Home › Engine / Hybrid System › N04C-UH (ENGINE MECHANICAL) › ENGINE ASSEMBLY › 2019.08–2021.01
RM2850E _51 Engine / Hybrid System _073174 N04C-UH ENGINE MECHANICAL _0356071 ENGINE ASSEMBLY A

N04C-UH ENGINE MECHANICAL  ENGINE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 22100 1.INSTALL INJECTION OR SUPPLY PUMP ASSEMBLY

a.

Install the injection or supply pump assembly with the 4 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 23849G 2.INSTALL FUEL SUPPORT

a.

Install the fuel support with the 2 bolts.

Torque:

55 N*m (561 kgf*cm, 41 ft.*lbf)



b.

Install the fuel support with the 2 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 82702E 3.INSTALL WIRING HARNESS BRACKET

a.

Install the wiring harness bracket with the 2 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 23810A 4.INSTALL COMMON RAIL ASSEMBLY

a.

Install the common rail assembly with the 2 bolts.

Torque:

55 N*m (561 kgf*cm, 41 ft.*lbf)



Hide 5.INSTALL NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY

a.

Install the No. 3 nozzle leakage pipe sub-assembly with the 2 new gaskets and the 2 union bolts.

Torque:

12.7 N*m (130 kgf*cm, 9 ft.*lbf)



b.

Install the fuel pipe clamp with the nut. Tighten the nut until the clamp edges make contact.


Hide 29601B 7.INSTALL VACUUM PUMP OIL PIPE SUB-ASSEMBLY

Hide 19971E 8.INSTALL VACUUM PIPE

a.

Install 2 new gaskets and the vacuum pipe with the union bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


b.

Install the pipe clamp with the nut. Tighten the nut until the clamp edges make contact.


Hide 23811 9.INSTALL FUEL FILTER TO INJECTION PUMP FUEL PIPE

Hide 23803H 10.INSTALL FUEL RETURN PIPE SUB-ASSEMBLY

Hide 16100 11.INSTALL ENGINE WATER PUMP ASSEMBLY

Hide 16206C 12.INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY

a.

Install the water by-pass pipe sub-assembly with 6 new O-rings and the 6 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 16206 13.INSTALL NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

a.

Connect the water hose.


b.

Install the No. 2 water by-pass pipe sub-assembly with the 2 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 87208L 14.INSTALL WATER PIPE SUB-ASSEMBLY

a.

Install the water pipe sub-assembly with a new O-ring and the 3 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 16331 15.INSTALL WATER OUTLET HOUSING

a.

Install the water outlet housing with a new gasket and the 3 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 16331A 16.INSTALL THERMOSTAT

Hide 16331 17.INSTALL WATER OUTLET SUB-ASSEMBLY

a.

Install the water outlet sub-assembly with the 3 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 88431 18.INSTALL NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)

a.
A347514E02
0.646,1.052 0.802,1.25 0.156,0.198 10 false A 0.479,0.563 0.604,0.771 0.125,0.208 10 true A 2.146,1.417 2.302,1.615 0.156,0.198 10 false A 2.177,0.323 2.365,0.531 0.188,0.208 10 true A 2.438,1.052 2.625,1.26 0.188,0.208 10 true B 2.438,0.74 2.625,0.948 0.188,0.208 10 true B 1.427,0.052 1.563,0.219 0.135,0.167 10 true B

Install the No. 1 compressor mounting bracket and compressor mounting bracket set with the 7 bolts.

Torque:
Bolt A:

55 N*m (561 kgf*cm, 41 ft.*lbf)

Bolt B:

28.5 N*m (291 kgf*cm, 21 ft.*lbf)


HINT:

Firmly press and hold, the No. 1 compressor mounting bracket and compressor mounting bracket set against the timing gear cover to eliminate any gaps. Then uniformly tighten the 7 bolts.



Hide 88440B 19.INSTALL IDLE PULLEY ASSEMBLY WITH BRACKET (w/ Air Conditioning System)

a.

Install the idle pulley assembly with bracket with the 3 bolts.

Torque:

55 N*m (561 kgf*cm, 41 ft.*lbf)



Hide 16630G 20.INSTALL IDLER PULLEY ASSEMBLY

a.

Install the idler pulley assembly with the 2 bolts.

