46430
1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Gasoline Model TMC Made)
Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
46430
2.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for HV Model TMC Made)
Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
46430
3.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for TMMF, TMMCZ Made)
Engage the claw to install the No. 3 parking brake cable assembly.
Install the No. 3 parking brake cable assembly with the 3 bolts and nut.
46420
4.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY (for Gasoline Model TMC Made)
Install the No. 2 parking brake cable assembly with the 5 bolts and nut.
46420
5.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY (for HV Model TMC Made)
Install the No. 2 parking brake cable assembly with the 5 bolts and nut.
46420
6.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY (for TMMF, TMMCZ Made)
Engage the claw to install the No. 2 parking brake cable assembly.
Install the No. 2 parking brake cable assembly with the 4 bolts and nut.
77606
7.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for Gasoline Model)
77606
8.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for HV Model)
58153
9.INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR (for TMC Made)
58153
10.INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR (for TMMF, TMMCZ Made)
58151
11.INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR (for TMMF, TMMCZ Made)
57628E
12.INSTALL REAR FLOOR SIDE MEMBER COVER LH (w/ Cover)
57627G
13.INSTALL REAR FLOOR SIDE MEMBER COVER RH (w/ Cover)
Use the same procedure as for the LH side.
58166A
14.INSTALL FRONT FLOOR COVER LH (w/ Cover)
58165C
15.INSTALL FRONT FLOOR COVER RH (w/ Cover)
Use the same procedure as for the LH side.
17410
16.INSTALL FRONT EXHAUST PIPE ASSEMBLY (for 1KR-FE)
17410
17.INSTALL FRONT EXHAUST PIPE ASSEMBLY (for M15A-FKS)
17410
18.INSTALL FRONT EXHAUST PIPE ASSEMBLY (for M15A-FXE)
57543C
19.INSTALL CENTER NO. 1 FLOOR BRACE (for TMMF, TMMCZ Made)
51447D
20.INSTALL CENTER NO. 4 ENGINE UNDER COVER (for TMC Made)
51447D
21.INSTALL CENTER NO. 4 ENGINE UNDER COVER (for TMMF, TMMCZ Made)
04495
22.INSTALL REAR BRAKE SHOE KIT (for TMC Made)
04495
23.INSTALL REAR BRAKE SHOE KIT (for TMMF, TMMCZ Made)
24.ADJUST PARKING BRAKE LEVER TRAVEL
58857A
25.INSTALL UPPER NO. 1 CONSOLE SUPPORT BRACKET (for TMC Made)
58903A
26.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY (for TMC Made)
58911A
27.INSTALL NO. 1 BOX SIDE PANEL (for TMC Made)
58912C
28.INSTALL NO. 2 BOX SIDE PANEL (for TMC Made)
58903A
29.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY (for Gasoline Model TMMF, TMMCZ Made)
58857A
30.INSTALL UPPER NO. 1 CONSOLE SUPPORT BRACKET (for HV Model TMMF, TMMCZ Made)
58911A
31.INSTALL NO. 1 BOX SIDE PANEL (for HV Model TMMF, TMMCZ Made)
58912C
32.INSTALL NO. 2 BOX SIDE PANEL (for HV Model TMMF, TMMCZ Made)
33.INSPECT FOR EXHAUST GAS LEAK
for 1KR-FE:
Click hereEngine / Hybrid System>1KR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION
for M15A-FKS:
Click hereEngine / Hybrid System>M15A-FKS (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION
for M15A-FXE:
Click hereEngine / Hybrid System>M15A-FXE (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION
34.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for HV Model TMC Made)
35. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL (for HV Model TMC Made)
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART