| "Bluetooth" is inoperative (In-vehicle device cannot be recognized by the cellular phone)
|
Proceed to "Cellular Phone Inspection"
|
|
| Radio receiver assembly
|
|
| "Bluetooth" compatible cellular phone cannot be registered
|
Proceed to "Cellular Phone Registration Failure"
|
|
| "Bluetooth" compatible cellular phone cannot be connected
|
Check that no other cellular phone is connected as a hands-free device
|
-
|
| Bring the cellular phone near the in-vehicle device and reconnect it
|
-
|
| Proceed to "Cellular Phone Inspection"
|
|
| Radio receiver assembly
|
|
| "Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually)
|
Check that "Bluetooth" automatic connection setting of the in-vehicle device is on
|
-
|
| Radio receiver assembly
|
|
| "Bluetooth" compatible cellular phone connection is disconnected
|
Bring the cellular phone near the in-vehicle device and check if it is reconnected
|
-
|
| Proceed to "Cellular Phone Inspection"
|
|
| Radio receiver assembly
|
|
| Message that prompts to check the cellular phone is displayed
|
Bring the cellular phone near the in-vehicle device and check if it is reconnected
|
-
|
| Proceed to "Cellular Phone Inspection"
|
|
| Radio receiver assembly
|
|
| When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed
|
Turn off the cellular phone connection confirmation display on the in-vehicle device
|
-
|
| Other caller's voice is interrupted by noise or sound quality is poor
|
Check the receiving voice volume (if it is too high, voice may sound distorted)
|
-
|
| Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
|
-
|
| Proceed to "Cellular Phone Inspection"
|
|
| Radio receiver assembly
|
|
| Other caller's voice cannot be heard
|
Check that reception voice volume is not set to minimum
|
-
|
| Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
|
-
|
| Proceed to "Cellular Phone Inspection"
|
|
| Radio receiver assembly
|
|
| Caller's voice (your voice) is interrupted by noise or sound quality is poor
|
Check the transmitting voice volume (if it is too high, voice may sound distorted)
|
-
|
| Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
|
-
|
| Proceed to "Cellular Phone Inspection"
|
|
| Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
|
| Radio receiver assembly
|
|
| Other caller cannot hear your voice
|
When talking on the cellular phone, check if the mute button is not pressed
|
-
|
| Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
|
-
|
| Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
|
|
| Proceed to "Cellular Phone Inspection"
|
|
| Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
|
| Radio receiver assembly
|
|
| "Bluetooth" can be connected while driving
|
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
|
| Radio receiver assembly
|
|