2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

PROBLEM SYMPTOMS TABLE

Troubleshooting · Vehicles built Aug 2013 – Jul 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Display Function 
Symptom
Suspected Area
See page
Pressing engine switch does not turn on system
Proceed to "Navigation Receiver Assembly Power Source Circuit"
Click here
Navigation receiver assembly
Click here
Black screen (No image appears on navigation/audio screen)
Proceed to "Black Screen"
Click here
Navigation receiver assembly
Click here
Display does not dim (does not change to night screen) with tail switch on
Proceed to "Display does not Dim when Light Control Switch is Turned ON"
Click here
Proceed to "Illumination Circuit"
Click here
Navigation receiver assembly
Click here
Power does not turn off (Screen remains on)
Proceed to "Navigation Receiver Assembly Power Source Circuit"
Click here
Navigation receiver assembly
Click here
Screen is distorted
Proceed to "Navigation Receiver Assembly Power Source Circuit"
Click here
Navigation receiver assembly
Click here
Screen flicker or color distortion
Proceed to "Screen Flicker or Color Distortion"
Click here
Proceed to "Navigation Receiver Assembly Power Source Circuit"
Click here
Navigation receiver assembly
Click here
Navigation function switches can be operated while vehicle being driven
Proceed to "Parking Brake Switch Circuit"
Click here
Navigation receiver assembly
Click here
Panel Switch and Touch Switch Function 
Symptom
Suspected Area
See page
Illumination for panel switches does not come on with tail switch on
Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"
Click here
Proceed to "Illumination Circuit"
Click here
Navigation receiver assembly
Click here
Panel switches do not function
Proceed to "Panel Switches do not Function"
Click here
Proceed to "Navigation Receiver Assembly Power Source Circuit"
Click here
Navigation receiver assembly
Click here
Touch panel switch does not function
Proceed to "Touch Panel Switch does not Function"
Click here
Proceed to "Navigation Receiver Assembly Power Source Circuit"
Click here
Navigation receiver assembly
Click here
The handwriting input screen is not displayed or potential matches for the character currently being entered and potential matches for the next character are not displayed.
Navigation receiver assembly
Click here
Navigation function switches can be operated while vehicle is driving
Proceed to "Parking Brake Switch Circuit"
Click here
Navigation receiver assembly
Click here
Steering Pad Switch Function 
Symptom
Suspected Area
See page
System cannot be operated by steering pad switch
Proceed to "Panel Switches do not Function"
Click here
Proceed to "Steering Pad Switch Circuit"
Click here
Navigation receiver assembly
Click here
Illumination for steering pad switch does not come on with tail switch on
Proceed to "Illumination Circuit"
Click here
Navigation receiver assembly
Click here
Navigation Function 
Symptom
Suspected Area
See page
GPS mark is not displayed
Proceed to "GPS Mark is not Displayed"
Click here
Navigation antenna assembly
Click here
Navigation receiver assembly
Click here
Date and time on navigation screen is different from actual date and time
Proceed to "GPS Mark is not Displayed"
Click here
Navigation antenna assembly
Click here
Navigation receiver assembly
Click here
Vehicle position mark deviates from correct position and does not return to correct position
Proceed to "GPS Mark is not Displayed"
Click here
Navigation antenna assembly
Click here
Navigation receiver assembly
Click here
Cursor or map rotates when vehicle is stopped
Proceed to "Cursor or Map Rotates when Vehicle Stopped"
Click here
Navigation receiver assembly
Click here
Vehicle position mark moves in the opposite direction to the vehicle
Proceed to "Cursor or Map Rotates when Vehicle Stopped"
Click here
Proceed to "Reverse Signal Circuit"
Click here
Navigation receiver assembly
Click here
Vehicle position mark deviates from and returns to correct position repeatedly even though GPS mark is displayed
Proceed to "GPS Mark is not Displayed"
Click here
Drive the vehicle for sensor learning (At a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more)
-
Navigation antenna assembly
Click here
Navigation receiver assembly
Click here
Vehicle position mark moves slow or fast
Proceed to "GPS Mark is not Displayed"
Click here
Navigation antenna assembly
Click here
Navigation receiver assembly
Click here
Voice guidance does not function
Proceed to "Voice Guidance does not Function"
Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
Click here
Proceed to "Navigation Voice Circuit"
Click here
Proceed to "Speaker Circuit"
Click here
Navigation receiver assembly
Click here
Map display is incomplete
Navigation receiver assembly
Click here
Route cannot be calculated
Proceed to "Route cannot be Calculated"
Click here
Navigation receiver assembly
Click here
Navigation system cannot record memory point registration or each item setting
Navigation receiver assembly
Click here
A message indicating to wait for a while because of low temperature is displayed
Start the engine and increase cabin temperature (Near navigation receiver assembly)
-
Navigation receiver assembly
Click here
A message is displayed because map data cannot be read, and current position screen is not displayed
