Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PARKING SUPPORT BRAKE SYSTEM (for HV Model) › from 2020.05
RM3620E _56 Audio / Visual / Telematics _076129 PARK ASSIST / MONITORING _0370838 PARKING SUPPORT BRAKE SYSTEM(for HV Model) T

PARK ASSIST / MONITORING  PARKING SUPPORT BRAKE SYSTEM(for HV Model)  PROBLEM SYMPTOMS TABLE  


NOTICE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



*1: for LHD

*2: for RHD

*3: w/ Blind Spot Monitor System

*4: w/ Panoramic View Monitor System

*5: for 2WD with NICKEL METAL HYDRIDE BATTERY

*6: for 4WD/AWD with NICKEL METAL HYDRIDE BATTERY

*7: for 2WD with LITHIUM-ION BATTERY

*8: for 4WD/AWD with LITHIUM-ION BATTERY


General
Symptom Suspected Area Link
System does not operate at all TOYOTA parking assist-sensor system Click here
CAN communication system Click here
Blind spot monitor system*3 Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here

Sonar Function
Symptom Suspected Area Link
Detection function operates when the operating conditions are not met Hybrid control system*5 Click here
Hybrid control system*6 Click here
Hybrid control system*7 Click here
Hybrid control system*8 Click here
Brake booster with master cylinder assembly (skid control ECU)*1 Click here
Brake booster with master cylinder assembly (skid control ECU)*2 Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
Detection function operates when vehicle is not within the required speed range (speedometer not malfunctioning) CAN communication system Click here
Clearance warning ECU assembly*1
Clearance warning ECU assembly*2 Click here

Buzzer Function
Symptom Suspected Area Link
Parking support brake system is normal but buzzer operation is intermittent Check that the temporary mute or auto mute function is not operating -
Proceed to "No.1 Clearance Warning Buzzer Circuit" Click here
Proceed to "No.2 Clearance Warning Buzzer Circuit" Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
Combination meter assembly Click here

Display Function
Symptom Suspected Area Link
While the parking support brake system is operating, no parking support brake notifications are displayed on the multi-information display. CAN communication system Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
Combination meter assembly Click here
While the parking support brake system is operating, no parking support brake notifications are displayed on the radio and display receiver assembly.*4 CAN communication system Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
Parking assist ECU Click here
Radio and display receiver assembly Click here
"PKSB Malfunction Visit Your Dealer" is displayed CAN communication system Click here
Combination meter assembly Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
"PKSB Unavailable" is displayed Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point (Parking support brake system registration) Click here
CAN communication system Click here
Combination meter assembly Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
Parking support brake system does not operate when there is a possibility of a collision (Warning message "PKSB Unavailable" not displayed) Check the installation of the ultrasonic sensors (front) Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front) Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
Parking support brake system control operates when there is no possibility of a collision Check the installation of the ultrasonic sensors (front) Click here
Check the installation of the ultrasonic sensors (rear) Click here
Adjust the installation of the ultrasonic sensors as necessary. Click here
Ultrasonic sensors (front) Click here
Ultrasonic sensors (rear) Click here
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
Parking support brake system control cannot be turned off (PKSB OFF indicator does not illuminate) Combination meter assembly: Perform Active Test Click here
Steering pad switch assembly Click here
Spiral cable sub-assembly Click here
Harness or connector -
Clearance warning ECU assembly*1 Click here
Clearance warning ECU assembly*2 Click here
PKSB OFF indicator blinks If "Yes" is displayed for the Data List item "BSM Radar Communication Invalid History", the blind spot monitor system may be malfunctioning.*3 Click here
Check that no foreign matter is attached to the ultrasonic sensors. -
Steering angle neutral point (Parking support brake system registration) Click here