2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

PROBLEM SYMPTOMS TABLE

Troubleshooting · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Display Function 
Symptom
Suspected Area
See page
Pressing engine switch does not turn on system
Proceed to "Radio Receiver Power Source Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Black screen (No image appears on navigation/audio screen)
Proceed to "Black Screen"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Display does not dim (does not change to night screen) with tail switch on
Proceed to "Display does not Dim when Light Control Switch is Turned ON"
Click here
Proceed to "Illumination Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Power does not turn off (Screen remains on)
Proceed to "Radio Receiver Power Source Circuit"
Click here
Radio and display receiver assembly
Click here
Screen is distorted
Proceed to "Radio Receiver Power Source Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Screen flicker or color distortion
Proceed to "Screen Flicker or Color Distortion"
Click here
Proceed to "Radio Receiver Power Source Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Navigation function switches can be operated while vehicle being driven
Proceed to "Parking Brake Switch Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Panel Switch and Touch Switch Function 
Symptom
Suspected Area
See page
Illumination for panel switches does not come on with tail switch on
Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"
Click here
Proceed to "Illumination Circuit"
Click here
Radio and display receiver assembly
Click here
Panel switches do not function
Proceed to "Panel Switches do not Function"
Click here
Proceed to "Radio Receiver Power Source Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Touch panel switch does not function
Proceed to "Touch Panel Switch does not Function"
Click here
Proceed to "Radio Receiver Power Source Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Navigation function switches can be operated while vehicle is driving
Proceed to "Parking Brake Switch Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Steering Pad Switch Function 
Symptom
Suspected Area
See page
System cannot be operated by steering pad switch
Proceed to "Panel Switches do not Function"
Click here
Proceed to "Steering Pad Switch Circuit"
Click here
Radio and display receiver assembly
Click here
Illumination for steering pad switch does not come on with tail switch on
Proceed to "Illumination Circuit"
Click here
Radio and display receiver assembly
Click here
Navigation Function 
Symptom
Suspected Area
See page
Date and time on navigation screen are different from actual date and time
Proceed to "Vehicle Position Mark Deviates Greatly"
Click here
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
Click here
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
Click here
Navigation antenna assembly
Click here
Navigation ECU
Click here
Vehicle position mark moves slow or fast
Proceed to "Vehicle Position Mark Deviates Greatly"
Click here
Drive the vehicle for sensor learning (at a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more)
-
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
Click here
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
Click here
Navigation antenna assembly
Click here
Navigation ECU
Click here
Vehicle position mark deviates from correct position and does not return to correct position
Proceed to "Vehicle Position Mark Deviates Greatly"
Click here
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
Click here
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
Click here
Navigation antenna assembly
Click here
Navigation ECU
Click here
Vehicle position mark is not updated
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Extension Module"
Click here
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
Click here
Navigation antenna assembly
Click here
Navigation ECU
Click here
Cursor or map rotates when vehicle is stopped
Proceed to "Cursor or Map Rotates when Vehicle Stopped"
Click here
Navigation ECU
Click here
Vehicle position mark moves in the opposite direction to the vehicle
Proceed to "Cursor or Map Rotates when Vehicle Stopped"
Click here
Navigation ECU
Click here
Map display is incomplete
Proceed to "Map Display Incomplete"
Click here
Navigation ECU
Click here
Route cannot be calcu
Proceed to "Route cannot be Calculated"
Click here
Navigation ECU
Click here
Traffic information is not displayed on navigation screen
Proceed to "Radio Broadcast cannot be Received or Poor Reception"
Click here
Navigation system cannot record memory point registration or each item setting
Navigation ECU
Click here
A message is displayed because map data cannot be read, and current position screen is not displayed
If a message appears only when driving on rough roads, check if the message disappears when vehicle is stopped
-
Navigation ECU
Click here
Map screen turns white or blue (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally)
Change map scale to the smallest (a scale that shows a large area)
-
Navigation ECU
Click here
Customize parameters cannot be changed (customize parameters can be changed by using the GTS)
Navigation ECU
Click here
Reverse signal does not change in vehicle signal check mode
Proceed to "Reverse Signal Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Parking brake switch signal does not change in vehicle signal check mode
Proceed to "Parking Brake Switch Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Voice guidance does not function
Proceed to "Voice Guidance does not Function"
Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier
Click here
Proceed to "Navigation Voice Circuit"
Click here
Proceed to "Speaker Circuit"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
General Audio Function 
Symptom
Suspected Area
See page
No sound can be heard from speakers
Proceed to "No Sound can be Heard from Speakers"
Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Proceed to "Speaker circuit"
Click here
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Proceed to "Stereo Component Amplifier Power Source Circuit"
Click here
Stereo component amplifier assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Abnormal noise occurs
Proceed to "Noise Occurs"
Click here
Stereo component amplifier assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Sound quality is bad in all modes. (Volume is too low)
Check that the ASL function is off.