If message appears only when driving on rough roads, check if message disappears when vehicle is stopped
-
Navigation receiver assembly
Click here
Map screen turns white or blue (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally)
Change map scale to smallest (a scale that shows a large area)
-
Navigation receiver assembly
Click here
Customizable parameters cannot be changed (customizable parameters can be changed by using the GTS)
Navigation receiver assembly
Click here
The password set using the memory point export/import function has been forgotten
Proceed to "Clear Backup Password of Export/ Import Memory Point Function" in Operation Check
Click here
Reverse signal does not change in vehicle signal check mode
Proceed to "Reverse Signal Circuit"
Click here
Navigation receiver assembly
Click here
Parking brake switch signal does not change in vehicle signal check mode
Proceed to "Parking Brake Switch Circuit"
Click here
Navigation receiver assembly
Click here
General Audio Function 
Symptom
Suspected Area
See page
No sound can be heard from speakers
Proceed to "No Sound can be Heard from Speakers"
Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
Click here
Proceed to "Speaker circuit"
Click here
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
Click here
Proceed to "Stereo Component Amplifier Power Source Circuit"
Click here
Stereo component amplifier assembly
Click here
Navigation receiver assembly
Click here
Abnormal noise occurs
Proceed to "Noise Occurs"
Click here
Stereo component amplifier assembly
Click here
Navigation receiver assembly
Click here
Sound quality is bad in all modes. (Volume is too low)
Check that the ASL function is off.
-
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
Click here
Proceed to "Speaker circuit"
Click here
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
Click here
Stereo component amplifier assembly
Click here
Navigation receiver assembly
Click here
ASL does not function
Check that the ASL function is on.
-
Proceed to "Vehicle Speed Signal Circuit between Navigation Receiver Assembly and Combination Meter"
Click here
Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"
Click here
Stereo component amplifier assembly
Click here
Navigation receiver assembly
Click here
FM or AM Radio Function 
Symptom
Suspected Area
See page
Radio broadcast cannot be received or poor reception
Proceed to "Radio Broadcast cannot be Received or Poor Reception"
Click here
Radio broadcast can be received but radio station cannot be displayed (Some radio stations do not provide their name information)
Navigation receiver assembly
Click here
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers
Check the volume settings
-
Navigation receiver assembly
Click here
Radio broadcast can be received but station list cannot be displayed
Wait for 120 seconds in radio mode, and select the "Refresh" switch on the station list screen
-
Navigation receiver assembly
Click here
Radio broadcast can be received but station list cannot be displayed
Select the "Refresh" switch on the station list screen
-
Wait for 10 minutes with the engine switch on (ACC), and select the "Refresh" switch on the station list screen again
-
Navigation receiver assembly
Click here
After the voice recognition function or hands-free function is turned off, the cache radio does not operate
Check that the cache radio setting is on
-
Navigation receiver assembly
Click here
When the cache radio is playing, sound is interrupted, sound cannot be heard or sound quality is poor
Check if similar symptoms occur when receiving conventional FM/AM radio broadcasts
-
Check if similar symptoms occur when receiving other broadcasts
-
Move the vehicle to a place where the reception sensitivity is good and check again
-
Navigation receiver assembly
Click here
When the cache radio is playing, sound can be heard, but no information is displayed (some radio stations do not provide their name information)
Check if similar symptoms occur when receiving other broadcasts
-
Move the vehicle to a place where the reception sensitivity is good and check again
-
Navigation receiver assembly
Click here
CD or DVD Player Function 
Symptom
Suspected Area
See page
Disc cannot be played or player does not function with disc
Proceed to "Disc Player Outline" in System Description and check if the disc is compatible with the disc player
Click here
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Navigation receiver assembly
Click here
Disc cannot be inserted/played or disc is ejected right after insertion
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "Disc cannot be Inserted or is Ejected Right After Insertion"
Click here
Disc cannot be ejected
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "Disc cannot be Ejected"
Click here
Disc sound skips
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "CD/DVD Sound Skips"
Click here
While vehicle is stopped, DVD cannot be viewed even when parking brake is set (parking brake switch is on)
Proceed to "Parking Brake Switch Circuit"
Click here
Navigation receiver assembly
Click here
Screen color is poor only when watching a DVD
Change the color settings on the screen adjustment screen
-
Navigation receiver assembly
Click here
Sound quality is bad only when disc is played (volume is too low)
