11459 1.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE SUPPORT (w/ DPF)
Install the engine oil level dipstick guide support with the 2 bolts.
23255B 2.INSTALL FUEL INJECTOR SEAL (w/ DPF)
23710B 3.INSTALL EXHAUST FUEL ADDITION INJECTOR ASSEMBLY (w/ DPF)
4.INSTALL INJECTOR LEAD WIRE (w/ DPF)
Install the injector lead wire with the bolt.
89491 5.INSTALL ENGINE OIL LEVEL SENSOR
6.INSTALL ENGINE WIRE BRACKET
15409F 7.INSTALL OIL FILTER OUTLET PIPE SUB-ASSEMBLY
Apply engine oil to 2 new gaskets, and install the 2 gaskets to the oil pan sub-assembly.
Install the oil filter outlet pipe sub-assembly with the 4 bolts.
12315A 8.INSTALL TRANSVERSE ENGINE MOUNTING BRACKET RH
Install the transverse engine mounting bracket RH with the 4 bolts.
12315A 9.INSTALL TRANSVERSE ENGINE MOUNTING BRACKET LH
Install the transverse engine mounting bracket LH with the 4 bolts.
25708 10.INSTALL NO. 3 VACUUM TRANSMITTING PIPE SUB-ASSEMBLY
Connect the No. 3 vacuum transmitting pipe sub-assembly to the No. 2 vacuum transmitting pipe.
Install the No. 3 vacuum transmitting pipe sub-assembly with the 3 bolts.
12502 11.INSTALL CHAIN COVER AND COMPRESSOR BRACKET SUB-ASSEMBLY
Install the chain cover and compressor bracket sub-assembly with the bolt.
Connect the wire harness.
16630H 12.INSTALL IDLER PULLEY ASSEMBLY (w/o Air Conditioning System)
Install the idler pulley assembly with the 3 bolts.
17142 13.INSTALL EXHAUST MANIFOLD LH WITH TURBOCHARGER SUB-ASSEMBLY
15474A 14.INSTALL TURBO OIL OUTLET HOSE
17293 15.INSTALL TURBOCHARGER STAY
17192 16.INSTALL NO. 2 EXHAUST MANIFOLD PIPE (w/ DPF)
16027 17.INSTALL NO. 1 TURBO WATER PIPE SUB-ASSEMBLY
17361J 18.INSTALL NO. 1 AIR TUBE
17878 19.INSTALL NO. 3 INTAKE AIR CONNECTOR PIPE
17141 20.INSTALL EXHAUST MANIFOLD RH
17106 21.INSTALL EXHAUST CROSSOVER PIPE SUB-ASSEMBLY
17168 22.INSTALL NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
Install the No. 2 exhaust manifold heat insulator with the 3 bolts.
17167 23.INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
11452 24.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
12142 25.INSTALL NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE
15301 26.INSTALL ENGINE OIL LEVEL DIPSTICK
16262 27.CONNECT WATER INLET HOSE
Connect the water inlet hose to the timing chain cover sub-assembly, and slide the clamp to secure the hose.
16331A 28.INSTALL THERMOSTAT
16321 29.INSTALL WATER INLET
16620D 30.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
16603B 31.INSTALL IDLER PULLEY SUB-ASSEMBLY
16307A 32.INSTALL FAN BRACKET SUB-ASSEMBLY
16332 33.ASSEMBLE NO. 1 AND NO. 2 WATER OUTLET PIPES AND WATER BY-PASS OUTLET SUB-ASSEMBLY
Install the water hose joint to the water by-pass outlet sub-assembly, and slide the clamp to secure the hose.
Connect the water hose joint to the No. 2 water outlet pipe, and slide the clamp to secure the hose.
Connect a new gasket and the No. 1 and No. 2 water outlet pipes with the 2 bolts.
The gasket's claws can face the No. 1 or No. 2 water outlet pipe.
34.INSTALL WATER OUTLET PIPE
Temporarily install 2 new gaskets and the water outlet pipe with the 4 bolts.
Tighten the 4 bolts.
16331 35.INSTALL WATER OUTLET
Connect the No. 2 water hose joint to the No. 1 water outlet pipe, and slide the clamp to secure the hose.
Install a new gasket and the water outlet with the 2 bolts.
89422C 36.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
37.INSTALL NO. 3 ENGINE HANGER
Install the No. 3 engine hanger with the 2 bolts.
17945 38.INSTALL INTERCOOLER SUPPORT BRACKET
Install the intercooler support bracket with the 2 bolts.
17946 39.INSTALL NO. 2 INTERCOOLER SUPPORT BRACKET
Install the No. 2 intercooler support bracket with the 2 bolts.
19850 40.INSTALL GLOW PLUG ASSEMBLY
41.INSTALL STARTER HOSE BRACKET SUB-ASSEMBLY
28100 42.INSTALL STARTER ASSEMBLY
17112 43.INSTALL NO. 2 INTAKE MANIFOLD
17111 44.INSTALL INTAKE MANIFOLD
16268 45.INSTALL NO. 1 WATER BY-PASS PIPE
16283 46.INSTALL NO. 6 WATER BY-PASS HOSE (w/ DPF)
Install the No. 6 water by-pass hose to the No. 1 water by-pass pipe, and slide the clamp to secure the hose.
23920A 47.INSTALL FUEL COOLER ASSEMBLY (w/o DPF)
23763 48.CONNECT NO. 3 NOZZLE LEAKAGE PIPE (w/o DPF)
Connect the No. 1 fuel hose to the fuel cooler assembly, and slide the clamp to secure the hose.
23764A 49.INSTALL NO. 4 NOZZLE LEAKAGE PIPE (w/o DPF)
16283 50.INSTALL NO. 6 WATER BY-PASS HOSE (w/o DPF)
27020 51.INSTALL GENERATOR ASSEMBLY
27280 52.INSTALL GENERATOR SPLASH GUARD COVER ASSEMBLY
29300 53.INSTALL VACUUM PUMP ASSEMBLY
44774 54.CONNECT UNION TO CONNECTOR TUBE HOSE