-
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Proceed to "Speaker circuit"
Click here
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Stereo component amplifier assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
ASL does not function
Check that the ASL function is on.
-
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
Click here
Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"
Click here
Stereo component amplifier assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
FM or AM Radio Function 
Symptom
Suspected Area
See page
Radio broadcast cannot be received or poor reception
Proceed to "Radio Broadcast cannot be Received or Poor Reception"
Click here
Radio broadcast can be received but radio station cannot be displayed (Some radio stations do not provide their name information)
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers
Check the volume settings
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Digital Audio Broadcast (DAB) Function (w/ DAB Function) 
Symptom
Suspected Area
See page
Sound cannot be heard/sound quality is poor/loud noise occurs only when DAB function is used (when receiving DAB-TA, sound temporarily may not be heard)
Operate the volume switch and turn up the volume level
-
Proceed to "Check DAB Reception" in Operation Check
Click here
No. 2 antenna cord sub-assembly
Click here
Digital audio broadcasting antenna assembly LH
Click here
Digital audio broadcasting antenna assembly RH
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
When time shift mode is not selected, DAB-TA cannot be used
Check if DAB-TA function is set to on
-
Check that "TP" icon is displayed on the screen
-
Check if similar symptoms occur with another vehicle
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
DAB-DAB Link, DAB-FM Link or Time- Shift cannot be used
Check if each function is set to on
-
Check if similar symptoms occur when receiving other broadcasts
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
CD Player Function 
Symptom
Suspected Area
See page
Disc cannot be played or player does not function with disc
Proceed to "Disc Player Outline" in System Description and check if the disc is compatible with the disc player
Click here
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Disc cannot be inserted/played or disc is ejected right after insertion
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "Disc cannot be Inserted or is Ejected Right After Insertion"
Click here
Disc cannot be ejected
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "Disc cannot be Ejected"
Click here
Disc sound skips
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "CD Sound Skips"
Click here
Sound quality is bad only when disc is played (volume is too low)
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "Sound Quality is Bad Only when Disc is Played (Volume is Too Low)"
Click here
AUX (Stereo Jack) Function 
Symptom
Suspected Area
See page
External device sound cannot be heard or sound quality is bad (Stereo jack is used)
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"AUX/VTR" is not displayed on system check mode screen
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"Bluetooth" Hands-free Function 
Symptom
Suspected Area
See page
"Bluetooth" is inoperative (In-vehicle device cannot be recognized by the cellular phone)
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"Bluetooth" compatible cellular phone cannot be registered
Proceed to "Cellular Phone Registration Failure"
Click here
"Bluetooth" compatible cellular phone cannot be connected
Check that no other cellular phone is connected as a hands-free device
-
Bring the cellular phone near the in-vehicle device and reconnect it
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually)
Check that "Bluetooth" automatic connection setting of the in-vehicle device is on
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"Bluetooth" compatible cellular phone connection is disconnected
Bring the cellular phone near the in-vehicle device and check if it is reconnected
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Message that prompts to check the cellular phone is displayed
Bring the cellular phone near the in-vehicle device and check if it is reconnected
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
When the engine switch is turned on (ACC), instructions for checking the connection condition between the invehicle device and cellular phone are displayed
Turn the cellular phone connection conformation display on the in-vehicle device off
-
Phonebook data cannot be transferred
Check that the phonebook automatic transfer setting of the in-vehicle device is on
-
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required)
-
Check that no applications on the cellular phone are running
-
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation
-
Transfer phonebook data manually
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Phonebook data is cleared
