Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2014.09–2016.05
RM24M0E _56 Audio / Visual / Telematics _059588 NAVIGATION / MULTI INFO DISPLAY _0292199 NAVIGATION SYSTEM T

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  PROBLEM SYMPTOMS TABLE  


NOTICE:

When replacing the navigation receiver assembly, perform vehicle contract setting (See page Audio / Visual / Telematics>G-BOOK>G-BOOK SYSTEM>REGISTRATION).


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Display Function
Symptom Suspected Area See page
Pressing power switch does not turn on system. Proceed to "Navigation Receiver Assembly Power Source Circuit" (Click here)
Navigation receiver assembly (Click here)
Black screen (No image appears on navigation/audio screen.) Proceed to "Black Screen" (Click here)
Navigation receiver assembly (Click here)
Display does not dim (does not change to night screen) with tail switch on. Proceed to "Display does not Dim when Light Control Switch is Turned ON" (Click here)
Proceed to "Illumination Circuit" (Click here)
Navigation receiver assembly (Click here)
Power does not turn off. (Screen remains on.) Proceed to "Navigation Receiver Assembly Power Source Circuit" (Click here)
Navigation receiver assembly (Click here)
Screen is distorted. Proceed to "Navigation Receiver Assembly Power Source Circuit" (Click here)
Navigation receiver assembly (Click here)
Screen flicker or color distortion Proceed to "Screen Flicker or Color Distortion" (Click here)
Proceed to "Navigation Receiver Assembly Power Source Circuit" (Click here)
Navigation receiver assembly (Click here)

Panel Switch and Touch Switch Function
Symptom Suspected Area See page
Illumination for panel switches does not come on with tail switch on. Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON" (Click here)
Proceed to "Illumination Circuit" (Click here)
Navigation receiver assembly (Click here)
Panel switches do not function. Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Navigation Receiver Assembly Power Source Circuit" (Click here)
Navigation receiver assembly (Click here)
Touch panel switch does not function. Proceed to "Touch Panel Switch does not Function" (Click here)
Proceed to "Navigation Receiver Assembly Power Source Circuit" (Click here)
Navigation receiver assembly (Click here)
The handwriting input screen is not displayed or potential matches for the character currently being entered and potential matches for the next character are not displayed. Navigation receiver assembly (Click here)
Navigation function switches can be operated while vehicle is driving. Proceed to "Parking Brake Switch Circuit" (Click here)
Navigation receiver assembly (Click here)

Steering Pad Switch Function
Symptom Suspected Area See page
System cannot be operated by steering pad switch. Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Steering Pad Switch Circuit" (Click here)
Navigation receiver assembly (Click here)
Illumination for steering pad switch does not come on with tail switch on. Proceed to "Illumination Circuit" (Click here)

Navigation Function
Symptom Suspected Area See page
GPS mark is not displayed. Proceed to "GPS Mark is not Displayed" (Click here)
Navigation antenna assembly (Click here)
Navigation receiver assembly (Click here)
Date and time on navigation screen is different from actual date and time. Proceed to "GPS Mark is not Displayed" (Click here)
Navigation antenna assembly (Click here)
Navigation receiver assembly (Click here)
Vehicle position mark deviates from correct position and does not return to correct position. Proceed to "GPS Mark is not Displayed" (Click here)
Navigation antenna assembly (Click here)
Navigation receiver assembly (Click here)
Cursor or map rotates when vehicle is stopped. Proceed to "Cursor or Map Rotates when Vehicle Stopped" (Click here)
Navigation receiver assembly (Click here)
Vehicle position mark moves in the opposite direction to the vehicle. Proceed to "Cursor or Map Rotates when Vehicle Stopped" (Click here)
Proceed to "Reverse Signal Circuit" (Click here)
Navigation receiver assembly (Click here)
Vehicle position mark deviates from and returns to correct position repeatedly even though GPS mark is displayed. Proceed to "GPS Mark is not Displayed" (Click here)
Drive the vehicle for sensor learning. (At a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more.) -
Navigation antenna assembly (Click here)
Navigation receiver assembly (Click here)
Vehicle position mark moves slow or fast. Proceed to "GPS Mark is not Displayed" (Click here)
Navigation antenna assembly (Click here)
Navigation receiver assembly (Click here)
Voice guidance does not function. Proceed to "Voice Guidance does not Function" (Click here)
Proceed to "Speaker Circuit" (Click here)
Navigation receiver assembly (Click here)
Map display is incomplete. Navigation receiver assembly (Click here)
Route cannot be calculated. Proceed to "Route cannot be Calculated" (Click here)
Navigation receiver assembly (Click here)
Navigation system cannot record memory point registration or each item setting. Navigation receiver assembly (Click here)
A message indicating to wait for a while because of low temperature is displayed. Start the engine and increase cabin temperature (near navigation receiver assembly). -
Navigation receiver assembly (Click here)
A message is displayed because map data cannot be read, and current position screen is not displayed. If message appears only when driving on rough roads, check if message disappears when vehicle is stopped. -
Navigation receiver assembly (Click here)
Map screen turns white or blue. (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally.) Change map scale to smallest (a scale that shows a large area). -
Navigation receiver assembly (Click here)
Customizable parameters cannot be changed. (Customizable parameters can be changed by using the intelligent tester.) Navigation receiver assembly (Click here)
The password set using the memory point export/import function has been forgotten. Proceed to "Clear Backup Password of Export/Import Memory Point Function" in Operation Check (Click here)
Reverse signal does not change in vehicle signal check mode. Proceed to "Reverse Signal Circuit" (Click here)
Navigation receiver assembly (Click here)
Parking brake switch signal does not change in vehicle signal check mode. Proceed to "Parking Brake Switch Circuit" (Click here)
Navigation receiver assembly (Click here)

