Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › from 2016.08
RM2660E _58 Vehicle Interior _052849 INTERIOR PANELS / TRIM _0255717 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1. TABLE OF BOLT, SCREW AND NUT

HINT:

All bolts, screws and nuts relevant to installing and removing the instrument panel are shown along with their alphabet code in the table below.


B433401E03
0.156,0.167 0.531,0.333 0.375,0.167 10 false Code 1.208,0.146 1.646,0.313 0.438,0.167 10 false Shape 2.469,0.135 2.844,0.302 0.375,0.167 10 false Code 3.51,0.146 3.948,0.313 0.438,0.167 10 false Shape 4.792,0.167 5.167,0.333 0.375,0.167 10 false Code 5.875,0.156 6.313,0.323 0.438,0.167 10 false Shape 0.198,0.99 0.49,1.146 0.292,0.156 10 false <A> 0.208,2.302 0.5,2.458 0.292,0.156 10 false <D> 2.521,1 2.813,1.156 0.292,0.156 10 false <B> 2.521,2.313 2.813,2.469 0.292,0.156 10 false <E> 4.823,0.99 5.115,1.146 0.292,0.156 10 false <C> 4.125,0.552 4.365,0.729 0.24,0.177 10 false φ 6 4.094,0.719 4.563,0.896 0.469,0.177 10 false (0.236) 1.75,0.594 1.99,0.771 0.24,0.177 10 false φ 5 1.677,0.75 2.146,0.927 0.469,0.177 10 false (0.197) 6.365,1.115 6.719,1.271 0.354,0.156 10 false L=18 6.365,1.292 6.844,1.479 0.479,0.188 10 false (0.709) 1.698,1.135 2.052,1.292 0.354,0.156 10 false L=15 1.698,1.302 2.177,1.49 0.479,0.188 10 false (0.591) 5.604,3.188 7.063,3.375 1.458,0.188 10 false mm (in.) (L = Length) 4.823,2.292 5.115,2.448 0.292,0.156 10 false <F> 1.771,1.927 2.01,2.104 0.24,0.177 10 false φ 8 1.781,2.083 2.25,2.26 0.469,0.177 10 false (0.315) 1.76,2.438 2.115,2.594 0.354,0.156 10 false L=20 1.76,2.635 2.24,2.823 0.479,0.188 10 false (0.787) 4.156,1.135 4.51,1.292 0.354,0.156 10 false L=21 4.083,1.271 4.563,1.458 0.479,0.188 10 false (0.827) 6.385,0.563 6.625,0.74 0.24,0.177 10 false φ 5 6.323,0.719 6.792,0.896 0.469,0.177 10 false (0.197) 4.167,1.917 4.406,2.094 0.24,0.177 10 false φ 6 4.135,2.073 4.604,2.25 0.469,0.177 10 false (0.236) 4.156,2.458 4.51,2.615 0.354,0.156 10 false L=16 4.156,2.656 4.635,2.844 0.479,0.188 10 false (0.630) 6.313,2.177 6.552,2.354 0.24,0.177 10 false φ 6 6.281,2.344 6.75,2.521 0.469,0.177 10 false (0.236)

Hide 2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (w/ Cool Box)

Hide 3.DISABLE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)

a.

Disable the autoaway/return function by changing the customize parameter.

Click hereSteering>STEERING COLUMN>POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM>CUSTOMIZE PARAMETERS

CAUTION:

Record the current customize parameter setting (whether the autoaway/return function is enabled or disabled) in order to restore the current setting after finishing the operation.


HINT:

Performing the above operation causes the autoaway/return function to be disabled when the engine switch is turned off.



b.

Turn the ignition switch on (IG). Operate the tilt and telescopic switch to fully extend and lower the steering column assembly.


c.

Turn the ignition switch off.


Hide 4. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 5.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here


Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

Hide 6.REMOVE FRONT SEAT ASSEMBLY LH

Hide 84140 8.REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

Hide 58901A 9.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

Hide 88520 10.REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

Hide 58812A 11.REMOVE LOWER CONSOLE BOX (w/o Console Box Lid)

Hide 55318C 12.REMOVE INSTRUMENT SIDE PANEL LH

B432495C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the instrument side panel LH.


b.

Using a moulding remover A, detach the 6 claws and remove the instrument side panel LH.


Hide 55474C 13.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

U155986C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 1 instrument cluster finish panel garnish.


b.

Using a moulding remover A, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.


Hide 55475A 14.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

U155987C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 2 instrument cluster finish panel garnish.


b.

