| Cannot enter EV mode
|
CAN Communication System
|
|
| Pattern Select Switch EV Mode Circuit
|
|
| EV drive mode switch (Pattern select switch assembly)
|
|
| Combination meter assembly
|
|
| EV mode indicator light does not illuminate
|
Combination meter assembly
|
|
| EV drive mode switch (Pattern select switch assembly)
|
|
| Pattern Select Switch EV Mode Circuit
|
|
| EV mode indicator light does not turn off
|
Combination meter assembly
|
|
| EV drive mode switch (Pattern select switch assembly)
|
|
| Pattern Select Switch EV Mode Circuit
|
|
| Cannot enter Sport/Eco mode
|
CAN Communication System
|
|
| Drive mode select switch (No. 1 pattern select switch assembly)
|
|
| Drive Mode Select Switch Circuit
|
|
| Combination meter assembly
|
|
| Sport/Eco mode indicator light does not illuminate
|
Drive mode select switch (No. 1 pattern select switch assembly)
|
|
| Drive Mode Select Switch Circuit
|
|
| Combination meter assembly
|
|
| Sport/Eco mode indicator light does not turn off
|
Drive mode select switch (No. 1 pattern select switch assembly)
|
|
| Drive Mode Select Switch Circuit
|
|
| Combination meter assembly
|
|
| Cannot enter TRAIL mode
|
CAN Communication System
|
|
| TRAIL mode switch (Pattern select switch)
|
|
| TRAIL Switch Circuit
|
|
| Combination meter assembly
|
|
| TRAIL indicator does not illuminate
|
TRAIL mode switch (Pattern select switch)
|
|
| TRAIL Switch Circuit
|
|
| Combination meter assembly
|
|
| TRAIL indicator does not turn off
|
TRAIL mode switch (Pattern select switch)
|
|
| TRAIL Switch Circuit
|
|
| Combination meter assembly
|
|
| Hunting (Poor idle)
|
Check for Diagnosis Related Information*3
|
|
| Drive Start Control
|
|
| Hesitation and/or poor acceleration
|
Check for Diagnosis Related Information*3
|
|
| Brake Override System
|
|
| Drive Start Control
|
|
| Shift range position cannot be changed by shifting to "+" or "-"
|
Transmission Control Switch Circuit
|
|
| Shift position indicator is malfunctioning
|
Indicator circuit
|
|
| Ignition switch does not turn ON (READY)
|
Check Vehicle Control History (wrong assembly confirmation)*1
|
|
| Entry and Start System (for Start Function)
|
|
| ECU Power Source Circuit (Hybrid Control System)
|
|
| Hybrid vehicle control ECU
|
|
| ECM
|
|
| Loud rattle from hybrid vehicle transaxle
|
Check idle learning
|
|
| Transmission input damper assembly
|
|
| Hybrid vehicle transaxle assembly
|
|
| Engine misfire
|
-
|
| "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display.*2
|
1. Make sure the HV battery cooling system intake port is not blocked.
|
-
|
| 2. Make sure there are no gaps between the connecting parts of the ducts.
|
-
|
3. Clean the No. 2 hybrid battery intake filter.
Check for entry of foreign matter.
|
|
| 4. Clear the DTCs to reset the learning values even if no DTCs are stored.
|
|
| Abnormal sound is heard from the area around the No. 1 hybrid battery intake duct.
|
1. Make sure the HV battery cooling system intake port is not blocked.
|
-
|
| 2. Make sure there are no gaps between the connecting parts of the ducts.
|
-
|
3. Clean the No. 2 hybrid battery intake filter.
Check for entry of foreign matter.
|
|
| 4. Clear the DTCs to reset the learning values even if no DTCs are stored.
|
|
| Engine stops and starts less frequently.
|
Check Vehicle Control History
(Limit to Charge / Discharge Control Value by Hybrid Battery Temperature High)
|
|
| Engine speed returns to idle slowly after accelerator pedal is fully released.
|
Check Vehicle Control History
(Limit to Charge / Discharge Control Value by Hybrid Battery Temperature High)
|
|