General Audio Function
Symptom Suspected Area See page
No sound can be heard from speakers. Proceed to "No Sound can be Heard from Speakers" (Click here)
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Television Display Assembly"*1 (Click here)
Proceed to "Speaker circuit" (Click here)
Navigation receiver assembly (Click here)
Abnormal noise occurs. Proceed to "Noise Occurs" (Click here)
Navigation receiver assembly (Click here)
Sound quality is bad in all modes. (Volume is too low.) Check that the ASL function is off. -
Proceed to "Poor Sound Quality in All Modes (Low Volume)" (Click here)
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Television Display Assembly"*1 (Click here)
Proceed to "Speaker circuit" (Click here)
Navigation receiver assembly (Click here)
RSE sound cannot be heard or sound quality is bad.*1 Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Television Display Assembly" (Click here)
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Television Display Assembly" (Click here)
Navigation receiver assembly (Click here)
Television display assembly (Click here)
ASL does not function. Check that the ASL function is on. -
Navigation receiver assembly (Click here)

*1: w/ Rear Seat Entertainment System


FM or AM Radio Function
Symptom Suspected Area See page
Radio broadcast cannot be received or poor reception. Proceed to "Radio Broadcast cannot be Received or Poor Reception" (Click here)
Radio broadcast can be received but radio station cannot be displayed. (Some radio stations do not provide their name information.) Navigation receiver assembly (Click here)

CD or DVD Player Function
Symptom Suspected Area See page
Disc cannot be inserted/played or disc is ejected right after insertion. Proceed to "Disc cannot be Inserted or is Ejected Right After Insertion" (Click here)
Disc cannot be ejected. Proceed to "Disc cannot be Ejected" (Click here)
Disc sound skips. Proceed to "CD/DVD Sound Skips" (Click here)
While vehicle is stopped, DVD cannot be viewed even when parking brake is set. (Parking brake switch is on.) Proceed to "Parking Brake Switch Circuit" (Click here)
Navigation receiver assembly (Click here)
Screen color is poor only when watching DVD. Change the color settings on the screen adjustment screen. -
Navigation receiver assembly (Click here)
Sound quality is bad only when disc is played. (Volume is too low.) Proceed to "Sound Quality is Bad Only when Disc is played (Volume is Too Low)" (Click here)

AUX Function
Symptom Suspected Area See page
External device sound cannot be heard or sound quality is bad. (Stereo jack is used.) Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Navigation receiver assembly (Click here)
"AUX" is not displayed on system check mode screen. Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Navigation receiver assembly (Click here)
"VTR/RR" is not displayed on system check mode screen.*1 Proceed to "Sound Signal Circuit between Video Terminal and Television Display" (Click here)
Navigation receiver assembly (Click here)
Television display assembly (Click here)

*1: w/ Rear Seat Entertainment System


Voice Recognition Function
Symptom Suspected Area See page
Voice menu screen is not displayed. (Voice recognition function does not turn on.) Check if the voice recognition prompts function is "On". -
Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Steering Pad Switch Circuit" (Click here)
Navigation receiver assembly (Click here)
When voice recognition switch is pressed, a short beep is emitted but voice cannot be recognized properly. Proceed to "Voice is not Recognized" (Click here)
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly" (Click here)
Navigation receiver assembly (Click here)

