Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › 2013.08–2014.11
RM2070E _56 Audio / Visual / Telematics _061931 AUDIO / VIDEO _0301730 AUDIO AND VISUAL SYSTEM T

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Display Function
Symptom Suspected Area See page
Pressing power switch does not turn on system Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Black screen (No image appears on navigation/audio screen) Proceed to "Black Screen" (Click here)
Proceed to "Check Software Error History" in Operation Check (Click here)
Radio and display receiver assembly (Click here)
Display does not dim (does not change to night screen) with tail switch on Proceed to "Display does not Dim when Light Control Switch is Turned ON" (Click here)
Proceed to "Illumination Circuit" (Click here)
Radio and display receiver assembly (Click here)
Power does not turn off (Screen remains on) Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Screen is distorted Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Screen flicker or color distortion Proceed to "Screen Flicker or Color Distortion" (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Parking brake switch signal does not change in vehicle signal check mode Proceed to "Parking Brake Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)
Reverse signal does not change in vehicle signal check mode Proceed to "Reverse Signal Circuit" (Click here)
Radio and display receiver assembly (Click here)

Panel Switch and Touch Switch Function
Symptom Suspected Area See page
Illumination for panel switches does not come on with tail switch on Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON" (Click here)
Proceed to "Illumination Circuit" (Click here)
Radio and display receiver assembly (Click here)
Panel switches do not function Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)
Touch panel switch does not function Proceed to "Touch Panel Switch does not Function" (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio and display receiver assembly (Click here)

Steering Pad Switch Function
Symptom Suspected Area See page
System cannot be operated by steering pad switch Proceed to "Panel Switches do not Function" (Click here)
Proceed to "Steering Pad Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)
Illumination for steering pad switch does not come on with tail switch on Proceed to "Illumination Circuit" (Click here)
Radio and display receiver assembly (Click here)

General Audio Function
Symptom Suspected Area See page
No sound can be heard from speakers Proceed to "No Sound can be Heard from Speakers" (Click here)
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"*1 (Click here)
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"*1 (Click here)
Proceed to "Speaker Circuit" (Click here)
Stereo component amplifier assembly*1 (Click here)
Radio and display receiver assembly (Click here)
Abnormal noise occurs Proceed to "Noise Occurs" (Click here)
Stereo component amplifier assembly*1 (Click here)
Radio and display receiver assembly (Click here)
Sound quality is bad in all modes (Volume is too low) Check that the ASL function is off -
Proceed to "Poor Sound Quality in All Modes (Low Volume)" (Click here)
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"*1 (Click here)
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"*1 (Click here)
Proceed to "Speaker Circuit" (Click here)
Stereo component amplifier assembly*1 (Click here)
Radio and display receiver assembly (Click here)
ASL does not function Check that the ASL function is on -
Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"*2 (Click here)
Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"*1 (Click here)
Stereo component amplifier assembly*1 (Click here)
Radio and display receiver assembly (Click here)
Voice guidance does not function Proceed to "Voice Guidance does not Function" (Click here)
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"*1 (Click here)
Proceed to "Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier"*1 (Click here)
Proceed to "Speaker Circuit" (Click here)
Radio and display receiver assembly (Click here)
Stereo component amplifier assembly*1 (Click here)

*1: for 8 Speakers

*2: for 6 Speakers


FM or AM Radio Function
Symptom Suspected Area See page
Radio broadcast cannot be received or poor reception Proceed to "Radio Broadcast cannot be Received or Poor Reception" (Click here)
Radio broadcast can be received but radio station cannot be displayed (Some radio stations do not provide their name information) Radio and display receiver assembly (Click here)

CD Player Function
Symptom Suspected Area See page
CD cannot be inserted/played or CD is ejected right after insertion Proceed to "Check Optical Disc Error History" in Operation Check (Click here)
Proceed to "CD cannot be Inserted / Played or CD is Ejected Right After Insertion" (Click here)
CD cannot be ejected Proceed to "Check Optical Disc Error History" in Operation Check (Click here)
Proceed to "CD cannot be Ejected" (Click here)
CD sound skips Proceed to "Check Optical Disc Error History" in Operation Check (Click here)
Proceed to "CD Sound Skips" (Click here)
Sound quality is bad only when CD is played (Volume is too low) Proceed to "Check Optical Disc Error History" in Operation Check (Click here)
Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" (Click here)

