assembly (for Column Shift Type)
|
Click here
|
Stereo component tuner assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Satellite radio broadcast station cannot be selected (scan cannot be performed)
| Proceed to "Satellite Radio Broadcast cannot be Received"
|
Click here
|
Stereo component tuner assembly (for Column Shift Type)
|
Click here
|
Stereo component tuner assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
When the satellite radio is playing, some cover art may not be displayed
| When a song unregistered to the Gracenote CDDB is playing, its cover art cannot be displayed
| -
|
When the satellite radio is playing, cover art cannot be displayed
| Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
CD Player Function
Symptom
| Suspected Area
| See page
|
Disc cannot be played or player does not function with disc
| Proceed to "Disc Player Outline" in System Description and check if the disc is compatible with the disc player
|
Click here
|
Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Disc cannot be inserted/played or disc is ejected right after insertion
| Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "Disc cannot be Inserted or is Ejected Right After Insertion"
|
Click here
|
Disc cannot be ejected
| Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "Disc cannot be Ejected"
|
Click here
|
Disc sound skips
| Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "CD/DVD Sound Skips"
|
Click here
|
Sound quality is bad only when disc is played (volume is too low)
| Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "Sound Quality is Bad Only when Disc is Played (Volume is Too Low)"
|
Click here
|
When disc is playing, some cover art is not displayed
| When a song unregistered to the Gracenote CDDB is playing, its cover art cannot be displayed
| -
|
When disc is playing, cover art cannot be displayed
| Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Album cover art cannot be displayed
| Check that Display Cover Art on the disc settings screen is set to on
| -
|
Check if similar symptoms occur with another vehicle
| -
|
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio and display receiver assembly, update the Gracenote database to the latest version.
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" Hands-free Function
Symptom
| Suspected Area
| See page
|
"Bluetooth" is inoperative (In-vehicle device cannot be recognized by the cellular phone)
| Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" compatible cellular phone cannot be registered
| Proceed to "Cellular Phone Registration Failure"
|
Click here
|
"Bluetooth" compatible cellular phone cannot be connected
| Check that no other cellular phone is connected as a hands-free device
| -
|
Bring the cellular phone near the in-vehicle device and reconnect it
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually)
| Check that "Bluetooth" automatic connection setting of the in-vehicle device is on
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" compatible cellular phone connection is disconnected
| Bring the cellular phone near the in-vehicle device and check if it is reconnected
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Message that prompts to check the cellular phone is displayed
| Bring the cellular phone near the in-vehicle device and check if it is reconnected
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
When the ignition switch is turned to ACC, instructions for checking the connection condition between the invehicle device and cellular phone are displayed
| Turn the cellular phone connection conformation display on the in-vehicle device off
| -
|
Phonebook data cannot be transferred
| Check that the phonebook automatic transfer setting of the in-vehicle device is on
| -
|
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required)
| -
|
Check that no applications on the cellular phone are running
| -
|
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation
| -
|
Transfer phonebook data manually
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Phonebook data is cleared
| Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Phonebook data cannot be edited
| Check that the phonebook data automatic transfer setting is off
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
All the transferred phonebook data is sorted to "Other"
| Check that no applications on the cellular phone are operating
| -
|
Check that phonebook data in the cellular phone is not stored to the SIM card
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Explain to the customer that all the transferred phonebook data may be stored to "Other" depending on cellular phone
| -
|
Cellular phone cannot make outgoing/ incoming calls
| Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again
| -
|
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth"
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Other caller's voice is interrupted by noise or sound quality is poor
| Check the receiving voice volume (if it is too high, voice may sound distorted)
| -
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Other caller's voice cannot be heard
| Check that reception voice volume is not set to minimum
| -
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Caller's voice (your voice) is interrupted by noise or sound quality is poor
| Check the transmitting voice volume (if it is too high, voice may sound distorted)
| -
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
Other caller cannot hear your voice
| When talking on the cellular phone, check that the mute button is not pressed
| -
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
No notification when a new SMS/MMS/e-mail has been received
| Check the SMS/MMS/e-mail notification settings on the cellular phone and the radio and display receiver assembly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Received SMS/MMS/e-mail cannot be read
| Check the SMS/MMS/e-mail transfer settings on the cellular phone and the radio and display receiver assembly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
SMS/MMS/e-mail cannot be replied to
| Move the vehicle into a cellular phone service area, and check the operation of the radio and display receiver assembly and cellular phone
| -
|
Check that the cellular phone can send an SMS/MMS/e-mail
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" Audio Function
Symptom
| Suspected Area
| See page
|
Portable player cannot be registered
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player cannot be connected manually/automatically
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth"
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Sound of portable player cannot be heard from speakers, or sound is low
| Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player does not play even after "Bluetooth" audio mode is selected
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player does not play
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Track information such as track number, track name, elapsed play time and playlist is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Battery condition of portable player is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"Bluetooth" signal condition is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Noise occurs or sound skips when portable player plays
| Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Registered device cannot be deleted
| Proceed to "Registered Device cannot be Deleted"
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
USB Audio System Function
Symptom
| Suspected Area
| See page
|
USB audio system sound cannot be heard or sound quality is bad (USB connector is used)
| Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
USB device or "iPod" is not recognized
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Track information such as track, artist and album names is not displayed
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
USB device or "iPod" is recognized but cannot play, or can play but not in a sorted order
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Album cover art cannot be displayed
| Check that Display Cover Art on the "iPod" or USB Settings screen is set to
| -
|
Check if similar symptoms occur with another vehicle
| -
|
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the radio and display receiver assembly, update the Gracenote database to the latest version.