"Bluetooth" Hands-free Function
Symptom Suspected Area See page
"Bluetooth" is inoperative. Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly" (Click here)
Navigation receiver assembly (Click here)
Cellular phone registration failure. Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure" (Click here)
Navigation receiver assembly (Click here)
Cellular phone cannot make outgoing/incoming calls or call in a certain place. Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls" (Click here)
Navigation receiver assembly (Click here)
Message that prompts to check the cellular phone is displayed. Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls" (Click here)
Navigation receiver assembly (Click here)
Phonebook data cannot be transferred manually or automatically. Check the automatically download contact setting -
When transferring phonebook data, OBEX authentication may be required. Enter "1234" into the "Bluetooth" phone. -
Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure" (Click here)
Navigation receiver assembly (Click here)
Volume of other caller's voice is not at an appropriate volume level, there is noise, sound quality is poor or other caller's voice cannot be heard. Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check (Click here)
Proceed to "The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted" (Click here)
Navigation receiver assembly (Click here)
Other caller cannot hear your voice at an appropriate volume level, there is noise or an echo, sound quality is poor or other caller cannot hear your voice. Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check (Click here)
Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted" (Click here)
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly" (Click here)
Navigation receiver assembly (Click here)

"Bluetooth" Audio Function
Symptom Suspected Area See page
Portable player cannot be registered. Proceed to "Portable Player cannot be Registered" (Click here)
Navigation receiver assembly (Click here)
Portable player cannot be connected manually/automatically. Proceed to "Portable Player cannot be Registered" (Click here)
Proceed to "Portable Player cannot be Connected Manually/Automatically" (Click here)
Navigation receiver assembly (Click here)
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth". Proceed to "Portable Player cannot be Registered" (Click here)
Proceed to "Portable Player cannot be Connected Manually/Automatically" (Click here)
Navigation receiver assembly (Click here)
Sound of portable player cannot be heard from speakers, or sound is low. Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low" (Click here)
Navigation receiver assembly (Click here)
Portable player does not play even after "Bluetooth" audio mode is selected. Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" (Click here)
Navigation receiver assembly (Click here)
Portable player does not play. Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" (Click here)
Navigation receiver assembly (Click here)
Track information such as track number, track name, elapsed play time and playlist is not displayed. Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Navigation receiver assembly (Click here)
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed. Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Navigation receiver assembly (Click here)
Battery condition of portable player is not displayed. Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Navigation receiver assembly (Click here)
"Bluetooth" signal condition is not displayed. Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Navigation receiver assembly (Click here)
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan. Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Navigation receiver assembly (Click here)
Noise occurs or sound skips when portable player plays. Proceed to "Noise Occurs or Sound Skips when Portable Player Plays" (Click here)
Navigation receiver assembly (Click here)
Registered device cannot be deleted. Proceed to "Registered Device cannot be Deleted" (Click here)
Navigation receiver assembly (Click here)

USB Audio System Function
Symptom Suspected Area See page
USB audio system sound cannot be heard or sound quality is bad. (USB connector is used.) Proceed to "Data Signal Circuit between Navigation Receiver and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Navigation receiver assembly (Click here)
USB device or "iPod" is not recognized. Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Navigation receiver assembly (Click here)
Track information such as track, artist and album names are not displayed. Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Navigation receiver assembly (Click here)
USB device or "iPod" is recognized but cannot play nor play in a sorted order. Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Navigation receiver assembly (Click here)
Album cover art cannot be displayed. Check that Display Cover Art on the "iPod" Settings screen is set to on. -
Check that a JPEG file is used for the cover art. -
"iPod" battery cannot be charged. Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Navigation receiver assembly (Click here)

Fuel Consumption Function
Symptom Suspected Area See page
"Fuel Consumption" icon is dimmed. Check if other icons or items displayed on screen have any problems. -
Navigation receiver assembly (Click here)
Graph is not displayed on "Trip Information" screen. Recheck with the engine running. -
Navigation receiver assembly (Click here)
Cruise range is not displayed on "Trip Information" screen. Turn engine switch on (IG) and recheck. -
Navigation receiver assembly (Click here)
Graph is not updated on "Past record" screen even though "Clear" is selected. Turn engine switch on (IG) and recheck. -
Navigation receiver assembly (Click here)
Graph is not displayed on "Past record" screen. Turn engine switch on (IG) and recheck. -
Navigation receiver assembly (Click here)