Display Function
Symptom
| Suspected Area
| See page
|
Black screen (no image appears on the screen)
| Proceed to "Black Screen"
|
Click here
|
Proceed to "Check Software Error History" in Operation Check
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Display does not dim (does not change to night screen) with tail switch on
| Proceed to "Display does not Dim when Light Control Switch is Turned ON"
|
Click here
|
Proceed to "Illumination Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Power does not turn off (screen remains on)
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Screen is distorted
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Screen flicker or color distortion
| Proceed to "Screen Flicker or Color Distortion"
|
Click here
|
Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Parking brake switch signal does not change in vehicle signal check mode
| Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Reverse signal does not change in vehicle signal check mode
| Proceed to "Reverse Signal Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
General Audio Function
Symptom
| Suspected Area
| See page
|
Pressing power switch does not turn on system
| Proceed to "Radio Receiver Power Source Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
No sound can be heard from speakers
| Proceed to "No Sound can be Heard from Speakers"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Abnormal noise occurs
| Proceed to "Noise Occurs"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Sound quality is bad in all modes (volume is too low)
| Check that the ASL function is off
| -
|
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
ASL does not function
| Check that the ASL function is on
| -
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Voice guidance does not function
| Proceed to "Voice Guidance does not Function"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Disc Player Function
Symptom
| Suspected Area
| See page
|
Disc cannot be played or player does not function with disc
| Proceed to "Disc Player Outline" in System Description and check if the disc is compatible with the disc player
|
Click here
|
Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Disc cannot be inserted/played or disc is ejected right after insertion
| Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "Disc cannot be Inserted or Ejected Right After Insertion"
|
Click here
|
Disc cannot be ejected
| Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "Disc cannot be Ejected"
|
Click here
|
Disc sound skips
| Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "CD/DVD Sound Skips"
|
Click here
|
While vehicle is stopped, DVD cannot be viewed even when parking brake is set (parking brake switch is on)*
| Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
Radio receiver assembly
|
Click here
|
Screen color is poor only when watching a DVD*
| Change the color settings on the screen adjustment screen
| -
|
Replace the disc with a known good one and check that the malfunction disappears
| -
|
Radio receiver assembly
|
Click here
|
Sound quality is bad only when disc is played (volume is too low)
| Change the sound setting on the adjustment screen
| -
|
Proceed to "Check Optical Disc Error History" in Operation Check
|
Click here
|
Proceed to "Sound Quality is Bad Only when disc is Played (Volume is Too Low)"
|
Click here
|
"Bluetooth" Hands-free Function
Symptom
| Suspected Area
| See page
|
"Bluetooth" is inoperative (in-vehicle device cannot be recognized by the cellular phone)
| Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" compatible cellular phone cannot be registered
| Proceed to "Cellular Phone Registration Failure"
|
Click here
|
"Bluetooth" compatible cellular phone cannot be connected
| Check that no other cellular phone is connected as a hands-free device
| -
|
Bring the cellular phone near the in-vehicle device and reconnect it
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually)
| Check that "Bluetooth" automatic connection setting of the in-vehicle device is on
| -
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" compatible cellular phone connection is disconnected
| Bring the cellular phone near the in-vehicle device and check if it is reconnected
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Message that prompts to check the cellular phone is displayed
| Bring the cellular phone near the in-vehicle device and check if it is reconnected
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed
| Turn the cellular phone connection conformation display on the in-vehicle device off
| -
|
Cellular phone cannot make outgoing/ incoming calls
| Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again
| -
|
Check that the cellular phone can make outgoing/ incoming calls properly when not connected via "Bluetooth"
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Other caller's voice is interrupted by noise or sound quality is poor
| Check the receiving voice volume (if it is too high, voice may sound distorted)
| -
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Other caller's voice cannot be heard
| Check that reception voice volume is not set to minimum
| -
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Caller's voice (your voice) is interrupted by noise or sound quality is poor
| Check the transmitting voice volume (if it is too high, voice may sound distorted)
| -
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Other caller cannot hear your voice
| When talking on the cellular phone, check that the mute button is not pressed
| -
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
| -
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
Click here
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
No notification when a new SMS/MMS/e-mail has been received*
| Check the SMS/MMS/e-mail notification settings on the cellular phone and the radio and display receiver assembly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Received SMS/MMS/e-mail cannot be read*
| Check the SMS/MMS/e-mail transfer settings on the cellular phone and the radio and display receiver assembly
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
SMS cannot be replied to*
| Move the vehicle into a cellular phone service area, and check the operation of the radio and display receiver assembly and cellular phone
| -
|
Check that the cellular phone can send an SMS/MMS/e-mail
| -
|
Proceed to "Cellular Phone Inspection"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" Audio Function
Symptom
| Suspected Area
| See page
|
Portable player cannot be registered
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player cannot be connected manually/automatically
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth"
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Sound of portable player cannot be heard from speakers, or sound is low
| Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player does not play even after "Bluetooth" audio mode is selected
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player does not play
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Track information such as track number, track name, elapsed play time and playlist is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Operation switches for portable player such as play, pause, repeat and random are not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Battery condition of portable player is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
"Bluetooth" signal condition is not displayed
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Portable player cannot pause, select file, fast forward, fast rewind, play at random
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Noise occurs or sound skips when portable player plays
| Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Registered device cannot be deleted
| Proceed to "Registered Device cannot be Deleted"
|
Click here
|
Radio and display receiver assembly
|
Click here
|
USB Audio System Function
Symptom
| Suspected Area
| See page
|
USB audio system sound cannot be heard or sound quality is bad (USB connector is used)
| Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Radio and display receiver assembly
|
Click here
|
USB device or "iPod" is not recognized
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Track information such as track, artist and album names is not displayed
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Radio and display receiver assembly
|
Click here
|
USB device or "iPod" is recognized but cannot play or play in a sorted order
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Radio and display receiver assembly
|
Click here
|
Album cover art cannot be displayed
| Check that display cover art on the USB device or "iPod" settings screen is set to on
| -
|
Check if similar symptoms occur with another vehicle
| -
|
Radio and display receiver assembly
|
Click here
|
User set album cover art cannot be displayed
| Radio and display receiver assembly
|
Click here
|
"iPod" battery cannot be charged
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Radio and display receiver assembly
|
Click here
|