| While the parking support brake system is operating, no parking support brake notifications are displayed on the multi-information display.
|
CAN communication system
|
|
| Clearance warning ECU assembly*1
|
|
| Clearance warning ECU assembly*2
|
|
| Combination meter assembly
|
|
| While the parking support brake system is operating, no parking support brake notifications are displayed on the radio and display receiver assembly.*4
|
CAN communication system
|
|
| Clearance warning ECU assembly*1
|
|
| Clearance warning ECU assembly*2
|
|
| Parking assist ECU
|
|
| Radio and display receiver assembly
|
|
| "PKSB Malfunction Visit Your Dealer" is displayed
|
CAN communication system
|
|
| Combination meter assembly
|
|
| Clearance warning ECU assembly*1
|
|
| Clearance warning ECU assembly*2
|
|
| "PKSB Unavailable" is displayed
|
Check that no foreign matter is attached to the ultrasonic sensors.
|
-
|
| Steering angle neutral point (Parking support brake system registration)
|
|
| CAN communication system
|
|
| Combination meter assembly
|
|
| Clearance warning ECU assembly*1
|
|
| Clearance warning ECU assembly*2
|
|
| Parking support brake system does not operate when there is a possibility of a collision (Warning message "PKSB Unavailable" not displayed)
|
Check the installation of the ultrasonic sensors (front)
|
|
| Check the installation of the ultrasonic sensors (rear)
|
|
| Adjust the installation of the ultrasonic sensors as necessary.
|
|
| Ultrasonic sensors (front)
|
|
| Ultrasonic sensors (rear)
|
|
| Clearance warning ECU assembly*1
|
|
| Clearance warning ECU assembly*2
|
|
| Parking support brake system control operates when there is no possibility of a collision
|
Check the installation of the ultrasonic sensors (front)
|
|
| Check the installation of the ultrasonic sensors (rear)
|
|
| Adjust the installation of the ultrasonic sensors as necessary.
|
|
| Ultrasonic sensors (front)
|
|
| Ultrasonic sensors (rear)
|
|
| Clearance warning ECU assembly*1
|
|
| Clearance warning ECU assembly*2
|
|
| Parking support brake system control cannot be turned off (PKSB OFF indicator does not illuminate)
|
Combination meter assembly: Perform Active Test
|
|
| Steering pad switch assembly
|
|
| Spiral cable sub-assembly
|
|
| Harness or connector
|
-
|
| Clearance warning ECU assembly*1
|
|
| Clearance warning ECU assembly*2
|
|
| PKSB OFF indicator blinks
|
If "Yes" is displayed for the Data List item "BSM Radar Communication Invalid History", the blind spot monitor system may be malfunctioning.*3
|
|
| Check that no foreign matter is attached to the ultrasonic sensors.
|
-
|
| Steering angle neutral point (Parking support brake system registration)
|
|