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Phonebook data cannot be edited
Check that the phonebook data automatic transfer setting is off
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
All the transferred phonebook data is sorted to "Other"
Check that no applications on the cellular phone are operating
-
Check that phonebook data in the cellular phone is not stored to the SIM card
-
Proceed to "Cellular Phone Inspection"
Click here
Explain to the customer that all the transferred phonebook data may be stored to "Other" depending on cellular phone
-
Cellular phone cannot make outgoing/ incoming calls
Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again
-
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth"
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Other caller's voice is interrupted by noise or sound quality is poor
Check the receiving voice volume (if it is too high, voice may sound distorted)
-
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Other caller's voice cannot be heard
Check that reception voice volume is not set to minimum
-
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Caller's voice (your voice) is interrupted by noise or sound quality is poor
Check the transmitting voice volume (if it is too high, voice may sound distorted)
-
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
-
Proceed to "Cellular Phone Inspection"
Click here
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
Click here
Other caller cannot hear your voice
When talking on the cellular phone, check that the mute button is not pressed
-
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
-
Proceed to "Cellular Phone Inspection"
Click here
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
Click here
No notification when a new SMS/MMS/e-mail has been received
Check the SMS/MMS/e-mail notification settings on the cellular phone and the radio and display receiver assembly
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Received SMS/MMS/e-mail cannot be read
Check the SMS/MMS/e-mail transfer settings on the cellular phone and the radio and display receiver assembly
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
SMS/MMS/e-mail cannot be replied to
Move the vehicle into a cellular phone service area, and check the operation of the radio and display receiver assembly and cellular phone
-
Check that the cellular phone can send an SMS/MMS/e-mail
-
Proceed to "Cellular Phone Inspection"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"Bluetooth" Audio Function 
Symptom
Suspected Area
See page
Portable player cannot be registered
Proceed to "Portable Player cannot be Registered"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Portable player cannot be connected manually/automatically
Proceed to "Portable Player cannot be Registered"
Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth"
Proceed to "Portable Player cannot be Registered"
Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Sound of portable player cannot be heard from speakers, or sound is low
Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Portable player does not play even after "Bluetooth" audio mode is selected
Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Portable player does not play
Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Track information such as track number, track name, elapsed play time and playlist is not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Battery condition of portable player is not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"Bluetooth" signal condition is not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Noise occurs or sound skips when portable player plays
Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Registered device cannot be deleted
Proceed to "Registered Device cannot be Deleted"
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
USB Audio System Function 
Symptom
Suspected Area
See page
USB audio system sound cannot be heard or sound quality is bad (USB connector is used)
Proceed to "Data Signal Circuit between Stereo Jack Adapter and Extension Module"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
USB device or "iPod" is not recognized
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Track information such as track, artist and album names are not displayed
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
USB device or "iPod" is recognized but cannot play, or can play but not in a sorted order
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Album cover art cannot be displayed
Check that Display Cover Art on the "iPod" or USB Settings screen is set to on
-
Check if similar symptoms occur with another vehicle
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
User set album cover art cannot be displayed
Check that a JPEG file is used for the album cover art registered to the music data in the USB device or "iPod" - radio and display receiver assembly
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"iPod" battery cannot be charged