Using a moulding remover A, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.


Hide 55404C 15.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

U155988C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 2 instrument cluster finish panel sub-assembly.


b.

Detach the 9 claws.


c.

Remove the No. 2 instrument cluster finish panel sub-assembly.


d.

w/ Light Control Rheostat:

Disconnect the connector.


e.

w/ Blind Spot Monitor System:

Disconnect the connector.


Hide 83100 16.REMOVE COMBINATION METER ASSEMBLY

B432499

a.

Remove the 4 screws.


b.

Disconnect the connectors and remove the combination meter assembly.


Hide 67914B 17.REMOVE FRONT DOOR SCUFF PLATE LH

Hide 55606 18.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

B452057C01
2.115,0.448 2.281,0.635 0.167,0.188 10 true *a 2.958,0.635 3.125,0.823 0.167,0.188 10 true *a
*a Screw <A>


a.

for Automatic Transmission:

i.

Remove the 2 screws <A>.


ii.

Detach the 3 claws and 2 guides.


iii.

Disconnect the connector and remove the No. 1 instrument panel under cover sub-assembly.



b.
B452047C01
1.646,0.344 1.958,0.542 0.313,0.198 10 false *a 2.833,0.719 3.021,0.917 0.188,0.198 10 true *a
*a Screw <A>


for Manual Transmission:

i.

Remove the 2 screws <A>.


ii.

Detach the 2 claws and guide.


iii.

Disconnect the connector and remove the No. 1 instrument panel under cover sub-assembly.



Hide 62112 19.REMOVE COWL SIDE TRIM BOARD LH

U155989C01
2.437,0.892 2.629,1.071 0.192,0.179 10 *a
*a Cap Nut


a.

Remove the cap nut.


b.

Detach the 2 clips and remove the cowl side trim board LH.


Hide 55432D 20.REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

U155756C01
0,0 0,0 false
V100155

Protective Tape


a.

Using a screwdriver, detach the 2 claws and open the hole cover.

HINT:

Tape the screwdriver tip before use.



b.
U155990C01
1.188,1.719 1.375,1.896 0.188,0.177 10 false *a 3.073,1.615 3.26,1.792 0.188,0.177 10 false *a
*a Bolt <B>
V100155

Protective Tape


Put protective tape around the lower No. 1 instrument panel finish panel.


c.

Remove the 2 bolts <B>.


d.

w/ Driver Side Knee Airbag:

i.

Detach the 16 claws.

B434077



e.

w/o Driver Side Knee Airbag:

i.

Detach the 9 claws.

B434078



f.

for Automatic Air Conditioning System:

i.
B180296

Detach the 2 claws and remove the room temperature sensor.



g.
B181942

Detach the 2 claws and disconnect the 2 control cables.


h.

Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.


Hide 55446A 21.REMOVE NO. 1 SWITCH HOLE BASE

U155991C01
0.917,1.021 0.917,1.031 false
V100155

Protective Tape


a.

Put protective tape around the No. 1 switch hole base.


b.

Detach the 4 claws.


c.

Disconnect the connectors and remove the No. 1 switch hole base.


Hide 73900 22.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

Hide 55303B 23.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

U163956C01
0.799,1.869 0.990,2.048 0.192,0.179 10 *a 1.796,1.606 1.988,1.785 0.192,0.179 10 *a 2.667,1.034 2.859,1.213 0.192,0.179 10 *a 2.872,0.618 3.064,0.797 0.192,0.179 10 *a 1.584,0.868 1.775,1.047 0.192,0.179 10 *a
*a Bolt <B>


a.

Detach the 2 claws and disconnect the DLC3.


b.

Remove the 5 bolts <B> and lower instrument panel sub-assembly.


Hide 55650 24.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

U155992C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 1 instrument panel register assembly.


b.

Detach the 4 claws and remove the No. 1 instrument panel register assembly.


Hide 55317A 25.REMOVE INSTRUMENT SIDE PANEL RH

U155993C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the instrument side panel RH.


b.

Using a moulding remover A, detach the 6 claws and remove the instrument side panel RH.


c.

w/ Airbag Cut Off Switch:

i.

Disconnect the connector and remove the instrument side panel RH.



Hide 67913B 26.REMOVE FRONT DOOR SCUFF PLATE RH

Hide 55607 27.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

B432506

a.

Detach the 4 claws and 3 guides.


b.

Disconnect the connector and remove the No. 2 instrument panel under cover sub-assembly.


