48826D
1.REMOVE STABILIZER CONTROL VALVE PROTECTOR
48860D
2.OPEN STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE
3.REMOVE FRONT WHEEL
17430
4.REMOVE TAILPIPE ASSEMBLY
for 1GR-FE:
Remove the tailpipe (See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1UR-FE:
Remove the tailpipe (See page Engine / Hybrid System>1UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 3UR-FE:
Remove the tailpipe (See page Engine / Hybrid System>3UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1VD-FTV (w/ DPF):
Remove the tailpipe (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE(w/ DPF)>REMOVAL).
for 1VD-FTV (w/o DPF):
Remove the tailpipe (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE(w/o DPF)>REMOVAL).
17420
5.REMOVE EXHAUST CENTER PIPE ASSEMBLY
for 1GR-FE:
Remove the center exhaust pipe (See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1UR-FE:
Remove the center exhaust pipe (See page Engine / Hybrid System>1UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 3UR-FE:
Remove the center exhaust pipe (See page Engine / Hybrid System>3UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1VD-FTV (w/ DPF):
Remove the center exhaust pipe (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE(w/ DPF)>REMOVAL).
for 1VD-FTV (w/o DPF):
Remove the center exhaust pipe (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE(w/o DPF)>REMOVAL).
6.DISCHARGE SUSPENSION FLUID PRESSURE
53806
7.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
53805
8.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
51405A
9.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
53783
10.REMOVE FRONT FENDER APRON TRIM PACKING B
53785B
11.REMOVE FRONT FENDER APRON TRIM PACKING D
488A5
12.REMOVE STABILIZER CONTROL TUBE PROTECTOR
Remove the 2 bolts and tube protector.
48890
13.DISCONNECT FRONT NO. 1 STABILIZER CONTROL TUBE ASSEMBLY
Remove the 2 union bolts and 2 gaskets, and disconnect the stabilizer control tube.
48829A
14.LOOSEN FRONT NO. 1 STABILIZER BRACKET LH
Loosen the 2 bolts of the front stabilizer brackets.
48824A
15.LOOSEN FRONT NO. 1 STABILIZER BRACKET RH
Loosen the 2 bolts of the front stabilizer brackets.
48810
16.REMOVE FRONT STABILIZER LINK ASSEMBLY LH
Remove the 2 bolts, nut and stabilizer link.
48820B
17.REMOVE FRONT STABILIZER LINK ASSEMBLY RH
Remove the bolt, nut and stabilizer link.
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.
48829A
18.REMOVE FRONT NO. 1 STABILIZER BRACKET LH
Remove the 2 bolts and stabilizer bracket from the front frame assembly.
48824A
19.REMOVE FRONT NO. 1 STABILIZER BRACKET RH
Remove the 2 bolts and stabilizer bracket from the front frame assembly.
48876
20.DISCONNECT FRONT STABILIZER CONTROL CYLINDER
Remove the bolt, washer, nut, and stabilizer control cylinder from the frame assembly.
48811
21.REMOVE FRONT STABILIZER BAR
Remove the bolt, nut and front stabilizer bar from the stabilizer control arm.
48815
22.REMOVE FRONT NO. 1 STABILIZER BAR BUSH
Remove the 2 stabilizer bar bushes from the front stabilizer bar.
488A0
23.REMOVE FRONT STABILIZER CONTROL ARM ASSEMBLY
Remove the bolt, nut and front stabilizer control arm from the front stabilizer control cylinder.
49189A
24.REMOVE FRONT NO. 1 SUSPENSION CONTROL BLEEDER PLUG
Remove the 2 front suspension control bleeder plugs from the front stabilizer control cylinder.