Proceed to "Check Optical Disc Error History" in Operation Check
Click here
Proceed to "Sound Quality is Bad Only when Disc is Played (Volume is Too Low)"
Click here
AUX (Stereo Jack) Function 
Symptom
Suspected Area
See page
External device sound cannot be heard or sound quality is bad (Stereo jack is used)
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
"AUX/VTR" is not displayed on system check mode screen
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
"Bluetooth" Hands-free Function 
Symptom
Suspected Area
See page
"Bluetooth" is inoperative.
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly"
Click here
Navigation receiver assembly
Click here
Cellular phone registration failure.
Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure"
Click here
Navigation receiver assembly
Click here
Cellular phone cannot make outgoing/incoming calls or call in a certain place.
Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls"
Click here
Navigation receiver assembly
Click here
Message that prompts to check the cellular phone is displayed.
Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls"
Click here
Navigation receiver assembly
Click here
Phonebook data cannot be transferred manually or automatically.
Check the automatic download contract setting.
-
When transferring phonebook data, OBEX authentication may be required. Enter "1234" into the "Bluetooth" phone.
-
Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure"
Click here
Navigation receiver assembly
Click here
Volume of other caller's voice is not at an appropriate volume level, there is noise, sound quality is poor or other caller's voice cannot be heard.
Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check
Click here
Proceed to "The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted"
Click here
Navigation receiver assembly
Click here
Other caller cannot hear your voice at an appropriate volume level, there is noise or an echo, sound quality is poor or other caller cannot hear your voice.
Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check
Click here
Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
Click here
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly"
Click here
Navigation receiver assembly
Click here
"Bluetooth" Audio Function 
Symptom
Suspected Area
See page
Portable player cannot be registered
Proceed to "Portable Player cannot be Registered"
Click here
Navigation receiver assembly
Click here
Portable player cannot be connected manually/automatically
Proceed to "Portable Player cannot be Registered"
Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically"
Click here
Navigation receiver assembly
Click here
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth"
Proceed to "Portable Player cannot be Registered"
Click here
Proceed to "Portable Player cannot be Connected Manually/Automatically"
Click here
Navigation receiver assembly
Click here
Sound of portable player cannot be heard from speakers, or sound is low
Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"
Click here
Navigation receiver assembly
Click here
Portable player does not play even after "Bluetooth" audio mode is selected
Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
Click here
Navigation receiver assembly
Click here
Portable player does not play
Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
Click here
Navigation receiver assembly
Click here
Track information such as track number, track name, elapsed play time and playlist is not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation receiver assembly
Click here
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation receiver assembly
Click here
Battery condition of portable player is not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation receiver assembly
Click here
"Bluetooth" signal condition is not displayed
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation receiver assembly
Click here
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan
Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
Click here
Navigation receiver assembly
Click here
Noise occurs or sound skips when portable player plays
Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"
Click here
Navigation receiver assembly
Click here
Registered device cannot be deleted
Proceed to "Registered Device cannot be Deleted"
Click here
Navigation receiver assembly
Click here
USB Audio System Function 
Symptom
Suspected Area
See page
USB audio system sound cannot be heard or sound quality is bad (USB connector is used)
Proceed to "Data Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
USB device or "iPod" is not recognized
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Track information such as track, artist and album names are not displayed
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
USB device or "iPod" is recognized but cannot play, or can play but not in a sorted order
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Album cover art cannot be displayed
Check that Display Cover Art on the "iPod" Settings screen is set to on
-
Check if similar symptoms occur with another vehicle
-
If an indication to update the Gracenote database appears on the album cover art screen and update data has been downloaded to the Navigation receiver assembly, update the Gracenote database to the latest version.
