VEHICLE STABILITY CONTROL SYSTEM
Symptom
| Suspected Area
| See page
|
ABS, BA and/or EBD does not operate
| Check for DTCs again and make sure that normal system code displayed.
|
Click here
|
IG1 power source circuit
|
Click here
|
IG2 power source circuit
|
Click here
|
Front speed sensor circuit
|
Click here
|
Rear speed sensor circuit
|
Click here
|
Check hydraulic brake booster using Techstream (Check hydraulic brake booster operation using active test function) If abnormal, check hydraulic circuit for leakage.
|
Click here
|
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace master cylinder solenoid.
|
Click here
|
ABS, BA and/or EBD does not operate efficiently
| Check for DTCs again and make sure that normal system code displayed.
|
Click here
|
Front speed sensor circuit
|
Click here
|
Rear speed sensor circuit
|
Click here
|
Stop light switch circuit
|
Click here
|
Check hydraulic brake booster using Techstream (Check hydraulic brake booster operation using active test function) If abnormal, check hydraulic circuit for leakage.
|
Click here
|
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace master cylinder solenoid.
|
Click here
|
VSC and/or TRAC does not operate
| Check for DTCs again and make sure that normal system code displayed.
|
Click here
|
IG1 power source circuit
|
Click here
|
IG2 power source circuit
|
Click here
|
Front speed sensor circuit
|
Click here
|
Rear speed sensor circuit
|
Click here
|
Yaw rate and deceleration sensor circuit
|
Click here
|
Steering angle sensor circuit
|
Click here
|
Check hydraulic brake booster using Techstream (Check hydraulic brake booster operation using active test function) If abnormal, check hydraulic circuit for leakage.
|
Click here
|
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace master cylinder solenoid.
|
Click here
|
AUTO LSD does not operate
| Check for DTCs again and make sure that normal system code displayed.
|
Click here
|
Check hydraulic brake booster using Techstream (Check hydraulic brake booster operation using active test function) If abnormal, check hydraulic circuit for leakage.
|
Click here
|
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace master cylinder solenoid.
|
Click here
|
A-TRAC does not operate
| Check for DTCs again and make sure that normal system code displayed.
|
Click here
|
Check hydraulic brake booster using Techstream (Check hydraulic brake booster operation using active test function) If abnormal, check hydraulic circuit for leakage.
|
Click here
|
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace master cylinder solenoid.
|
Click here
|
DTC check cannot be performed
| Check for DTCs again and make sure that normal system code displayed.
|
Click here
|
TC and CG terminal circuit
|
Click here
|
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace master cylinder solenoid.
|
Click here
|
Sensor signal check cannot be performed
| TS and CG terminal circuit
|
Click here
|
If symptoms still occur even after above circuits in suspected areas inspected and proved to be normal, replace master cylinder solenoid.
|
Click here
|
ABS warning light remains on
| ABS warning light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
ABS warning light does not come on
| ABS warning light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
SLIP indicator light remains on
| SLIP indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
SLIP indicator light does not come on
| SLIP indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
BRAKE warning light remains on
| BRAKE warning light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
BRAKE warning light does not come on
| BRAKE warning light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
VSC OFF indicator light remains on
| VSC OFF indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
VSC OFF indicator light does not come on
| VSC OFF indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
TRAC OFF indicator light remains on
| TRAC OFF indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
TRAC OFF indicator light does not come on
| TRAC OFF indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
Crawl indicator light remains on
| Crawl indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
Crawl indicator light does not come on
| Crawl indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
AUTO LSD indicator light remains on
| AUTO LSD indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
AUTO LSD indicator light does not come on
| AUTO LSD indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
A-TRAC indicator light remains on
| A-TRAC indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
A-TRAC indicator light does not come on
| A-TRAC indicator light circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|
VSC buzzer abnormal
| VSC buzzer circuit
|
Click here
|
Master cylinder solenoid
|
Click here
|