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Screen is distorted or not displayed only when using the video function of an "iPod"
Check if "iPod" is set to output images
-
Proceed to "USB Audio System Outline" in System Description and check if the "iPod" is compatible with the radio and display receiver assembly
Click here
Check if the appropriate image signal setting (NTSC/ PAL) is selected
-
Check if video sound input is set to "A/V"
-
Connect using a known good cable and check if the image is output
-
Proceed to "Display Signal Circuit between Radio Receiver and Stereo Jack Adapter"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Fuel Consumption Function 
Symptom
Suspected Area
See page
"Fuel Consumption" icon is dimmed
Check if other icons or items displayed on screen have any problems
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Graph is not displayed on "Trip Information" screen
Recheck with the engine running
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Cruise range is not displayed on "Trip Information" screen
Turn engine switch on (IG) and recheck
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
"MirrorLink" Function (w/ "MirrorLink" Function) 
Symptom
Suspected Area
See page
Although USB device is recognized, "MirrorLink" function cannot be started (smartphone battery can be charged)
Proceed to "MirrorLink Function cannot be Started"
Click here
Image is not displayed
Proceed to "MirrorLink Image is not Displayed"
Click here
Sound cannot be heard
Proceed to "MirrorLink Sound cannot be Heard"
Click here
Connected Services (w/ Connected Services) 
Symptom
Suspected Area
See page
Connection to search engine fails.
Proceed to "Connected Services" in System Description
Click here
Contact the mobile network provider and check if the items in "Detail Setting" are set correctly
-
Check if the cellular phone is in standby mode
-
Check if the cellular phone is compatible with the connected service
-
Check if similar symptoms occur with another vehicle
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
POIs are not displayed on list (when using a USB device).
Check if POIs are stored in USB device root folders
-
Check that POIs with extension ".poi" are stored in the USB device
-
Check that 256 characters (ASCII) filename is used for POIs
-
Check that the file size of POIs is not 400 kb or more
-
Check that nothing has been changed for downloaded POIs other than renaming them
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
POIs cannot be registered to navigation system.
Check if the maximum number of memory points has been registered
-
Check that nothing has been changed for downloaded POIs other than renaming them
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Panoramio photos or Google street view cannot be displayed on map even though map scale is changed.*
Check if Panoramio photos or Google street view can be displayed at a different point
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Google street view "Next" or "Previous" switches cannot be selected.*
Wait for 90 seconds and check if the switches can be selected
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here

HINT:
*: Updates are necessary depending on the model.

Traffic Information (w/ Connected Services) 
Symptom
Suspected Area
See page
TPEG information (traffic) is not displayed on navigation screen.
After turning the engine switch from off to on (ACC), check if TPEG information (traffic) is displayed
-
Check that the traffic messages setting is set to a position other than off. If the symptom occurs in the roaming area, check the roaming reception setting
-
Check if similar symptoms occur with another vehicle
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
TPEG information (traffic) cannot be received automatically.
Check that the traffic messages setting is set to auto. If the symptom occurs in the roaming area, check the roaming reception setting
-
Change the traffic messages setting to auto and wait for 10 minutes with the navigation screen on. If an error code or error message is displayed, perform the inspection according to the displayed error code or error message
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
TPEG information (traffic) cannot be received manually.
Check that the traffic messages setting is set to manual. If the symptom occurs in the roaming area, check the roaming reception setting
-
Push the update switch and wait for 1 minute with the navigation screen on. Then, if an error code or error message is displayed, perform the inspection according to the displayed error code or error message
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
Detour search using TPEG information does not operate.
Check that "Dynamic reroute" is set to "Auto" or "Manual"
-
Navigation ECU
Click here
Radio and display receiver assembly
Click here
← PROBLEM SYMPTOMS TABLE (Aug 2013 – Jul 2014)TERMINALS OF ECU (Aug 2013 – Jul 2014) →