Hide 62111C 28.REMOVE COWL SIDE TRIM BOARD RH

U155994C01
0.696,0.961 0.888,1.140 0.192,0.179 10 *a
*a Cap Nut


a.

Remove the cap nut.


b.

Detach the 2 clips and remove the cowl side trim board LH.


Hide 73990 29.REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

Hide 55312 30.REMOVE LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

U163957C01
0.5,1.555 0.692,1.734 0.192,0.179 10 *a 2.475,1.852 2.666,2.031 0.192,0.179 10 *a
*a Bolt <B>


a.

Remove the 2 bolts <B>.


b.

Detach the 4 claws and remove the lower instrument panel.


Hide 55476A 31.REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

U155995C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 3 instrument cluster finish panel garnish.


b.

Using a moulding remover A, detach the 6 claws and remove the No. 3 instrument cluster finish panel garnish.


Hide 55443D 32.REMOVE INSTRUMENT PANEL BOX DOOR KNOB

HINT:

Use the same procedure for both instrument panel box door knobs.


a.
B182302

Using a moulding remover B, detach the 2 claws and remove the instrument panel box door knob.


Hide 55433B 33.REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

U155996C01
1.052,1.75 1.24,1.927 0.188,0.177 10 false *a 2.021,1.875 2.208,2.052 0.188,0.177 10 false *a 0.76,0.927 0.948,1.104 0.188,0.177 10 false *a 2.177,0.885 2.365,1.063 0.188,0.177 10 false *a
*a Screw <C>
V100155

Protective Tape


a.

Put protective tape around the lower No. 2 instrument panel finish panel.


b.

Remove the 4 screws <C>.


c.
B432510

Detach the 3 claws.


d.

Disconnect the connector and remove the lower No. 2 instrument panel finish panel.


Hide 55660 34.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

U155997C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 2 instrument panel register assembly.


b.

Detach the 4 claws and remove the No. 2 instrument panel register assembly.


Hide 55670 35.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

for Type A:

i.
U155998C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the No. 3 instrument panel register assembly.


ii.
B432513

Using moulding remover B, raise the No. 3 instrument panel register assembly.


iii.
B432514

Pull the No. 3 instrument panel register assembly by hand to detach the 7 claws and guide and remove the No. 3 instrument panel register assembly.



b.

for Type B:

i.
U164423C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the No. 3 instrument panel register assembly.


ii.
B435719

Using moulding remover B, raise the No. 3 instrument panel register assembly.


iii.
B435720

Pull the No. 3 instrument panel register assembly by hand to detach the 6 claws and remove the No. 3 instrument panel register assembly.



Hide 55680A 36.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

a.

for Type A:

i.
U155999C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the No. 4 instrument panel register assembly.


ii.
B432516

Using moulding remover B, raise the No. 4 instrument panel register assembly.


iii.
B432517

Pull the No. 4 instrument panel register assembly by hand to detach the 7 claws and guide and remove the No. 4 instrument panel register assembly.



b.

for Type B:

i.
U164424C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the No. 4 instrument panel register assembly.


ii.
B435722

Using moulding remover B, raise the No. 4 instrument panel register assembly.


iii.
B435723

Pull the No. 4 instrument panel register assembly by hand to detach the 6 claws and remove the No. 4 instrument panel register assembly.



Hide 86110B 37.REMOVE MULTI-DISPLAY ASSEMBLY (w/ Navigation System)

Hide 55412C 38.REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Navigation System)

a.

for Type A:

i.
B421870

Detach the 8 claws and 3 clips.


ii.

Disconnect the connectors and remove the No. 1 center instrument cluster finish panel.



b.

for Type B:

i.
B180653

Detach the 10 claws.


ii.

Disconnect the connectors and remove the No. 1 center instrument cluster finish panel.



Hide 55522B 39.REMOVE RADIO TUNER OPENING COVER (w/o Radio Receiver)

B180654

a.

Remove the 2 bolts.


b.

Remove the 2 screws and radio tuner opening cover.


Hide 86140A 40.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

Hide 86120 41.REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)

Hide 86130A 42.REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (w/ Navigation System)

Hide 43.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Hide 55510F 47.REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

U155950C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 1 speaker opening cover assembly.


b.

Using a moulding remover A, detach the 8 clips and remove the No. 1 speaker opening cover assembly.


Hide 55408F 48.REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

U155952C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 1 instrument panel speaker panel sub-assembly.


b.

Using a moulding remover A, detach the 3 claws and 2 guides and remove the No. 1 instrument panel speaker panel sub-assembly.