Torque:

55 N*m (561 kgf*cm, 41 ft.*lbf)



Hide 21.INSTALL CAMSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.


b.

Install the camshaft position sensor with the bolt.

Torque:

12 N*m (122 kgf*cm, 9 ft.*lbf)



Hide 22.INSTALL CRANKSHAFT POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.


b.

Install the crankshaft position sensor with the bolt.

Torque:

12 N*m (122 kgf*cm, 9 ft.*lbf)



Hide 89422 23.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

a.
A187818

Using a 19 mm deep socket wrench, install the water temperature sender gauge assembly with a new O-ring.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 24.INSTALL OIL COOLER COVER SUB-ASSEMBLY

Hide 83530 25.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

Hide 17111 27.INSTALL INTAKE MANIFOLD

Hide 23670 28.INSTALL INJECTOR ASSEMBLY

Hide 23741B 29.INSTALL INJECTION PIPE CLAMP

Hide 17113 30.INSTALL NO. 2 INTAKE PIPE

A146604E02
2.694,0.388 2.882,0.545 0.189,0.156 10 *1 2.245,0.716 2.631,0.503 false

Text in Illustration
*1 Seal Packing

a.

Apply a continuous bead of seal packing (width: 1.5 to 2.5 mm (0.0591 to 0.0984 in.)) as shown in the illustration.

Seal packing:

Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent


NOTICE:
·

Remove any oil from the contact surface.

·

Install the No. 2 intake pipe with EGR valve within 3 minutes, and tighten the bolts within 15 minutes of applying the seal packing.




b.

Install the No. 2 intake pipe with EGR valve with the 4 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 16206C 32.INSTALL WATER BY-PASS PIPE SUB-ASSEMBLY

a.

Install the water by-pass pipe sub-assembly with the 3 bolts, 2 union bolts and 4 new gaskets.

Torque:
Bolt:

29 N*m (291 kgf*cm, 21 ft.*lbf)

Union bolt:

25 N*m (250 kgf*cm, 18 ft.*lbf)



b.

Connect the 2 water by-pass hoses to the EGR valve.


Hide 15301 33.INSTALL OIL DIPSTICK GUIDE

a.

Install the oil dipstick guide with the bolt and new O-ring.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 25625B 34.INSTALL EGR VALVE BRACKET

a.

Install the EGR valve bracket with the 4 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 11202D 35.INSTALL NO. 2 CYLINDER HEAD COVER SUB-ASSEMBLY

a.

Install 4 new No. 2 cylinder head cover gaskets to the 4 injector assemblies.

NOTICE:
·
A451473C02
1.698,0.833 2.177,0.302 2.177,0.302 2.375,0.302 true 2.417,0.198 2.729,0.354 0.313,0.156 10 false *a
*a Connector Insertion Side of Injector Assembly
V100145

Engine Oil


To make inserting the part into the injector assembly easier, align the part with the head shape of the injector assembly.

·

The No. 2 cylinder head cover sub-assembly can be installed in any direction.




b.

Apply a light coat of the engine oil to the 4 No. 2 cylinder head cover gaskets as shown in the illustration.


c.

Install new cylinder head cover gasket onto the No. 2 cylinder head cover sub-assembly.


d.

Install the 2 cushions, 2 spacers and tighten the 2 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 11201 36.INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY

a.

Install the 2 cylinder head cover stay and cylinder head cover sub-assembly with the 2 bolts.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 12180E 37.INSTALL OIL FILLER CAP SUB-ASSEMBLY

a.

Install the oil filler cap sub-assembly.


Hide 38.INSTALL ENGINE ASSEMBLY

a.

Support the engine with an engine lifter.


b.

Install the engine assembly.


c.

Install the front No. 1 engine mounting bracket LH with the 4 bolts.

Torque:

68.5 N*m (699 kgf*cm, 51 ft.*lbf)



d.
A344325E01
1.115,1.406 1.271,1.604 0.156,0.198 10 true A 2.948,1.823 3.115,2 0.167,0.177 10 true B

Install the engine mounting stabilizer and front engine mounting insulator with the 2 nuts.