AUX Function
Symptom Suspected Area See page
External device sound cannot be heard or sound quality is bad (Stereo jack is used) Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
"AUX" is not displayed on system check mode screen Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)

"Bluetooth" Hands-free Function
Symptom Suspected Area See page
Bluetooth is inoperative Proceed to "Microphone Circuit between Microphone and Radio Receiver" (Click here)
Radio and display receiver assembly (Click here)
Cellular phone registration failure Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure" (Click here)
Radio and display receiver assembly (Click here)
Cellular phone cannot make outgoing/incoming calls or call in a certain place Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls" (Click here)
Proceed to "Steering Pad Switch Circuit" (Click here)
Radio and display receiver assembly (Click here)
Message that prompts to check the cellular phone is displayed Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls" (Click here)
Radio and display receiver assembly (Click here)
Phonebook data cannot be transferred manually or automatically Check the automatically download contact setting -
Enter "1234" into the "Bluetooth" phone (When transferring phonebook data, OBEX authentication may be required) -
Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure" (Click here)
Radio and display receiver assembly (Click here)
Volume of other caller's voice is not at an appropriate volume level, there is noise, sound quality is poor or other caller's voice cannot be heard Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check (Click here)
Proceed to "The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted" (Click here)
Radio and display receiver assembly (Click here)
Other caller cannot hear your voice at an appropriate volume level, there is noise or an echo, sound quality is poor or other caller cannot hear your voice Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check (Click here)
Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted" (Click here)
Proceed to "Microphone Circuit between Microphone and Radio Receiver" (Click here)
Radio and display receiver assembly (Click here)

"Bluetooth" Audio Function
Symptom Suspected Area See page
Portable player cannot be registered Proceed to "Portable Player cannot be Registered" (Click here)
Radio and display receiver assembly (Click here)
Portable player cannot be connected manually/automatically Proceed to "Portable Player cannot be Registered" (Click here)
Proceed to "Portable Player cannot be Connected Manually/Automatically" (Click here)
Radio and display receiver assembly (Click here)
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth" Proceed to "Portable Player cannot be Registered" (Click here)
Proceed to "Portable Player cannot be Connected Manually/Automatically" (Click here)
Radio and display receiver assembly (Click here)
Sound of portable player cannot be heard from speakers, or sound is low Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low" (Click here)
Radio and display receiver assembly (Click here)
Portable player does not play even after "Bluetooth" audio mode is selected Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" (Click here)
Radio and display receiver assembly (Click here)
Portable player does not play Proceed to "Does not Play even after Bluetooth Audio Mode is Selected" (Click here)
Radio and display receiver assembly (Click here)
Track information such as track number, track name and elapsed play time and playlist is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Battery condition of portable player is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
"Bluetooth" signal condition is not displayed Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device" (Click here)
Radio and display receiver assembly (Click here)
Noise occurs or sound skips when portable player plays Proceed to "Noise Occurs or Sound Skips when Portable Player Plays" (Click here)
Radio and display receiver assembly (Click here)
Registered device cannot be deleted Proceed to "Registered Device cannot be Deleted" (Click here)
Radio and display receiver assembly (Click here)

USB Audio System Function
Symptom Suspected Area See page
USB audio system sound cannot be heard or sound quality is bad (USB connector is used) Proceed to "Data Signal Circuit between Radio Receiver and Stereo Jack Adapter" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
USB device or "iPod" is not recognized Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Track information such as track, artist and album names are not displayed Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
USB device or "iPod" is recognized but cannot play nor play in a sorted order Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)
Album cover art cannot be displayed Check that display cover art on the "iPod" Settings screen is set to on -
Check that a JPEG file is used for the cover art -
"iPod" battery cannot be charged Proceed to "USB Audio System Recognition/Play Error" (Click here)
No. 1 stereo jack adapter assembly (Click here)
Radio and display receiver assembly (Click here)

Fuel Consumption Function
Symptom Suspected Area See page
Graph is not displayed on "Trip Information" screen Recheck with the hybrid system operating -
Radio and display receiver assembly (Click here)
Cruise range is not displayed on "Trip Information" screen Turn power switch on (READY) and recheck -
Radio and display receiver assembly (Click here)
Graph is not updated on "Past record" screen even though "Clear" is selected Turn power switch on (READY) and recheck -
Radio and display receiver assembly (Click here)
Graph is not displayed on "Past record" screen Turn power switch on (READY) and recheck -
Radio and display receiver assembly (Click here)