-
Navigation receiver assembly
Click here
User set album cover art cannot be displayed
Check that a JPEG file is used for the album cover art registered to the music data in the USB device or "iPod" - Navigation receiver assembly
-
Navigation receiver assembly
Click here
"iPod" battery cannot be charged
Proceed to "USB Audio System Recognition/Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Screen is distorted or not displayed only when using the video function of an "iPod"
Check if "iPod" is set to output images
-
Proceed to "USB Audio System Outline" in System Description and check if the "iPod" is compatible with the navigation receiver assembly
Click here
Check if the appropriate image signal setting (NTSC/ PAL) is selected
-
Check if video sound input is set to "A/V"
-
Connect using a known good cable and check if the image is output
-
Proceed to "Display Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Customize Startup Image or Screen Off Image Function 
Symptom
Suspected Area
See page
Screen cannot be changed to UIC setting screen
Navigation receiver assembly
Click here
Thumbnails for opening image setting or screen off image setting do not update when USB device is connected
Check that the USB device was not disconnected while transferring an image
-
Check that the screen was not changed to another function menu while transferring an image
-
Proceed to "USB Audio System Recognition/ Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Transfer button cannot be pressed
Check that a USB device is connected
-
Check that the USB device is not in use (USB audio system is playing etc.)
-
Proceed to "USB Audio System Recognition/ Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Image data in USB device cannot be displayed
Check that the designated folder name is used
-
Check that the file extension of the data is JPG or JPEG
-
Check that the file name is 32 characters or less and available language is used
-
Check that the image data size is 10 MB or less
-
Check that the file system of the USB device is FAT16 or FAT32
-
Proceed to "USB Audio System Recognition/ Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Set opening image or screen off image is not displayed
Check if it is the first start-up after disconnecting and reconnecting the +B terminal
-
Set the opening image or screen off image again
-
Navigation receiver assembly
Click here
Stored image cannot be deleted
Navigation receiver assembly
Click here
Message indicating that USB device cannot be accessed is displayed
Check that the USB device has not been disconnected while the navigation system is recognizing it
-
Proceed to "USB Audio System Recognition/ Play Error"
Click here
No. 1 stereo jack adapter assembly
Click here
Navigation receiver assembly
Click here
Thumbnail images for opening image or screen off image are not displayed on setting screen
Check if it is the first start-up after disconnecting and reconnecting the +B terminal
-
Set the opening image or screen off image again
-
Navigation receiver assembly
Click here
Image cannot be set for opening image or screen off image on setting screen
Set the opening image or screen off image again
-
Navigation receiver assembly
Click here
Fuel Consumption Function 
Symptom
Suspected Area
See page
"Fuel Consumption" icon is dimmed
Check if other icons or items displayed on screen have any problems
-
Navigation receiver assembly
Click here
Graph is not displayed on "Trip Information" screen
Recheck with the engine running
-
Navigation receiver assembly
Click here
Cruise range is not displayed on "Trip Information" screen
Turn engine switch on (IG) and recheck
-
Navigation receiver assembly
Click here
Graph is not updated on "Past record" screen even though "Clear" is selected
Turn engine switch on (IG) and recheck
-
Navigation receiver assembly
Click here
Graph is not displayed on "Past record" screen
Turn engine switch on (IG) and recheck
-
Navigation receiver assembly
Click here
← OPERATION CHECK (from Aug 2014)PROBLEM SYMPTOMS TABLE (from Aug 2014) →