Torque:
Nut A:

87 N*m (887 kgf*cm, 64 ft.*lbf)

Nut B:

90 N*m (918 kgf*cm, 66 ft.*lbf)


Text in Illustration
V100135

Bolt
V100136

Nut


e.
A344326E01
1.406,0.552 1.542,0.74 0.135,0.188 10 true A 2.031,2.5 2.167,2.688 0.135,0.188 10 true B

Install the front No. 1 engine mounting bracket RH with the 4 bolts.

Torque:

68.5 N*m (699 kgf*cm, 51 ft.*lbf)



f.

Install the engine mounting stabilizer and front engine mounting insulator with the 2 nuts.

Torque:
Nut A:

87 N*m (887 kgf*cm, 64 ft.*lbf)

Nut B:

90 N*m (918 kgf*cm, 66 ft.*lbf)


Text in Illustration
V100135

Bolt
V100136

Nut


Hide 82121 39.INSTALL ENGINE WIRE

a.

Install the engine wire.


Hide 51202D 40.INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

a.

Install the front suspension crossmember sub-assembly with the 6 bolts, 4 washers and 4 nuts.

Torque:

160 N*m (1631 kgf*cm, 118 ft.*lbf)



Hide 45450 41.INSTALL STEERING RELAY ROD ASSEMBLY

a.
A451477C02
0.135,0.063 0.344,0.25 0.208,0.188 12 false *a 0.135,2.281 0.323,2.458 0.188,0.177 12 false *b 2.833,0.5 2.969,0.667 0.135,0.167 10 false A 0.479,2.896 0.625,3.083 0.146,0.188 10 true B
*a for Center Arm Bracket Assembly Side
*b for Idler Arm Bracket Assembly Side


Connect the steering relay rod assembly to the center arm bracket assembly and idler arm bracket assembly with the 2 nuts.

Torque:
Nut A : 150 N*m (1530 kgf*cm, 111 ft.*lbf)
Nut B : 91 N*m (928 kgf*cm, 67 ft.*lbf)


b.

Install 2 new cotter pins.


c.
A451482

Connect the steering relay rod assembly to the tie rod assembly LH with the nut.

Torque:
155 N*m (1581 kgf*cm, 114 ft.*lbf)


d.

Install a new cotter pin.


Hide 22100A 43.CONNECT INJECTION PUMP TO FUEL FILTER FUEL HOSE OR PIPE

a.

Connect the injection pump to fuel filter fuel hose or pipe.


Hide 23273C 44.CONNECT NO. 2 FUEL HOSE

a.

Connect the No. 2 fuel hose.


Hide 44774 45.CONNECT UNION TO CONNECTOR TUBE HOSE

Connect the union to connector tube hose.

Hide 44310 47.INSTALL VANE PUMP ASSEMBLY

a.

Coat a new O-ring with power steering fluid and install it onto the vane pump assembly.


b.

Install the vane pump assembly with the 2 bolts.

Torque:

20 N*m (204 kgf*cm, 15 ft.*lbf)



Hide 53712C 48.INSTALL FRONT FENDER APRON LH

Hide 44360 49.INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY

a.

Install the vane pump oil reservoir assembly with the 3 bolts.

Torque:

18 N*m (184 kgf*cm, 13 ft.*lbf)



Hide 27020 50.INSTALL GENERATOR ASSEMBLY

Hide 88320 51.INSTALL COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)

a.

Install the cooler compressor assembly with the 6 bolts.

Torque:

47 N*m (475 kgf*cm, 34 ft.*lbf)



Hide 16577C 52.INSTALL RADIATOR PIPE

a.

Install a new O-ring onto the radiator pipe.


b.

Install the radiator pipe with the 2 bolts.

Torque:

28.5 N*m (291 kgf*cm, 21 ft.*lbf)



Hide 17201 53.INSTALL TURBOCHARGER SUB-ASSEMBLY

Hide 17341F 54.INSTALL NO. 1 AIR HOSE

a.

Install the No. 1 air hose with the bolt.

Torque:

18 N*m (184 kgf*cm, 13 ft.*lbf)



b.

Tighten the 2 No. 1 air hose clamp.


c.

Connect the ventilation hose.


d.

Install the wire harness.


Hide 31250 55.INSTALL CLUTCH DISC ASSEMBLY (for Manual Transmission)

Hide 35000 56.INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

Hide 33110 57.INSTALL MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)

Hide 16400 58.INSTALL RADIATOR ASSEMBLY