Hide 55409F 49.REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

U155951C01
0,0 0,0 false
V100155

Protective Tape


a.

Put protective tape around the No. 2 instrument panel speaker panel sub-assembly.


b.

Using a moulding remover A, detach the 3 claws and 2 guides and remove the No. 2 instrument panel speaker panel sub-assembly.


Hide 86160L 50.REMOVE FRONT NO. 4 SPEAKER ASSEMBLY (w/ Front Center Speaker)

Hide 86160P 51.REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

HINT:

Use the same procedure for the RH and LH side.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


Hide 55405B 52.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

a.

w/o Wireless Charger:

i.
B432518

Detach the 6 claws.


ii.

Disconnect the connectors and remove the center instrument cluster finish panel sub-assembly.



b.

w/ Wireless Charger:

i.
B432519

Detach the 6 claws.


ii.

Disconnect the connectors and remove the center instrument cluster finish panel sub-assembly.



Hide 87212H 53.REMOVE REAR NO. 4 AIR DUCT (w/ Rear Air Duct)

B180308

a.

Fold back the front floor carpet.


b.

Detach the clip and remove the rear No. 4 air duct.


Hide 87212F 54.REMOVE REAR NO. 2 AIR DUCT (w/ Rear Air Duct)

B180309

a.

Fold back the front floor carpet.


b.

Detach the clip and remove the rear No. 2 air duct.


Hide 55400 55.REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

a.

Disconnect each connector and detach each clamp.

U164418C01
1.146,1.76 1.354,2 0.208,0.24 12 true *A 4.219,1.781 4.458,2 0.24,0.219 12 true *B
*A w/ Multi-terrain Monitor System *B w/ TOYOTA Parking Assist-sensor System



b.

Disconnect each connector and detach each clamp.


c.

Remove the 2 bolts and disconnect the wire harness.

U155757C01
6.771,1.083 6.958,1.26 0.188,0.177 10 true *a 6.792,0.833 6.979,1.01 0.188,0.177 10 true *b 6.771,1.302 6.958,1.479 0.188,0.177 10 true *a 6.75,1.573 6.938,1.75 0.188,0.177 10 true *a 4.25,5 4.438,5.177 0.188,0.177 10 true *a 4.323,5.323 4.51,5.5 0.188,0.177 10 true *a 6.76,5.375 6.948,5.552 0.188,0.177 10 true *b 3.073,5.427 3.26,5.604 0.188,0.177 10 true *a
*a Connector *b Bolt



d.
U155885C01
0.745,0.343 0.937,0.522 0.192,0.179 10 *a 0.698,0.928 0.82,0.546 false
*a Lock Slider


Pull and slide the lock slider in the direction indicated by the arrow to release the connector lock and disconnect the passenger airbag connector.

NOTICE:

When handling the passenger airbag connector, take care not to damage the airbag wire harness.



e.

Disconnect each connector.


f.

Remove the 2 passenger airbag installation bolts <D>.


g.

Remove the 6 bolts <E>.


h.

Remove the 2 nuts <F>.


i.

Remove the 2 bolts <B> and instrument panel safety pad assembly.

U156000C01
1.75,0.99 1.896,1.167 1.896,1.167 1.896,0.979 true 1.135,1.063 1.323,1.24 0.188,0.177 10 true *a 1.25,0.854 1.438,1.031 0.188,0.177 10 true *b 2.021,0.625 2.208,0.802 0.188,0.177 10 true *c 0.792,0.625 0.979,0.802 0.188,0.177 10 true *c 1.906,1.094 2.094,1.271 0.188,0.177 10 true *b 6.656,1.417 6.844,1.594 0.188,0.177 10 false *d 0.208,3.188 0.396,3.365 0.188,0.177 10 false *d 5.115,2.604 5.302,2.781 0.188,0.177 10 false *d 4.76,3.354 4.948,3.531 0.188,0.177 10 false *d 3.042,3.74 3.229,3.917 0.188,0.177 10 false *d 6.469,2.229 6.656,2.406 0.188,0.177 10 false *d 1.344,4.354 1.531,4.531 0.188,0.177 10 false *f 6.333,2.979 6.521,3.156 0.188,0.177 10 false *f 2.313,3.01 2.5,3.188 0.188,0.177 10 false *e 3.146,2.792 3.333,2.969 0.188,0.177 10 false *e
*a Passenger Airbag Connector *b Connector
*c Passenger Airbag Installation Bolt <D> *d Bolt <E>
*e Nut <F> *f Bolt <B>