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
User set album cover art cannot be displayed
| Check if the priority display of Gracenote database album cover art setting is off
| -
|
Check that a JPEG file is used for the album cover art registered to the music data in the USB device or "iPod" - Radio and display receiver assembly
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
"iPod" battery cannot be charged
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Customize Startup Image or Screen Off Image Function
Symptom
| Suspected Area
| See page
|
Screen cannot be changed to UIC setting screen
| Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Thumbnails for opening image setting or screen off image setting do not update when USB device is connected
| Check that the USB device was not disconnected while transferring an image
| -
|
Check that the screen was not changed to another function menu while transferring an image
| -
|
Proceed to "USB Audio System Recognition/ Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Transfer button cannot be pressed
| Check that a USB device is connected
| -
|
Check that the USB device is not in use (USB audio system is playing etc.)
| -
|
Proceed to "USB Audio System Recognition/ Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Image data in USB device cannot be displayed
| Check that the designated folder name is used
| -
|
Check that the file extension of the data is JPG or JPEG
| -
|
Check that the file name is 32 characters or less and available language is used
| -
|
Check that the image data size is 10 MB or less
| -
|
Check that the file system of the USB device is FAT16 or FAT32
| -
|
Proceed to "USB Audio System Recognition/ Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Set opening image or screen off image is not displayed
| Check if it is the first start-up after disconnecting and reconnecting the +B terminal
| -
|
Set the opening image or screen off image again
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Stored image cannot be deleted
| Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Message indicating that USB device cannot be accessed is displayed
| Check that the USB device has not been disconnected while the audio and visual system is recognizing it
| -
|
Proceed to "USB Audio System Recognition/ Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly (for Column Shift Type)
|
Click here
|
No. 1 stereo jack adapter assembly (for Floor Shift Type)
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Thumbnail images for opening image or screen off image are not displayed on setting screen
| Check if it is the first start-up after disconnecting and reconnecting the +B terminal
| -
|
Set the opening image or screen off image again
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Image cannot be set for opening image or screen off image on setting screen
| Set the opening image or screen off image again
| -
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Entune Function (w/ Entune Function)
Symptom
| Suspected Area
| See page
|
An Entune system error message is displayed on the screen
| Follow on screen instructions
| -
|
Proceed to "Confirm Cellular Phone Functionality"
|
Click here
|
Proceed to "Confirm Vehicle Headunit Functionality"
|
Click here
|
Proceed to "Entune Reset Procedure" in Operation Check
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Entune apps and services are not operating as expected
| Proceed to "Confirm Cellular Phone Functionality"
|
Click here
|
Proceed to "Confirm Vehicle Headunit Functionality"
|
Click here
|
Proceed to "Entune Reset Procedure" in Operation Check
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Entune voice recognition is not possible (voice recognition on the audio and visual system is normal)
| Proceed to "Confirm Cellular Phone Functionality"
|
Click here
|
Proceed to "Confirm Vehicle Headunit Functionality"
|
Click here
|
Proceed to "Entune Reset Procedure" in Operation Check
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|
Poor sound quality of Entune system
| Confirm that cellular phone handset volume is turned up
| -
|
Confirm that adequate signal is maintained during driving.
| -
|
Proceed to "Confirm Cellular Phone Functionality
|
Click here
|
Proceed to "Confirm Vehicle Headunit Functionality"
|
Click here
|
Proceed to "Entune Reset Procedure" in Operation Check
|
Click here
|
Radio and display receiver assembly (for Column Shift Type)
|
Click here
|
Radio and display receiver assembly (for Floor Shift Type)
|
Click here
|