Home › Vehicle Interior › SEAT › REAR POWER SEAT CONTROL SYSTEM › from 2016.05
RM24M0E _58 Vehicle Interior _059567 SEAT _0291996 REAR POWER SEAT CONTROL SYSTEM T

SEAT  REAR POWER SEAT CONTROL SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuse and relays related to the system before inspecting the suspected areas below.



Rear power seat control system
Symptom Suspected Area See page
No functions operate. 1. Power source circuit (Click here)
2. Fold seat control ECU -
3. Initialization (Click here)
The folding-down function does not operate. 1. Park/Neutral position switch circuit (Click here)
2. Back door courtesy switch circuit (Click here)
3. Lock switch circuit (Click here)
4. Reclining motor circuit (Click here)
5. Fold seat switch circuit (Click here)
6. Folding motor circuit (Click here)
7. Folding motor -
8. Fold seat control ECU -
9. Initialization (Click here)
The return function does not operate. 1. Park/Neutral position switch circuit (Click here)
2. Back door courtesy switch circuit (Click here)
3. Reclining motor circuit (Click here)
4. Folding motor circuit (Click here)
5. Fold seat switch circuit (Click here)
6. Release actuator circuit (Click here)
7. Folding motor -
8. Release actuator -
9. Fold seat control ECU -
10. Initialization (Click here)
The stowing function does not operate. 1. Park/Neutral position switch circuit (Click here)
2. Back door courtesy switch circuit (Click here)
3. Reclining motor circuit (Click here)
4. Folding motor circuit (Click here)
5. Fold seat switch circuit (Click here)
6. Fold lock switch circuit (Click here)
7. Folding motor -
8. Fold seat control ECU -
9. Initialization (Click here)
The reclining function does not operate. 1. Lock switch circuit (Click here)
2. Reclining motor circuit (Click here)
3. Rear power seat switch circuit (Click here)
4. Fold seat control ECU -
5. Initialization (Click here)
The indicator does not come on or blink. 1. Indicator circuit (Click here)
2. Combination meter (for RHD) (Click here)
3. Fold seat control ECU -
4. Initialization (Click here)