| Heavy steering
|
Front tires (improperly inflated, unevenly worn)
|
|
| Front wheel alignment (incorrect)
|
|
| Front suspension (lower ball joint)
|
|
| Rack and pinion power steering gear assembly
|
|
| Torque sensor (Rack and pinion power steering gear assembly)
|
| Power steering motor (Rack and pinion power steering gear assembly)
|
| Steering column assembly
|
|
| Auxiliary battery and power source circuit
|
|
| Power source voltage of power steering ECU (Rack and pinion power steering gear assembly)
|
|
| CAN communication system
|
|
| Vehicle condition (Steering wheel is turned from left to right repeatedly with vehicle stopped or heavy load is continuously applied to vehicle)
|
|
| Steering effort differs between right and left or is uneven
|
Front tires (improperly inflated, unevenly worn)
|
|
| Front wheel alignment (incorrect)
|
|
| Front suspension (lower ball joint)
|
|
| Rack and pinion power steering gear assembly
|
|
| Torque sensor (Rack and pinion power steering gear assembly)
|
| Power steering ECU (Rack and pinion power steering gear assembly)
|
| Steering column assembly
|
|
| While driving, steering effort does not change in accordance with vehicle speed, or steering wheel does not return to its centered position easily
|
Electronically controlled brake system
|
|
| Torque sensor (Rack and pinion power steering gear assembly)
|
|
| Power steering motor (Rack and pinion power steering gear assembly)
|
| Power steering ECU (Rack and pinion power steering gear assembly)
|
| CAN communication system
|
|
| Friction sounds occur when turning steering wheel during low speed driving
|
Power steering motor (Rack and pinion power steering gear assembly)
|
|
| Steering column assembly
|
|
| Spiral cable sub-assembly
|
|
| Steering column cover contacting steering wheel assembly
|
|
| High-pitched sound (squeaking) occurs when turning steering wheel slowly with vehicle stopped
|
Power steering motor (Rack and pinion power steering gear assembly)
|
|
| Steering wheel installation (incorrect)
|
|
| Steering wheel vibrates and noise occurs when turning steering wheel from lock to lock
|
Power steering motor (Rack and pinion power steering gear assembly)
|
|
| Steering column assembly
|
|
| Steering wheel installation (incorrect)
|
|
| Drive mode does not change
|
Refer to the "drive mode select switch circuit" of the hybrid control system
|
|
| EPS warning light remains on
|
Refer to the "vehicle control history" of the power steering system
|
|
| EPS warning light circuit
|
|